1. Прадукт скончыўсяview
The OSRAM Base Classic A FIL 40 LED Bulb is a modern, energy-efficient lighting solution designed for general illumination in household and interior applications. This LED bulb provides a warm white light (2700 Kelvin) with a brightness of 470 lumens, equivalent to a traditional 40-watt incandescent bulb, while consuming only 4 watts of power. It features an E27 screw base for easy installation and a long operational life of up to 10,000 hours.
Асноўныя функцыі ўключаюць у сябе:
- Pleasant Light: Delivers good light quality and instant 100% light without warm-up time.
- Трывалы дызайн: Resistant to shocks and vibrations due to advanced LED technology.
- Працяглы тэрмін службы: Offers an extended operational life of up to 10,000 hours.
- энергазберажэнне: Very low energy consumption, making it highly efficient.
- Аптымальная тэмпература: Generates lower heat compared to standard incandescent bulbs.
Figure 1: OSRAM Base Classic A FIL 40 LED Bulb, showcasing its classic shape and E27 base.
2. Інфармацыя па бяспецы
- Электрабяспека: Always ensure the power supply is switched off before installing, removing, or cleaning the bulb to prevent electric shock.
- тtage Сумяшчальнасць: This bulb is designed for 220-240 Volts. Ensure your fixture's voltagе адпавядае гэтаму патрабаванню.
- Сумяшчальнасць дыммера: Гэты прадукт not suitable for use with dimmers. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
- Унутранае выкарыстанне: Primarily for indoor use. If used outdoors, it must be installed in a suitable, enclosed outdoor fixture to protect it from elements.
- Выпрацоўка цяпла: While LED bulbs generate less heat than incandescent bulbs, they still produce some heat. Ensure adequate ventilation around the bulb.
- Утылізацыя: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.
3. Настройка і ўстаноўка
Follow these steps to safely install your OSRAM LED bulb:
- Выключэнне: Before beginning, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
- Выдаліць старую лямпачку: If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E27 socket.
- Праверце разетку: Check the E27 socket for any damage or debris. Ensure it is clean and dry.
- Усталяваць новую лямпачку: Gently screw the OSRAM LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
- Аднавіць сілу: Once the bulb is securely installed, restore power to the light fixture.
- тэст: Уключыце выключальнік святла, каб пераканацца, што лямпачка працуе правільна.
Figure 2: Close-up of the OSRAM LED bulb, highlighting the E27 screw base for installation.
4. Аперацыя
Operating the OSRAM Base Classic A FIL 40 LED Bulb is straightforward:
- Уключыць/выключыць: Use the standard wall switch connected to your light fixture to turn the bulb on or off.
- Імгненнае святло: The LED bulb provides instant 100% light output immediately upon switching on, with no warm-up time required.
- Не зацямняецца: As noted in the safety section, this bulb is not dimmable. It will operate at full brightness when switched on.
5. Тэхнічнае абслугоўванне
The OSRAM LED bulb requires minimal maintenance:
- Уборка: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Замена: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps in Section 3.
- Няма частак, якія абслугоўваюцца карыстальнікам: The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.
6. Выпраўленне непаладак
If you encounter issues with your OSRAM LED bulb, refer to the following common troubleshooting steps:
- Лямпачка не загараецца:
- Пераканайцеся, што электрасілкаванне прыбора ўключана.
- Check that the bulb is screwed in securely into the E27 socket.
- Test the bulb in another working fixture to rule out a faulty fixture.
- If the bulb still does not light up, it may be faulty and require replacement.
- Мігаценне або зацямненне:
- Confirm that the bulb is not connected to a dimmer switch, as this bulb is not dimmable.
- Check for loose connections in the fixture or wiring.
- Забяспечыць абtage supply is stable and within the bulb's specified range (220-240V).
- Незвычайны шум:
- LED bulbs are generally silent. If you hear buzzing, ensure the bulb is not on a dimmer circuit.
- Праверце наяўнасць няшчыльных злучэнняў у прыстасаванні.
7. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Марка | Кампанія OSRAM |
| Нумар мадэлі | BASECLA40 4W/827 230V FIL E27 FS2 |
| Светлы тып | святлодыёд |
| Ватtage | 4 ват |
| Эквівалент лямпы напальвання | 40 ват |
| Падстава лямпачкі | E27 |
| Яркасць | 470 люмен |
| Каляровая тэмпература | 2700 кельвінаў (цёплы белы) |
| Індэкс колераперадачы (CRI) | ≥ 80 |
| тtage | 220-240 Вольт |
| Сярэдняя жыццё | 10,000 гадзін |
| Зацямняецца | няма |
| Выкарыстанне ў памяшканні/на вуліцы | Indoor (Outdoor in suitable fixtures) |
| Матэрыял | Шкло |
| Памеры прадукту | 2.36"Ш х 2.36"В |
Figure 3: Technical drawing illustrating the dimensions of the OSRAM LED bulb. The 'd' indicates diameter and the vertical line indicates height.
Figure 4: EU Energy Label for the LEDVANCE AC32396 (OSRAM) LED bulb, indicating an energy efficiency class of E and consumption of 4 kWh/1000h. For more details, visit the official EPREL database: Спасылка на базу дадзеных EPREL.
8. Гарантыя і падтрымка
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official OSRAM webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.
