1. Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of your BAIZIFU 36V/48V Waterproof Brushless Motor Speed Controller. This controller is designed for electric bicycles and scooters, supporting motors with power ratings from 150W to 300W. Please read this manual thoroughly before use to ensure proper function and safety.
2. Тэхніка бяспекі
- Заўсёды адключайце харчаванне перад любой устаноўкай, тэхнічным абслугоўваннем або ліквідацыяй няспраўнасцей.
- Ensure all connections are secure and correctly wired to prevent short circuits or damage.
- Пераканайцеся, што ўвод voltage (36V/48V) matches your battery system.
- Avoid exposing the controller to extreme temperatures or direct impact.
- Although waterproof, avoid submerging the controller in water for extended periods.
- Калі вы не ўпэўненыя ў якім-небудзь кроку, звярніцеся да кваліфікаванага спецыяліста.
3. Прадукт скончыўсяview
3.1 Асаблівасці
- 36V/48V Rated Voltage
- 150-300 Watts Rated Power
- Designed for electric bicycles and scooters, including mechanical or electric forklifts.
- Brushless Controller technology for efficient operation.
- Воданепранікальная канструкцыя для падвышанай трываласці.
3.2 Тэхнічныя характарыстыкі
| Атрыбут | Каштоўнасць |
|---|---|
| Марка | BAIZIFU |
| тtage | 36В / 48В |
| Намінальная магутнасць | 150 Вт - 300 Вт |
| Матэрыял | Алюміній |
| Вага прадмета | 8 унцыі (0.5 фунта) |
| Памеры ўпакоўкі | 3 х 3 х 2.1 цалі |
| Гарантыя | 1 год |
3.3 Кампаненты прадукту
4. Кіраўніцтва па ўстаноўцы
Follow these steps to correctly install your brushless motor controller. Refer to the wiring diagram for visual guidance.
- Connect Motor Wire: Connect the motor wire from the controller to your motor. Ensure the connectors are firmly seated.
- Падключыце кабель сілкавання: Connect the power cable from the controller to your battery. Observe correct polarity (red to positive, black to negative).
- Connect Speed Control Line: Attach the speed control line to your throttle switch or handle.
- Connect Switch Wire: Connect the switch wire to your on-off switch.
- Бяспечныя злучэнні: Двойчы праверце ўсе злучэнні на герметычнасць і правільнасць размяшчэння.
- Кантролер мантавання: Securely mount the controller in a suitable location on your electric bicycle or scooter, ensuring it is protected from physical damage and excessive heat.
4.1 Відэа ўстаноўкі
Video: This video demonstrates the process of connecting the brushless motor and controller to a power source, illustrating the wiring steps for a functional setup.
5. Інструкцыя па эксплуатацыі
Once the controller is correctly installed, follow these steps to operate your electric vehicle:
- Уключэнне: Turn on the main power switch connected to the controller.
- Кіраванне дросельнай засланкай: Use the throttle handle or switch to control the motor speed. Gradually increase the throttle for smooth acceleration.
- Манітор прадукцыйнасці: Pay attention to the motor's response and any unusual sounds during operation.
- Выключэнне: When finished, turn off the main power switch to disconnect power to the controller and motor.
6. Тэхнічнае абслугоўванне і догляд
- Рэгулярны агляд: Periodically check all wiring connections for any signs of wear, corrosion, or looseness.
- Уборка: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Avoid using harsh chemicals.
- Ахова навакольнага асяроддзя: While waterproof, protect the controller from prolonged exposure to heavy rain or direct water jets.
- захоўванне: If storing the vehicle for an extended period, ensure the controller is disconnected from the battery.
7. Кіраўніцтва па ліквідацыі непаладак
If you encounter issues with your motor controller, refer to the table below for common problems and solutions.
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Матор не запускаецца | No power, loose connections, faulty switch. | Check battery charge, verify all wiring connections, test the on-off switch. |
| Матор працуе з перапынкамі | Loose wiring, intermittent power supply, throttle issue. | Inspect all connections, check battery output, test throttle functionality. |
| Motor runs but no speed control | Faulty throttle, speed control line disconnected. | Check speed control line connection, test or replace throttle. |
| Controller gets excessively hot | Overload, poor ventilation, short circuit. | Reduce load, ensure proper airflow around controller, check for short circuits in wiring. |
Калі праблема не знікне пасля спробы гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў.
8. Гарантыя і падтрымка
8.1 Інфармацыя аб гарантыі
This BAIZIFU Brushless Motor Controller comes with a Гарантыя 1 год from the date of purchase. The warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or normal wear and tear.
To claim warranty service, please retain your proof of purchase and contact our customer support team.
8.2 Падтрымка кліентаў
For technical assistance, troubleshooting, or warranty inquiries, please contact BAIZIFU customer support through the retailer's platform or the official brand website. Please have your product model number (B0CJ3DPVC6) and purchase details ready when contacting support.