ADATA 75261083

ADATA Fusion 1600W Titanium Power Supply Unit User Manual

Мадэль: 75261083

1. Уводзіны

This manual provides essential information for the proper installation, operation, and maintenance of your ADATA Fusion 1600W Titanium Power Supply Unit (PSU). Designed for high-performance computing systems, this 80 Plus Titanium certified PSU features ATX 3.0 and PCIe 5.0 compatibility, ensuring stable and efficient power delivery. Please read this manual thoroughly before proceeding with installation or use.

2. Інфармацыя па бяспецы

  • Электрычная небяспека: Power supplies contain high voltage components. Do not open the PSU casing. Servicing should only be performed by qualified personnel.
  • Адключэнне сілкавання: Always disconnect the AC power cord from the wall outlet before installing, removing, or cleaning the PSU or any other computer components.
  • Правільнае зазямленне: Ensure your computer system and the wall outlet are properly grounded to prevent electrical shock.
  • Вентыляцыя: Do not block the ventilation openings of the PSU. Ensure adequate airflow within your computer case to prevent overheating.
  • Вільготнасць: Keep the PSU away from water, humidity, and other liquids.
  • тэмпература: Operate the PSU within the specified temperature range. Avoid extreme heat or cold.
  • Кабельнае кіраванне: Route cables carefully to avoid pinching or damage, which can lead to short circuits or fire hazards.

3. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

  • ADATA Fusion 1600W Titanium Power Supply Unit
  • Modular Cable Set (including Motherboard, CPU, PCIe/GPU, SATA, and Molex cables)
  • Шнур сілкавання
  • Крапежныя шрубы
  • Кіраўніцтва карыстальніка (гэты дакумент)

4. Настройка

4.1. Фізічная ўстаноўка

  1. Пераканайцеся, што камп'ютар выключаны, а шнур харчавання адключаны ад разеткі.
  2. Адкрыйце корпус кампутара.
  3. Locate the PSU mounting area, typically at the bottom or top rear of the case.
  4. Carefully slide the ADATA Fusion PSU into the designated slot.
  5. Замацуйце блок харчавання да корпуса з дапамогай прыкладаемых мацавальных шруб.

4.2. Кабельныя злучэнні

The ADATA Fusion 1600W PSU is fully modular, allowing you to connect only the cables required for your system. Refer to the image below for port identification.

ADATA Fusion 1600W Titanium Power Supply Unit showing modular cable connections and fan grill.

This image displays the ADATA Fusion 1600W Titanium Power Supply Unit from an angled top-down perspective. The modular cable connection panel is visible on the left side, labeled for SATA & Molex, Prime Port - Motherboard, CPU & VGA, and 12VHPWR. The top features a fan grill with a geometric pattern, revealing the cooling fan beneath. The side of the unit shows the 'FUSION' branding.

  1. Харчаванне матчынай платы: Падключыце 24-кантактны кабель ATX ад блока харчавання да адпаведнага порта на матчынай плаце.
  2. Магутнасць працэсара: Connect the 4+4-pin or 8-pin EPS/CPU cable(s) from the PSU to the CPU power connector(s) on your motherboard.
  3. PCIe/GPU Power: Connect the appropriate 6+2-pin or 12VHPWR PCIe 5.0 cables from the PSU to your graphics card(s). Ensure all required power connectors on your GPU are utilized.
  4. SATA/Molex Power: Connect SATA power cables to your storage drives (HDDs, SSDs) and optical drives. Use Molex cables for other peripherals as needed.
  5. Перыферыйныя злучэнні: Connect any other necessary cables for case fans, RGB controllers, or other components.
  6. Магутнасць пераменнага току: Once all internal connections are made, connect the AC power cord to the PSU and then to a grounded wall outlet.

5. Аперацыйная

After completing the installation and cable connections:

  1. Пераканайцеся, што выключальнік харчавання на задняй панэлі блока харчавання знаходзіцца ў становішчы «ON».
  2. Уключыце камп'ютарную сістэму.
  3. The ADATA Fusion PSU is designed for efficient and stable operation. Its 80 Plus Titanium certification indicates high power efficiency, reducing heat generation and energy consumption.
  4. This PSU supports Prime Ecosystem Management Software. Refer to the ADATA website for software download and instructions on monitoring and controlling PSU performance, fan speeds, and other features.

6. Тэхнічнае абслугоўванне

  • Уборка: Periodically clean the exterior of the PSU and the fan grill to prevent dust buildup. Use compressed air to gently remove dust from the fan and internal components (ensure the PSU is powered off and unplugged).
  • Праверка кабеля: Рэгулярна правярайце ўсе кабельныя злучэнні, каб пераканацца, што яны надзейныя і не пашкоджаныя.
  • Умовы навакольнага асяроддзя: Maintain a clean, dry, and well-ventilated environment for your computer system to optimize PSU lifespan and performance.

7. Выпраўленне непаладак

If you encounter issues with your ADATA Fusion PSU, consider the following common troubleshooting steps:

  • Няма харчавання:
    • Пераканайцеся, што шнур харчавання пераменнага току надзейна падключаны як да блока харчавання, так і да разеткі.
    • Verify the PSU power switch is in the 'ON' position.
    • Праверце разетку з дапамогай іншай прылады, каб пераканацца, што ў ёй ёсць напружанне.
    • Ensure all modular cables are firmly seated in both the PSU and the respective components.
  • Нестабільнасць/збоі сістэмы:
    • Confirm that your PSU wattage is sufficient for all installed components.
    • Праверце наяўнасць аслабленых злучэнняў кабеляў.
    • Сачыце за тэмпературай сістэмы, каб пераканацца, што яе кампаненты не пераграваюцца.
  • Шум вентылятара:
    • Пераканайцеся, што вентылятар блока харчавання не заблакаваны кабелямі або пылам.
    • If using Prime Ecosystem Management Software, check fan speed settings.

If problems persist after attempting these steps, contact ADATA customer support for further assistance.

8. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
МаркаADATA
Назва мадэлі75261083
Ватtage1600 ват
Рэйтынг эфектыўнасці80 Plus Titanium
Версія ATXATX 3.0
Падтрымка PCIePCIe 5.0 (12VHPWR)
Формаў-фактарATX
Спосаб астуджэнняпаветра
Вага прадмета11.75 фунта
Памеры прадукту (ДxШxВ)5.5 х 15.4 х 9.7 цалі
Тып раздымаEPS (Modular)

9. Гарантыя і падтрымка

ADATA provides a limited warranty for the Fusion 1600W Titanium Power Supply Unit. For detailed warranty terms, conditions, and registration information, please visit the official ADATA webсайт або звярніцеся да гарантыйнага талона, які пастаўляецца з вашым прадуктам.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ADATA customer service through their official webсайт або кантактную інфармацыю, указаную на ўпакоўцы прадукту.

ADATA Official Webсайт: www.adata.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.