TAXNELE THC15A Digital LCD Electronic Relay Timer User Manual

1. Уводзіны

The TAXNELE THC15A is a digital electronic relay timer designed for general-purpose time control applications. This device allows for precise, programmable switching of various electrical appliances and devices based on daily and weekly schedules. It features a clear LCD display and user-friendly buttons for easy operation.

Асноўныя характарыстыкі:

• 7-day digital programmable timer with daily and weekly programs.
• Дыяпазон часу ад 1 хвіліны да 168 гадзін.
• Up to 20 ON and 20 OFF settings for repeat programs.
• Automatic control for various powered devices.
• High-precision industrial-grade chip for accurate timing.
• Large screen and clear key buttons for easy and accurate operation.

2. Інструкцыі па тэхніцы бяспекі

Please read these safety instructions carefully before installation and operation to prevent damage to the device or injury to yourself.

• Электрычная небяспека: Installation and wiring should only be performed by qualified personnel. Ensure power is disconnected before any wiring work.
• тtage Сумяшчальнасць: Пераканайцеся, што гучнасць таймераtage rating (12V DC AC) matches your power supply. Connecting to an incorrect voltage можа пашкодзіць прыладу.
• Грузападымальнасць: Do not exceed the maximum load current specified for the timer's relay. Overloading can cause overheating and fire hazards.
• Асяроддзе: Do not install the timer in areas with high humidity, extreme temperatures, or corrosive gases.
• Тэхнічнае абслугоўванне: Do not attempt to disassemble or repair the timer yourself. Refer to qualified service personnel.

3. Кампаненты прадукту і дысплей

The THC15A timer features a clear LCD display and intuitive buttons for programming and control. Below is an overview of its main components and display elements.

This image shows the front panel of the THC15A timer, highlighting the LCD screen, working indicator, and control buttons labeled for Hour, Day, ON/AUTO/OFF, Timer, Clock, and Reset functions.

Элементы кіравання на пярэдняй панэлі:

• ВК-экран: Displays current time, day, and programming status.
• Працоўны індыкатар: LED light indicating the timer's operational status.
• D+ (Day): Button for setting the day of the week.
• H+ (Hour): Button for setting the hour.
• M+ (Minute): Button for setting the minute.
• Кнопка гадзінніка: Used to exit programming mode and return to clock display, or to set the current time.
• Кнопка таймера: Used to enter and navigate programming modes for ON/OFF settings.
• Кнопка скіду: Скідае ўсе налады да заводскіх значэнняў.
• Manual Button (ON/AUTO/OFF): Toggles between manual ON, automatic operation, and manual OFF modes.

This image shows a 30A relay, which is integrated into the timer to handle significant electrical loads safely and stably.

4. Тэхнічныя характарыстыкі

This image illustrates the physical dimensions of the THC15A timer, including its height (87mm), width (36mm), and depth (65mm), along with its DIN rail mounting compatibility.

5. Мантаж і праводка

The THC15A timer is designed for easy installation on a 35mm DIN rail. Follow these steps for proper mounting and wiring.

5.1 Мантаж на DIN-рэйку

The timer can be easily snapped onto a standard 35mm DIN rail, commonly found in electrical distribution boxes or control panels.

This image demonstrates the compact size of the THC15A timer when assembled on a 35mm DIN rail, ideal for household electrical panels.

5.2 Інструкцыі па падключэнні

WARNING: Ensure all power is disconnected before attempting any wiring. Incorrect wiring can cause electric shock or damage to the device.

The timer has terminals for power input and load output. Refer to the diagram below for typical wiring connections.

This diagram illustrates a basic wiring setup for the THC15A timer, connecting it to a power source (terminals 1 and 2) and a load (terminals 3, 4, 5 for the relay switch). The red lines indicate live/hot connections, and green lines indicate neutral/return connections.

• Тэрміналы 1 і 2: Power input for the timer (12V DC AC).
• Terminals 3, 4, 5: Relay output contacts.
• Тэрмінал 3: Normally Open (NO) contact.
• Тэрмінал 4: Common (COM) contact.
• Тэрмінал 5: Normally Closed (NC) contact.
• Connect your load to the Common (4) and either Normally Open (3) or Normally Closed (5) contact, depending on whether you want the load to be ON or OFF when the timer is activated.

6. Інструкцыя па эксплуатацыі

The THC15A timer offers precise timing and multiple programming options. Follow these steps to set up and operate your timer.

This image highlights the timer's capability for precise timing and automatic calibration, ensuring accurate operation.

6.1 Initial Setup: Setting Current Time and Day

1. Уключэнне: Connect the timer to power. The LCD will light up.
2. Скінуць: Націсніце R (Reset) button with a pointed object (e.g., a pen tip) to clear all previous settings and reset the timer. The display will show 00:00.
3. Дзень усталёўкі: Націсніце і ўтрымлівайце Гадзіннік кнопку, затым націсніце D+ button repeatedly until the correct day of the week is displayed (e.g., MO for Monday, TU for Tuesday).
4. Задаць гадзіну: Яшчэ трымаючы Гадзіннік кнопку, націсніце H+ button repeatedly to set the correct hour.
5. Устанавіць хвіліну: Яшчэ трымаючы Гадзіннік кнопку, націсніце M+ некалькі разоў націсніце кнопку, каб усталяваць патрэбную хвіліну.
6. Адпусціце Гадзіннік кнопка. Цяпер бягучы час і дзень усталяваны.

6.2 Праграмаванне цыклаў УКЛ./ВЫКЛ.

The timer supports up to 20 ON and 20 OFF programs. Each program can be set for specific days or a combination of days.

This image highlights the multi-functional capabilities of the timer, including various programming options like 20 ON/OFF settings, countdown, cycle, and day/week cycles.

1. Націсніце Таймер button once. The display will show "1 ON". This is your first ON program setting.
2. Прэса D+ to select the day(s) for this ON program. Options include individual days, weekdays, weekends, or all 7 days.
3. Прэса H+ to set the hour for the ON time.
4. Прэса M+ to set the minute for the ON time.
5. Націсніце Таймер button again. The display will show "1 OFF". This is your first OFF program setting.
6. Паўтарыце крокі 2-4, каб усталяваць дзень(ы), гадзіну і хвіліну для часу выключэння.
7. Працягвайце націскаць на Таймер button to cycle through "2 ON", "2 OFF", up to "20 ON", "20 OFF" to set additional programs.
8. Пасля налады ўсіх патрэбных праграм націсніце кнопку Гадзіннік кнопку, каб выйсці з рэжыму праграмавання і вярнуцца да адлюстравання бягучага часу.

6.3 Ручное кіраванне (УКЛ./АЎТА/ВЫКЛ.)

The Дапаможнік button allows you to override the programmed settings temporarily or permanently.

• Націсніце Дапаможнік некалькі разоў націсніце кнопку, каб пераключацца паміж наступнымі рэжымамі:
• ВКЛ: The load is continuously ON, ignoring all programs.
• АЎТА: The timer operates according to the programmed ON/OFF cycles.
• OFF: The load is continuously OFF, ignoring all programs.
• For automatic operation, ensure the timer is set to АЎТА рэжым.

7. Тэхнічнае абслугоўванне

The THC15A timer requires minimal maintenance to ensure long-term reliable operation.

• Уборка: Use a soft, dry cloth to wipe the timer's surface. Do not use abrasive cleaners or solvents, as they may damage the plastic casing or LCD.
• Асяроддзе: Ensure the installation environment remains free from excessive dust, moisture, and extreme temperatures.
• агляд: Periodically check wiring connections to ensure they are secure and free from corrosion.

8. Выпраўленне непаладак

If you encounter issues with your THC15A timer, refer to the following common problems and solutions.

9. Гарантыя і падтрымка

This TAXNELE THC15A Digital LCD Electronic Relay Timer is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.