Уводзіны
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Vrabocry 5V 5050 RGB LED Strip Light. Please read this manual thoroughly before use to ensure proper functionality and safety.
Змест пакета
Праверце, ці ўсе пералічаныя ніжэй прадметы ўваходзяць у вашу ўпакоўку:
- 4 x LED Strip Lights (each 1.64ft / 50cm)
- 1 x 44-Key IR Remote Control (battery not included)
- 1 x USB Controller Cable
- 3 x Strip Connector Cables
Image: All components included in the Vrabocry LED Strip Light package.
Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Тып святлодыёда | SMD 5050 RGB |
| Даўжыня паласы | 4 x 1.64ft (50cm) sections |
| Шырыня друкаванай платы | 10 мм |
| Колькасць святлодыёдаў | 30 LEDs per 50cm section |
| Колер святлодыёда | RGB (Multi-color) |
| Метад кантролю | 44-Key IR Remote Control |
| Рабочы выпtage | USB DC 5V |
| Каэфіцыент воданепранікальнасці | IP30 (Non-Waterproof) |
| Клейкі | Double-sided tape on back |
| Выкарыстанне ў памяшканні/на вуліцы | Толькі для выкарыстання ў памяшканнях |
Інфармацыя па бяспецы
- This LED strip light is designed for толькі для выкарыстання ў памяшканні. It is not waterproof (IP30 rated). Avoid exposure to water or high humidity.
- Ensure the power source is 5V DC USB. Using an incorrect voltage можа пашкодзіць прадукт.
- Do not cover the LED strips with flammable materials when in operation.
- Захоўваць у месцах, недаступных дзецям.
Настройка і ўстаноўка
Follow these steps to install your LED strip lights:
- Падрыхтуйце паверхню: Clean the surface where the LED strips will be installed. Ensure it is dry and free of dust or grease for optimal adhesive performance.
- Усталюйце батарэйку пульта дыстанцыйнага кіравання: Open the battery compartment on the back of the 44-key IR remote control and insert a CR2025 button cell battery (not included), ensuring correct polarity.
- Злучыце палоскі: Connect the individual LED strip sections using the provided strip connector cables. Ensure the arrows on the connectors align with the '+' markings on the LED strips for proper electrical connection.
- Connect to USB Controller: Attach the assembled LED strip to the USB controller cable.
- Adhere the Strips: Peel off the protective backing from the double-sided tape on the back of the LED strips. Firmly press the strips onto the cleaned surface. For long-term use, consider reinforcing the adhesive with additional glue or by gently heating the tape with a hairdryer before application to improve adhesion.
- Cutting the Strips (Optional): The LED strips can be cut at designated marks (usually indicated by a scissor icon or copper pads) to fit specific lengths. Cut only along these marks to avoid damaging the circuit.
- Уключэнне: Plug the USB controller into a 5V USB power source (e.g., TV USB port, USB wall adapter, power bank).
Image: Remote control battery compartment. Battery is not included.
Image: Visual guide for surface preparation, strip connection, and cutting points.
Інструкцыя па эксплуатацыі
Use the 44-key IR remote control to manage your LED strip lights:
Image: 44-Key IR Remote Control layout and functions.
- Уключэнне/выключэнне харчавання: Націсніце ВКЛ/ВЫКЛ кнопка.
- Рэгуляванне яркасці: Выкарыстоўвайце Яркасць + і Яркасць - arrows to increase or decrease light intensity.
- Статычныя колеры: Select from 20 preset static colors, including Red, Green, Blue, and White, by pressing the corresponding color buttons.
- Налада колеру сваімі рукамі:
- Націсніце адзін з DIY1 каб DIY6 кнопкі.
- Выкарыстоўвайце Чырвоны, зялёны, сіні arrow buttons (e.g., Red+, Red-) to adjust the intensity of each primary color.
- Націсніце тое ж самае DIY button again to save your custom color.
- Дынамічныя рэжымы:
- АЎТА: Cycles through various dynamic modes automatically.
- ХУТКА/ПАВОЛЬНА: Рэгулюе хуткасць дынамічных рэжымаў.
- JUMP3/JUMP7: Jumps between 3 or 7 different colors.
- FADE3/FADE7: Fades between 3 or 7 different colors.
- УСПЛІГ: Flashes through different colors.
Тэхнічнае абслугоўванне
- Уборка: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use liquid cleaners or immerse in water.
- Клей: If the adhesive tape loses its stickiness over time, you may reinforce it with additional double-sided tape or a suitable adhesive.
- захоўванне: When not in use for extended periods, store the LED strips in a cool, dry place away from direct sunlight.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| LED strips do not light up. | No power, incorrect connection, remote battery depleted. | Ensure USB power source is active. Check all connections, especially arrow alignments. Replace remote battery. |
| Не працуе пульт дыстанцыйнага кіравання. | Battery depleted, IR receiver blocked, remote too far. | Replace remote battery. Ensure clear line of sight between remote and IR receiver on the USB controller. Operate within 5-8 meters. |
| Колеры няправільныя або неадпаведныя. | Incorrect connection, faulty strip section. | Verify all strip connector cables are correctly aligned (arrow to '+'). If one section is consistently problematic, it may be faulty. |
| Adhesive tape not sticking well. | Surface not clean, cold temperature. | Clean surface thoroughly. Gently heat the adhesive tape with a hairdryer before application to improve stickiness. Consider additional adhesive. |
Гарантыя і падтрымка
Specific warranty information for this product is not provided in the available documentation. For warranty inquiries or technical support, please contact Vrabocry customer service through your purchase platform or the manufacturer's official contact channels.