ELING 6-Gauge Set Instruction Manual

Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your ELING 6-Gauge Set. This set includes a GPS Speedometer, Tachometer, Fuel Level Gauge, Water Temperature Gauge, Oil Pressure Gauge, and Voltmeter. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Асаблівасці прадукту

• Поўны набор: Includes GPS Speedometer, Tachometer, Fuel Level, Water Temperature, Oil Pressure, and Voltmeter.
• Універсальнае прымяненне: Suitable for various vehicles, boats, and off-road applications.
• Высокая дакладнасць: Utilizes satellite signal reception for accurate speed measurement and stepper motors for precise gauge readings.
• Трывалы дызайн: IP67 waterproof and dustproof rating ensures reliability in harsh environments.
• Чырвоная падсветка: Provides clear visibility in all lighting conditions.
• Эфектыўная праца: Stepper motors offer low power consumption and extended lifespan.

Настройка і ўстаноўка

Proper installation is crucial for the accurate operation of your gauge set. Follow these steps carefully.

1. Gauge Installation

The set includes gauges of two different sizes: 85mm and 52mm.

Image: This diagram illustrates the required cutout dimensions (85mm and 52mm) and the necessary 70mm clearance behind the panel for gauge installation.

Image: A page from the owner's manual detailing the installation process for the 85mm gauges, including cutting the hole, inserting the gauge, and securing it with the M4 nut and C-bracket. It also shows a wiring diagram.

Image: A page from the owner's manual detailing the installation process for the 52mm gauges, including cutting the hole, inserting the gauge, and securing it with the M4 nut and C-bracket. It also shows a wiring diagram.

2. GPS Antenna Installation

1. Fix the GPS antenna securely in a flat position. The black side of the antenna must face upwards.
2. For optimal signal reception, place the antenna outside the vehicle or boat, or inside the front windshield, ensuring it has a clear view неба.
3. Connect the antenna cable to the designated socket on the rear of the GPS speedometer.
4. Важна: Do not cut or modify the antenna cable.

3. Падключэнне правадоў

Refer to the wiring diagrams provided in the owner's manual images (PT04 and PT05) for specific connections. General wiring instructions are as follows:

• Чырвоны провад: Connect to +9-32VDC power supply.
• Чорны провад: Signal Input (typically for tachometer pulse signal).
• Аранжавы провад: Connect to Backlight (+).
• Сіні провад: Connect to Ground (-).

Note: Some gauges, such as the voltmeter or hour meter, may not include a black signal input wire.

Інструкцыя па эксплуатацыі

1. Пачатковае ўключэнне

After completing the wiring, turn on the power supply. The gauges will perform a self-test. The GPS speedometer will search for satellite signals. Once a signal is acquired, it will display the current speed and total mileage.

2. GPS Speedometer Functions

• Дысплей хуткасці: Shows current speed in MPH (0-160 MPH range).
• одометр: Displays total accumulated mileage (0-999999 miles). This is a total odometer and cannot be reset.
• COG (курс адносна зямлі): Indicates the direction of travel relative to true north.
• SOG (Speed Over Ground): Displays the current speed derived from GPS.

3. Tachometer Functions

• Дысплей абаротаў у хвіліну: Shows current engine revolutions per minute (0-8000 RPM range).
• Лічыльнік гадзін: Displays total accumulated engine operating hours. This hour meter cannot be reset.
• Speed Ratio Adjustment: The tachometer's speed ratio is adjustable from 1 to 300 to match various engine types. Refer to the specific instructions included with your tachometer for adjustment procedures.

4. Other Gauges

• Датчык узроўню паліва: Displays fuel tank liquid level (E-1/2-F range) based on a 0-190ohm signal.
• Датчык тэмпературы вады: Displays water tank temperature (40-120 °C range) based on a 287.4-22.4 ohm signal.
• Oil Pressure Gauge: Displays oil pressure value (0-10 Bar / 0-145 Psi range) based on a 10-184ohm signal.
• вальтметр: Паказвае аб'ём сістэмыtage (8-16V range).

Тэхнічнае абслугоўванне

To ensure optimal performance and longevity of your ELING 6-Gauge Set, follow these general maintenance guidelines:

• Уборка: Выкарыстоўвайце мяккі, damp cloth to clean the gauge faces. Avoid abrasive cleaners or solvents that could damage the display or housing.
• Праверкі злучэння: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to inaccurate readings or intermittent operation.
• Ахова навакольнага асяроддзя: While the gauges are IP67 rated for water and dust resistance, avoid prolonged exposure to extreme temperatures or direct high-pressure water jets.

Ліквідацыю непаладак

If you encounter issues with your gauge set, refer to the following common problems and solutions:

• Няма дысплея/харчавання:
  • Check power connections (Red wire to +VDC, Blue wire to Ground).
  • Пераканайцеся, што крыніца харчавання забяспечвае правільную гучнасцьtagе (9-32В пастаяннага току).
  • Праверце наяўнасць перагарэлых засцерагальнікаў у ланцугу сілкавання.
• GPS Speedometer Displays "Err" or No Signal:
  • Ensure the GPS antenna is securely connected to the speedometer.
  • Verify the GPS antenna is placed in a location with a clear, unobstructed view неба.
  • Allow sufficient time (up to 300 seconds) for the GPS module to acquire satellite signals upon initial power-on or after relocation.
• Inaccurate Gauge Readings (Fuel, Water Temp, Oil Pressure):
  • Check the signal wire connections from the respective sensors to the gauges.
  • Ensure the sensors themselves are functioning correctly and are compatible with the gauge's signal range (e.g., 0-190ohm for fuel, 287.4-22.4 ohm for water temp, 10-184ohm for oil pressure).
• Tachometer Not Reading/Inaccurate RPM:
  • Verify the black signal input wire is correctly connected to the engine's RPM signal source.
  • Check the tachometer's speed ratio setting to ensure it matches your engine's specifications.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

ELING products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or contact ELING customer support directly. Installation instructions are provided within the product packaging.

For further assistance or technical support, please visit the official ELING webсайт або звярніцеся да прадаўца.