Уводзіны
The COMPUTHERM E280 Wi-Fi Thermostat allows you to control connected heating or cooling devices, such as boilers or air conditioning systems, via your smartphone or tablet over the internet. This thermostat is compatible with any two-wire thermostatic connector and supports both 24V and 230V control circuits. It is particularly useful for managing heating/cooling in homes, apartments, or holiday residences, especially when occupancy schedules are irregular.
Equipped with a connectable floor temperature sensor, the E280 is ideal for controlling underfloor heating systems. It features two potential-free relays that can operate simultaneously, allowing independent control of two devices. This enables the thermostat to manage a pump and a zone valve in addition to the main boiler, facilitating multi-zone heating systems without requiring a separate zone control system.
Image: The Computherm E280 Wi-Fi Thermostat displaying room temperature and set temperature, alongside a smartphone showing the thermostat's control application.
Змест пакета
Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе кампаненты наяўныя і не пашкоджаныя.
- Computherm E280 Wi-Fi Thermostat unit
- Датчык тэмпературы падлогі
- Мантажныя шрубы і дюбелі
- Кіраўніцтва карыстальніка (гэты дакумент)
Image: The Computherm E280 thermostat, its floor sensor, mounting hardware, and printed user manuals as found in the product packaging.
Настройка і ўстаноўка
Важна: Installation should only be performed by a qualified electrician or heating engineer. Ensure the main power supply is disconnected before commencing any wiring.
1. Устаноўка тэрмастата
- Choose a suitable location on an interior wall, away from direct sunlight, drafts, or heat sources, at approximately 1.5 meters (5 feet) from the floor.
- Carefully separate the front panel from the backplate of the thermostat.
- Mark the drilling points on the wall using the backplate as a template.
- Drill holes, insert wall plugs, and secure the backplate to the wall using the provided screws.
2. Падключэнне правадоў
The Computherm E280 features two potential-free relays (K1 and K2) for controlling heating/cooling systems and an optional floor sensor.
Выява: Задняя частка view of the Computherm E280 thermostat, detailing the terminal block for electrical connections, including power input, relay outputs (K1 and K2), and the floor sensor input.
- Блок харчавання (L, N): Connect the live (L) and neutral (N) wires of your 230V AC power supply.
- Relay K1 (COM, NO, NC): This relay is typically used for controlling the main heating/cooling device (e.g., boiler).
- COM: Common terminal.
- НЕ: Normally Open (connect to this for heating applications where the circuit closes to activate).
- NC: Normally Closed (connect to this for cooling applications where the circuit opens to activate).
- Relay K2 (COM, NO): This relay can be used for an auxiliary device, such as a pump or zone valve.
- COM: Common terminal.
- НЕ: Звычайна адкрыты.
- Датчык падлогі: Connect the wires from the external floor temperature sensor to the designated terminals.
3. Канчатковая зборка
- Once wiring is complete and secure, carefully reattach the front panel of the thermostat to the backplate.
- Restore power to the system. The thermostat display should illuminate.
Інструкцыя па эксплуатацыі
The Computherm E280 can be operated directly via its touch buttons or remotely via the dedicated smartphone application.
1. Initial Power-On and Wi-Fi Connection
- After power-on, the thermostat will display the current room temperature and default settings.
- Download the "Computherm" or "Smart Life" app from your smartphone's app store (iOS or Android).
- Follow the in-app instructions to add a new device and connect your E280 thermostat to your 2.4 GHz Wi-Fi network. This typically involves putting the thermostat into pairing mode (refer to the app or thermostat's quick start guide for specific button presses).
2. Basic Thermostat Functions (On-Device)
Выява: Падрабязны view of the Computherm E280 thermostat's digital display, showing current room temperature, set temperature, day, and time, along with the touch-sensitive control buttons below the screen.
- Кнопка харчавання (⏻): Press to turn the thermostat on or off.
- Кнопка рэжыму (↻): Cycle through operating modes (e.g., Heating, Cooling, Auto, Manual).
- Set Button (⏱): Access settings or programming menus.
- Up/Down Arrows (▲ / ▼): Adjust temperature setpoints or navigate menu options.
3. Remote Control via Smartphone App
The smartphone app provides comprehensive control and monitoring capabilities:
Image: A smartphone screen displaying the advanced settings interface of the Computherm E280 thermostat app, showing options like sensor mode, temperature differentials, and antifreeze settings.
- Рэгуляванне тэмпературы: Easily change the set temperature from anywhere.
- Планаванне: Create and modify weekly heating/cooling schedules.
- Выбар рэжыму: Switch between heating, cooling, and manual modes.
- Дадатковыя налады: Configure parameters such as temperature calibration, switching sensitivity, floor sensor limits, and antifreeze protection.
- Маніторынг: View current room and floor temperatures, operating status, and historical data.
Тэхнічнае абслугоўванне
The Computherm E280 thermostat requires minimal maintenance to ensure optimal performance.
- Уборка: Працярыце дысплей тэрмастата іasinПрацірайце мяккай сухой тканінай. Пазбягайце выкарыстання абразіўных ачышчальнікаў, растваральнікаў або хімічных спрэяў, бо яны могуць пашкодзіць паверхню або ўнутраныя кампаненты.
- Праверка датчыка: Periodically ensure that the internal and external (floor) temperature sensors are free from obstructions or debris that could affect accurate readings.
- Абнаўленні праграмнага забеспячэння: Keep the smartphone application updated to the latest version to benefit from new features and performance improvements. The thermostat's firmware may also receive updates via the app.
Ліквідацыю непаладак
If you encounter issues with your Computherm E280 thermostat, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Дысплей тэрмастата пусты. | Няма крыніцы харчавання. | Check circuit breaker and wiring connections. Ensure power is restored. |
| Немагчыма падключыцца да Wi-Fi. | Incorrect Wi-Fi password, 5GHz network, or weak signal. | Verify Wi-Fi password. Ensure you are connecting to a 2.4 GHz network. Move thermostat closer to router or use a Wi-Fi extender. Restart thermostat and router. |
| Сістэма ацяплення/астуджэння не рэагуе. | Incorrect wiring, system turned off, or thermostat in wrong mode. | Check wiring connections (refer to Setup section). Ensure heating/cooling system is powered on. Verify thermostat is in the correct operating mode (e.g., Heating). |
| Няправільныя паказчыкі тэмпературы. | Sensor obstruction, thermostat location, or calibration issue. | Ensure sensors are clear. Relocate thermostat if exposed to drafts/direct sunlight. Check app for temperature calibration options. |
If the problem persists, please contact Computherm customer support.
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | КАМП'ЮТЭРМ |
| Нумар мадэлі | E280 |
| Колер | Белы |
| Матэрыял | Пластыкавыя |
| Памеры прадукту (Д х Ш х У) | 1.7 х 8.6 х 8.6 см |
| Вага прадмета | 370 грамаў |
| тtage | 240 Volts AC (max. 24V DC / 240V AC for relays) |
| Крыніца харчавання | Правадная электрычная |
| Тэхналогія падлучэння | Wi-Fi (b/g/n) 2.4 ГГц |
| Temperature Measurement Range (Internal) | 0 °C - 50 °C (0.1 °C increments) |
| Temperature Measurement Range (Floor Sensor) | 0 °C - 99 °C (0.1 °C increments) |
| Дакладнасць вымярэння тэмпературы | ± 0.5 °C |
| Рэгуляваны дыяпазон тэмператур | 5 °C - 99 °C (0.5 °C increments) |
| Пераключэнне адчувальнасці | ± 0.1 °C to ± 1.0 °C (0.1 °C increments) |
| Switchable Current (K1) | 8A (2A inductive load) |
| Switchable Current (K2) | 3A (1A inductive load) |
| Heat Sensor Type (Internal & Floor) | NTC 3950K 10kΩ at 25°C |
| Асаблівасці | Programmable, Wi-Fi Control, Floor Sensor Included |
| Канкрэтнае выкарыстанне | Radiator, Underfloor Heating |
Гарантыя і падтрымка
The Computherm E280 Wi-Fi Thermostat comes with a Гарантыя 2 год з даты пакупкі. Гэтая гарантыя распаўсюджваецца на вытворчыя дэфекты і няспраўнасці пры нармальным выкарыстанні. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.
For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or visit the official Computherm webсайт для кантактнай інфармацыі.