Yaheetech Metal Bed Frame 90 x 190 cm

1. Уводзіны

Thank you for choosing the Yaheetech Metal Bed Frame. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new bed frame. Please read these instructions carefully before beginning assembly and retain them for future reference.

Figure 1: Yaheetech Metal Bed Frame (90 x 190 cm, Black)

2. Інфармацыя па бяспецы

• Заўсёды збірайце каркас ложка на мяккай, чыстай паверхні, каб пазбегнуць пашкоджання вырабу або падлогі.
• Перад зборкай пераканайцеся, што ўсе дэталі ў наяўнасці і не пашкоджаныя. Не працягвайце зборку, калі якія-небудзь дэталі адсутнічаюць або пашкоджаныя.
• Tighten all screws and bolts securely, but do not overtighten to avoid stripping threads.
• Regularly check all fasteners to ensure they remain tight. Loose fasteners can compromise stability.
• Не дазваляйце дзецям залазіць на каркас ложка падчас зборкі або выкарыстання.
• The maximum weight capacity for this bed frame is 180 kg (397 lbs). Do not exceed this limit.
• Use only the recommended mattress size (90 x 190 cm) to ensure proper fit and safety.

3. Змесціва ўпакоўкі

Please verify that all components listed below are included in your package. If any parts are missing, please contact customer support.

• Headboard and Footboard sections
• Бакавыя рэйкі
• Металічныя ламелі (12 штук)
• Апорныя ножкі (6 штукі)
• Assembly Hardware (screws, bolts, L-shaped plates, Allen key)

Малюнак 2: Разарваны view and dimensions of the bed frame components.

4. Інструкцыі па ўсталёўцы і зборцы

Follow these steps carefully to assemble your Yaheetech Metal Bed Frame.

1. Распакаваць і вызначыць дэталі: Lay out all components on a clean, soft surface. Refer to the parts list to ensure everything is present.
2. Прымацуйце бакавыя парэнчы да ўзгалоўя і падножжа ложка: Connect the side rails to the headboard and footboard using the provided bolts and L-shaped plates. Ensure all connections are secure.
3. Усталюйце апорныя ножкі: Attach the central support legs to the designated points on the side rails or central beam.
4. Insert Metal Slats: Carefully place each metal slat into the designated notches on the side rails. Ensure each slat is fully seated and secured. Some slats may require a firm press to click into place.
   

   Figure 3: Aligning and securing metal slats.

5. Бяспечныя злучэнні: Use the provided Allen key to tighten all bolts and screws. Ensure all L-shaped plates are firmly fastened for maximum stability.
   

   Figure 4: Fastening L-shaped plates for structural stability.
6. Канчатковая праверка: Once assembled, gently shake the frame to ensure it is stable and all connections are tight.

5. Інструкцыя па эксплуатацыі

5.1 Размяшчэнне матраца

Place your 90 x 190 cm mattress directly onto the assembled metal slats. The design of the bed frame, including the slightly recessed slats, helps to prevent the mattress from sliding.

Figure 5: Built-in slats prevent mattress from sliding.

5.2 Месца для захоўвання рэчаў пад ложкам

The bed frame offers approximately 32 cm (12.6 inches) of clearance underneath, providing ample space for storage boxes, luggage, or other items. This maximizes storage efficiency in your bedroom.

Figure 6: Under-bed storage space.

6. Тэхнічнае абслугоўванне

• Уборка: Працярыце металічную раму мяккай губкайamp тканінай. Пазбягайце абразіўных ачышчальнікаў або агрэсіўных хімічных рэчываў, якія могуць пашкодзіць пакрыццё.
• Праверка крапяжу: Periodically (e.g., every 3-6 months) check all bolts and screws and retighten if necessary to maintain stability and prevent squeaking.
• Абарона падлогі: The bed frame is equipped with bottom rubber caps to protect your floor from scratches. Ensure these caps remain in place.
  

  Figure 7: Features including under-bed storage and headboard design.

7. Выпраўленне непаладак

• Пісклівыя гукі: Squeaking often indicates loose connections. Re-tighten all bolts and screws. Ensure all slats are properly seated.
• Слізгаценне матраца: If the mattress slides, ensure it is correctly positioned within the frame's recessed area. Check that all slats are securely in place.
• Нестабільнасць: If the bed frame feels unstable, verify that all components are correctly assembled and all fasteners are fully tightened.

8. Тэхнічныя характарыстыкі

Figure 8: Visual representation of product specifications.

9. Гарантыя і падтрымка

For information regarding warranty coverage or to obtain customer support, please refer to the purchase documentation or contact Yaheetech directly through their official website or the retailer where the product was purchased. Please have your model number (YA-00128897) and purchase date available when contacting support.