1. Прадукт скончыўсяview
The SODOLA Gigabit Ethernet Media Converter is designed to convert electrical Ethernet signals to optical fiber signals, extending network reach over long distances. It supports 10/100/1000Base-Tx to 1000Base-LX conversion and includes a SingleMode Dual LC SFP module for distances up to 20 km.
Image 1.1: SODOLA Gigabit Ethernet Media Converter showing its compact design and key ports.
Выява 1.2: Канецview of the SODOLA Gigabit Ethernet Media Converter highlighting its SFP and RJ45 ports.
2. Змесціва ўпакоўкі
Праверце, ці ёсць у вашай упакоўцы наступныя рэчы:
- 1 x Gigabit Ethernet Media Converter
- 1 x Power Adapter (5V-1A)
- 1 х Кіраўніцтва карыстальніка
- 1 x SFP SingleMode Module (1.25G, 1310-nm, 20-km)
Малюнак 2.1: Змест у камплекце з прадуктам.
3. Інструкцыі па ўсталёўцы
Follow these steps to set up your Gigabit Ethernet Media Converter:
- Connect the SFP Module: Insert the provided SFP SingleMode module into the SFP port of the media converter. Ensure it clicks into place securely.
- Падключэнне валаконна-аптычнага кабеля: Connect a SingleMode Dual LC fiber optic cable to the SFP module. Ensure the connectors are clean and properly aligned.
- Падключэнне кабеля Ethernet: Connect a Cat.5e or Cat.6 UTP/STP Ethernet cable (up to 100m) from your network device (e.g., switch, router, PC) to the RJ-45 port of the media converter. The RJ-45 port supports auto-negotiation for 10/100/1000Mbps and MDI/MDI-X auto-crossover.
- Падключыце харчаванне: Plug the 5V-1A power adapter into the DC 5.5*2.5mm power input port on the media converter, then plug the adapter into a power outlet.
- Праверка злучэнняў: Check the LED indicators on the converter to ensure proper operation (refer to Section 4 for LED status).
Малюнак 3.1: Падрабязны view of the Gigabit RJ45 Port, Gigabit SFP Port, LED Indicators, and Power Supply input.
Image 3.2: Typical application scenario demonstrating fiber to Ethernet conversion.
Image 3.3: Illustration of connecting the SFP module and RJ45 Ethernet cable.
4. Operating the Device and LED Indicators
The media converter operates automatically once powered on and connected. The LED indicators provide visual feedback on the device's status:
Image 4.1: Explanation of LED indicators on the media converter.
- PWR (магутнасць):
- Зялёны (суцэльны): DC Power is on.
- FDX (Full-Duplex):
- Зялёны (суцэльны): Full-Duplex mode is active.
- 1000M (Gigabit Speed):
- Зялёны (суцэльны): RJ-45 port speed is 1000Mbps.
- 100M (Fast Ethernet Speed):
- Зялёны (суцэльны): RJ-45 port speed is 100Mbps.
- FIBER (Fiber Port Status):
- Зялёны (суцэльны): Fiber port is working.
- Зялёны (міргае): Data is being transmitted/received (Transceive).
- TP (Twisted Pair/RJ45 Port Status):
- Зялёны (суцэльны): Network connection is established.
- Зялёны (міргае): Data is being transmitted/received (Transceive).
5. Тэхнічнае абслугоўванне
To ensure optimal performance and longevity of your media converter:
- Захоўвайце прыладу ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і крыніц цяпла.
- Забяспечце належную вентыляцыю вакол прылады.
- Regularly inspect fiber optic connectors for dust or damage. Use appropriate fiber cleaning tools if necessary.
- Avoid bending fiber optic cables beyond their minimum bend radius.
- Use only the provided power adapter or a compatible 5V-1A DC power supply.
6. Выпраўленне непаладак
If you encounter issues with your media converter, refer to the following common problems and solutions:
- Няма харчавання (святлодыёд PWR выключаны):
- Check if the power adapter is securely connected to the converter and the power outlet.
- Пераканайцеся, што разетка працуе.
- No Link on RJ-45 Port (TP LED Off/Not Flashing):
- Ensure the Ethernet cable is properly connected to both the converter and the network device.
- Verify the Ethernet cable is not damaged and is a Cat.5e or Cat.6 cable.
- Check the status of the connected network device (e.g., switch port, PC network adapter).
- No Link on Fiber Port (FIBER LED Off/Not Flashing):
- Ensure the SFP module is fully inserted into the converter.
- Check the fiber optic cable for proper connection, cleanliness, and damage.
- Verify the fiber optic cable type (SingleMode Dual LC) matches the SFP module.
- Ensure the remote fiber device is powered on and functioning correctly.
- Slow Speed (1000M LED Off, 100M LED On):
- Ensure the connected Ethernet device supports Gigabit speeds.
- Check the Ethernet cable for quality; a damaged or low-quality cable can limit speed.
7. Тэхнічныя характарыстыкі
Detailed technical specifications for the SODOLA Gigabit Ethernet Media Converter:
Image 7.1: Product dimensions and a summary of key specifications.
| Асаблівасць | Спецыфікацыя |
|---|---|
| Нумар мадэлі | SL-SG0101-SFPK2 |
| Валаконна-партовы | SFP (1.25G, SingleMode, 1310-nm, Dual LC) |
| Валаконна адлегласць | Да 20 км |
| UTP Port | RJ-45 10/100/1000Mbps (Auto-negotiation, MDI/MDI-X) |
| UTP/STP Cable | Cat.5e or Cat.6, up to 100m |
| Хуткасць перадачы даных | 1000 Megabits Per Second (2000Mbps Full-Duplex) |
| Пратакол перадачы дадзеных | IEEE 802.3 |
| Электразабеспячэнне | DC 5V-1A (5.5*2.5mm) |
| Вага прадмета | 10.5 унцыі (0.3 кілаграма) |
| Памеры ўпакоўкі | 6.42 х 4.72 х 1.85 цалі |
| Працоўная тэмпература | 0 ~ 60 °C |
8. Гарантыя і падтрымка
The included SFP SingleMode transceiver comes with a one-year replacement warranty for any quality issues. For further assistance, technical support, or warranty claims, please contact Sodola customer service through the retailer where the product was purchased or visit the official Sodola webсайт для кантактнай інфармацыі.