REPTITRIP Reptile Fogger User Manual

1. Уводзіны

Thank you for choosing the REPTITRIP Reptile Fogger. This device is designed to provide optimal humidity levels for amphibians, reptiles, and ecological rainforest terrariums. It features constant humidity control, a timer function, and a 4-liter capacity, ensuring a stable and healthy environment for your pets. Please read this manual thoroughly before operation to ensure proper use and maintenance.

Image 1: The REPTITRIP Reptile Fogger, showing the main unit, flexible hose, remote control, and external sensor.

2. Інструкцыі па тэхніцы бяспекі

• Always unplug the unit from the power outlet before filling, cleaning, or performing any maintenance.
• Не апускайце асноўны блок у ваду ці іншыя вадкасці.
• Ensure the power cord is not damaged and is placed where it cannot be tripped over or pulled.
• Use only clean, distilled, or demineralized water to prevent mineral buildup and ensure optimal performance.
• Захоўваць у месцах, недаступных дзецям і хатнім жывёлам.
• Не блакуйце адтуліну для выхаду пары або вентыляцыйныя адтуліны.
• Operate the unit on a stable, flat surface to prevent tipping.
• If the unit emits unusual sounds, smells, or smoke, unplug it immediately and discontinue use.

3. Змесціва ўпакоўкі

Калі ласка, праверце ўпакоўку на наяўнасць наступных прадметаў:

• REPTITRIP Reptile Fogger Main Unit (4L water tank)
• Flexible Adjustable Hose
• Пульт дыстанцыйнага кіравання
• External Temperature & Humidity Sensor Probe
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Кампаненты прадукту і схема

Familiarize yourself with the different parts of your REPTITRIP Reptile Fogger.

1. Рэзервуар для вады (ёмістасцю 4 л)
2. Base Unit with Control Panel (Touch Screen)
3. Mist Outlet Nozzle
4. Гнуткі злучальнік шланга
5. Порт вонкавага датчыка
6. Шнур харчавання
7. Пульт дыстанцыйнага кіравання

Image 2: The fogger's display highlighting the two primary operation modes: Time Setting and Humidity Control.

5. Настройка

5.1 Распакоўка і размяшчэнне

• Выдаліце ​​ўсе ўпаковачныя матэрыялы.
• Place the fogger on a flat, stable surface near the terrarium. Ensure there is enough space around the unit for proper ventilation.

5.2 Напаўненне рэзервуара для вады

1. Lift the water tank from the base unit.
2. Адкруціце вечка ў ніжняй частцы бака.
3. Fill the tank with clean, distilled, or demineralized water. Do not exceed the maximum fill line.
4. Шчыльна закруціце вечка назад.
5. Устаўце запоўнены рэзервуар для вады назад на падставу, пераканаўшыся, што ён правільна ўсталяваны.

5.3 Connecting the Hose and Sensor

• Connect one end of the flexible hose to the mist outlet nozzle on the top of the fogger.
• Route the other end of the hose into your terrarium, positioning the mist outlet where desired.
• Plug the external temperature and humidity sensor probe into its designated port on the base unit.
• Place the sensor inside the terrarium, away from the direct mist path, to accurately measure ambient conditions.

5.4 Падключэнне харчавання

• Plug the power cord into a standard electrical outlet. The unit will beep, and the display will illuminate.

6. Аперацыя

6.1 Панэль кіравання і пульт дыстанцыйнага кіравання

The fogger can be operated via the touch screen control panel on the base unit or the included remote control. Both offer similar functionalities.

• SET/ON/OFF Button: Powers the unit on/off and enters setting modes.
• Кнопка ОК: Confirms selections in setting modes.
• Кнопкі «+» і «-»: Adjust values (time, humidity, mist level) and navigate menus.

Рэжымы працы 6.2

The REPTITRIP Fogger offers two main operating modes: тэрміны Функцыя і Рэжым вільготнасці. These modes operate independently.

Image 3: The fogger's versatility for various applications, including terrarium humidification and indoor plant care.

6.2.1 Функцыя сінхранізацыі

This mode allows you to schedule humidification cycles based on specific intervals and durations.

1. Націсніце НАБОР button to enter the timing settings.
2. Выкарыстоўвайце «+» і '-' кнопкі для ўстаноўкі Частата (interval between humidification cycles, from 1 hour to 7 days). Press OK каб пацвердзіць.
3. Усталюйце Працягласць (how long the fogger will mist during each cycle, from 10 seconds to 1 hour). Press OK каб пацвердзіць.
4. The display will show the next humidification time and current humidity.

6.2.2 Humidity Mode (Constant Humidity)

This mode maintains a desired humidity range by automatically turning the fogger on and off based on sensor readings.

1. Націсніце НАБОР button until the humidity setting appears.
2. Выкарыстоўвайце «+» і '-' кнопкі для ўстаноўкі Мінімальная вільготнасць працэнтtage. Прэса OK каб пацвердзіць.
3. Усталюйце Максімальная вільготнасць працэнтtage. Прэса OK каб пацвердзіць.
4. The fogger will now automatically activate when humidity drops below the minimum and stop when it reaches the maximum. The current humidity value will be displayed.

Image 4: A graphical representation demonstrating the REPTITRIP fogger's ability to maintain a consistent humidity range.

6.3 Fog Adjustment

The fogger offers three levels of mist output, allowing you to control the rate of humidification.

• In either Timing or Humidity mode, use the «+» і '-' buttons on the control panel or remote to cycle through the three mist levels.
• Mist levels correspond to approximately 100ml/hr, 200ml/hr, and 300ml/hr water consumption.

Image 5: Visual representation of the three adjustable mist output levels.

6.4 Auto Shut-Off

The REPTITRIP Fogger is equipped with an automatic shut-off feature. When the water level in the tank is too low, an icon will appear on the display, and the atomizer will automatically power down to prevent damage and ensure safety.

7. Тэхнічнае абслугоўванне

Regular cleaning is essential for optimal performance and longevity of your fogger.

7.1 Cleaning the Water Tank and Base Unit

1. Адключыце прыладу ад сеткі і зніміце рэзервуар для вады.
2. Empty any remaining water from the tank and the base unit.
3. Wipe the inside of the water tank and the base unit (especially the transducer/atomizer disc) with a soft cloth.
4. For mineral buildup, use a solution of white vinegar and water (1:1 ratio). Let it soak for 15-20 minutes, then gently scrub with a soft brush and rinse thoroughly.
5. Перад паўторнай зборкай пераканайцеся, што ўсе дэталі цалкам сухія.

7.2 Cleaning the Hose and Sensor

• Periodically check the flexible hose for any condensation or debris. Clean with a mild soap and water solution if necessary, and rinse thoroughly.
• Wipe the external sensor probe with a dry, soft cloth. Do not use harsh chemicals or immerse the sensor in water.

8. Выпраўленне непаладак

If you encounter issues with your REPTITRIP Fogger, please refer to the following common problems and solutions:

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

This product typically comes with a limited warranty. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or REPTITRIP customer service through the platform where the product was purchased.

Палітыка вяртання: The standard return policy for this product is 30 days from the date of purchase for refund or replacement.