Barska Pursuit-200 (BE12748)

Кіраўніцтва карыстальніка палявога камплекта металадэтэктара Barska Winbest Pursuit-200

Model: Pursuit-200 (BE12748)

Марка: Барска

1. Уводзіны

This manual provides detailed instructions for the assembly, operation, and maintenance of your Barska Winbest Pursuit-200 Metal Detector Field Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.

The Pursuit-200 Metal Detector Field Kit is designed for detecting various metals and includes a main metal detector with an LCD display, a handheld wand detector, headphones, a folding shovel, and a soft carrying case.

2. Змесціва ўпакоўкі

Праверце, ці ёсць у вашай упакоўцы ўсе пералічаныя ніжэй прадметы:

  • Barska Winbest Pursuit-200 Metal Detector (Main Unit)
  • Surveyor-100 Handheld Wand Metal Detector
  • Навушнікі
  • Folding Shovel with Compass
  • Мяккі футляр для пераноскі
  • Кіраўніцтва карыстальніка (гэты дакумент)
Barska Winbest Pursuit-200 Metal Detector Field Kit components

Малюнак 2.1: All components of the Barska Winbest Pursuit-200 Metal Detector Field Kit, including the main detector, wand detector, headphones, shovel, and carrying case.

3. Настройка

3.1. Assembling the Main Metal Detector

  1. Прымацуйце пошукавую шпульку: Secure the search coil to the lower stem using the provided bolt and nut. Ensure it is firmly attached but allows for slight angle adjustment.
  2. Connect the Lower and Middle Stems: Insert the lower stem into the middle stem and secure it with the spring clip or locking mechanism.
  3. Attach the Control Housing: Slide the control housing onto the upper stem. Adjust the armrest for comfort and secure the control housing in place.
  4. Абгарніце кабель: Carefully wrap the search coil cable around the stem, ensuring it is not too tight or loose, and plug the connector into the control housing.
  5. Усталюйце батарэі: Open the battery compartment on the control housing and insert the required batteries (refer to specifications for battery type).
Assembled Barska Winbest Pursuit-200 Metal Detector

Малюнак 3.1: The main metal detector fully assembled, showing the search coil, stem, armrest, and control housing.

3.2. Preparing the Wand Detector

The Surveyor-100 Wand Metal Detector typically requires battery installation. Open the battery compartment, insert the correct batteries, and close the compartment securely.

Barska Surveyor-100 Handheld Wand Metal Detector

Малюнак 3.2: The handheld wand metal detector, showing its compact design and control buttons.

3.3. Preparing the Folding Shovel

Unfold the shovel and secure its locking mechanisms to ensure it is rigid for use. The shovel can be configured as a shovel or a pick. The compass is integrated into the handle.

Barska Folding Shovel in various configurations

Малюнак 3.3: The multi-use folding shovel, shown in both shovel and pick configurations.

4. Інструкцыя па эксплуатацыі

4.1. Main Metal Detector Operation

Barska Pursuit-200 Metal Detector LCD control panel

Малюнак 4.1: Close-up of the Pursuit-200 metal detector's LCD display and control panel, showing buttons for DISC, NOTCH, SENS, and volume knob.

  1. Уключэнне: Turn the VOLUME knob clockwise to power on the detector.
  2. Adjust Sensitivity (SENS): Press the SENS button and use the '+' and '-' buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
  3. Discrimination (DISC): Press the DISC button and use '+' and '-' to set the discrimination level. This feature allows the detector to ignore certain types of metal (e.g., iron). The LCD will show the target ID.
  4. Насечка: Use the NOTCH function to selectively eliminate specific metal categories from detection.
  5. Навушнікі: Plug the included headphones into the 'PHONE' jack for private listening and clearer audio signals.
  6. Падмятанне: Hold the detector with the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping arcs.
  7. Target Indication: When a metal object is detected, the detector will emit an audible tone, and the LCD display will show a target ID and signal strength.
  8. Воданепранікальная пошукавая шпулька: The 10-inch search coil is weather-sealed and can be submerged in shallow water for detection. Ensure the control housing is not submerged.

4.2. Wand Detector Operation

Hand holding Barska Surveyor-100 Wand Metal Detector

Малюнак 4.2: A hand holding the Surveyor-100 wand detector, demonstrating its ergonomic design for pinpointing targets.

  1. Уключэнне: Press the Power ON/OFF button to activate the wand detector.
  2. Дакладнае вызначэнне: After locating a general area with the main detector, use the wand detector to precisely pinpoint the target's location in the soil.
  3. Паказанне: The wand detector will typically use audible alerts and/or vibration, along with LED indicators, to signal the presence of metal.

4.3. Shovel Usage

Use the folding shovel to excavate detected targets. Its compact design and pick function are useful for breaking up tough ground. The integrated compass can assist with navigation.

5. Тэхнічнае абслугоўванне

  • Уборка: Wipe down the detector and accessories with a damp тканінай пасля кожнага выкарыстання. Пазбягайце абразіўных ачышчальнікаў.
  • захоўванне: Store the kit in the provided soft carrying case in a dry, cool place when not in use.
  • Сыход за батарэяй: Remove batteries from both detectors if they will not be used for an extended period to prevent leakage.
  • Праверка кабеля: Regularly check the search coil cable for any signs of wear or damage.

6. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
No power to main detector/wand detectorРазраджаныя або няправільна ўсталяваныя батарэіЗамяніце батарэйкі на новыя, сачыце за правільнай палярнасцю.
Erratic signals or false positivesHigh sensitivity, electromagnetic interference, mineralized groundReduce sensitivity. Move away from power lines or other electronic devices. Use discrimination settings.
Дэтэктар не знаходзіць металLow sensitivity, incorrect discrimination settings, search coil not parallel to groundIncrease sensitivity. Adjust discrimination settings. Ensure search coil is swept correctly.
З навушнікаў няма гукуHeadphones not plugged in correctly, volume too low, faulty headphonesEnsure headphones are fully plugged in. Increase volume. Test with another pair of headphones if available.

7. Тэхнічныя характарыстыкі

  • мадэль: Pursuit-200 (BE12748)
  • Марка: Барская
  • Search Coil Size: 10 цаляў (воданепранікальны)
  • Дысплей: ВК
  • Крыніца харчавання: Battery Powered (Batteries Required: Yes)
  • Рэгуляваная даўжыня: Yes, up to 47 inches
  • матэрыял: Метал
  • Вага прадмета: Прыблізна 0.4 кілаграма (14.1 унцыі)
  • Памеры прадукту: 10 см Д х 9.5 см Ш х 48.42 см В (у сабраным выглядзе)
  • Міжнародны рэйтынг абароны: IP541 (for search coil)
  • Аксэсуары ў камплекце: Surveyor-100 Wand Detector, Headphones, Folding Shovel with Compass, Soft Carrying Case

8. Інфармацыя па бяспецы

  • Always obtain permission before searching on private property.
  • Be aware of local regulations regarding metal detecting.
  • Exercise caution when digging to avoid damaging underground utilities or historical artifacts.
  • Do not use the metal detector near live electrical wires or in hazardous environments.
  • Трымайце батарэйкі далей ад дзяцей і ўтылізуйце іх належным чынам.

9. Гарантыя і падтрымка

For warranty information and customer support, please refer to the official Barska webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Barska Official Webсайт: www.barska.com