ROBOTIME TG507, TGL01

ROBOTIME 3D Wooden Puzzle DIY Model Building Kit

Big Ben (TG507) & Eiffel Tower (TGL01) Instruction Manual

1. Уводзіны

Welcome to the world of ROBOTIME 3D Wooden Puzzles! This instruction manual provides essential information for assembling, operating, and maintaining your Big Ben (TG507) and Eiffel Tower (TGL01) DIY model building kits. These kits offer a fun and engaging experience, culminating in beautiful, illuminated architectural replicas.

The Big Ben model is a replica of the famous British landmark, while the Eiffel Tower model represents the iconic French structure. Both models feature integrated LED lighting to enhance their display.

ROBOTIME Big Ben and Eiffel Tower 3D wooden puzzles side by side, both illuminated with warm LED lights.

Image 1.1: The assembled ROBOTIME Big Ben and Eiffel Tower 3D wooden puzzles, showcasing their intricate details and warm LED illumination.

2. Што ў скрынцы

Upon opening your ROBOTIME 3D Wooden Puzzle kit, you will find the following components:

  • 3D Wooden Puzzle Pieces: Precisely cut wooden sheets containing all the parts required for assembly.
  • Святлодыёдныя ліхтары: Integrated lighting components to illuminate your finished model.
  • Кіраўніцтва па эксплуатацыі: A detailed, step-by-step guide specific to your model (Big Ben or Eiffel Tower).
  • Sanding Paper: For smoothing edges if necessary.
  • Small Tools (Optional): Some kits may include a small tool for easier assembly.

Note: A Type-C cable for the Eiffel Tower's LED lights is not included and must be arranged separately.

3. Налада і зборка

Assembling your ROBOTIME 3D wooden puzzle is a rewarding process. Please follow the specific instructions provided in the manual included with your kit for the best results. The general steps are outlined below:

3.1 Падрыхтоўка

  1. Распакуйце кампаненты: Carefully remove all wooden sheets and other components from the packaging.
  2. Вызначыць часткі: Familiarize yourself with the different wooden sheets and the parts labeled on them. Refer to the parts diagram in your kit's manual.
  3. Падрыхтуйце працоўнае месца: Ensure you have a clean, well-lit, and spacious area to work on.

3.2 Працэс зборкі

  1. Punch Out Pieces: Gently press out the individual wooden pieces from their sheets. If a piece is difficult to remove, use a craft knife or the provided tool to carefully cut the connecting points.
  2. Гладкія краю: Use the included sanding paper to smooth any rough edges on the pieces for a better fit and finish.
  3. Выконвайце пранумараваныя крокі: The included instruction manual provides a numbered, pictorial guide. Assemble the pieces in the exact order specified.
  4. Interlock Pieces: Most pieces interlock without glue. Apply gentle, even pressure to fit them together. If a connection is particularly tight, ensure alignment before applying force.
  5. Integrate LED Lights: As you progress, the manual will guide you on where and how to install the LED light components. Ensure wires are routed correctly and connections are secure.
  6. Complete Sections: Build the model section by section, ensuring each part is firmly in place before moving to the next.
Assembled Big Ben 3D wooden puzzle with LED lights, displayed on a wooden desk with books and a small bust.

Image 3.1: The Big Ben model, fully assembled and illuminated, serving as a decorative piece.

Буйны план views of the Big Ben 3D wooden puzzle, showing intricate details of the clock face, windows, and architectural elements.

Малюнак 3.2: Падрабязны views of the Big Ben model, highlighting the craftsmanship.

Буйны план views of the Eiffel Tower 3D wooden puzzle, showing the viewing platform, 'Paris' inscription, and the Type-C power port.

Image 3.3: Detailed features of the Eiffel Tower model, including its power input.

4. Operating the LED Lights

Once your model is fully assembled and the LED lights are integrated, you can illuminate your creation.

  • Крыніца харчавання: The LED lights are typically powered via a USB connection. For the Eiffel Tower, a Type-C USB cable (not included) is required.
  • падключэнне: Connect the USB cable to the designated port on your model (e.g., the Type-C port on the Eiffel Tower) and plug the other end into a compatible USB power adapter (e.g., phone charger, computer USB port, power bank).
  • Актывацыя: The lights should illuminate automatically once power is supplied. There is typically no separate switch.
Assembled Eiffel Tower 3D wooden puzzle with LED lights, displayed on a wooden table next to an open book.

Image 4.1: The Eiffel Tower model, illuminated and displayed as a decorative item.

5. Тэхнічнае абслугоўванне

To ensure the longevity and appearance of your ROBOTIME 3D wooden puzzle models, follow these simple maintenance guidelines:

  • Уборка: Dust the model regularly with a soft, dry cloth or a soft brush. Avoid using abrasive cleaners or wet cloths, which can damage the wood.
  • Пазбягайце вільгаці: Keep the models away from water, high humidity, and direct exposure to liquids, as wood can warp or swell.
  • Пазбягайце прамых сонечных прамянёў: Prolonged exposure to direct sunlight can cause the wood to fade or crack. Place your models in a location with indirect light.
  • Асцярожна звяртайцеся: While assembled, the models are sturdy, but avoid dropping them or applying excessive force, which could break delicate parts.

6. Выпраўленне непаладак

Калі ў вас узнікнуць якія-небудзь праблемы падчас зборкі або эксплуатацыі, разгледзьце наступныя распаўсюджаныя рашэнні:

  • Кавалкі не падыходзяць:
    • Ensure you are using the correct pieces for the current step. Refer to the instruction manual's diagrams.
    • Check for rough edges and use sanding paper to smooth them.
    • Ensure proper alignment before applying gentle pressure. Do not force pieces.
  • Адсутныя часткі:
    • Double-check all wooden sheets and packaging. Small pieces can sometimes be overlooked.
    • If a piece is genuinely missing, contact ROBOTIME customer support (see Section 8).
  • Святлодыёдныя ліхтары не працуюць:
    • Ensure the USB cable is securely connected to both the model and the power source.
    • Паспрабуйце іншы USB-адаптар харчавання або порт.
    • Verify that the internal wiring connections are intact and not pinched or broken during assembly.
  • Мадэль нестабільная:
    • Review previous assembly steps to ensure all connections are firm and pieces are fully interlocked.
    • Ensure the model is placed on a flat, stable surface.

7. Тэхнічныя характарыстыкі

Key specifications for the ROBOTIME 3D Wooden Puzzle models:

  • Тып прадукту: 3D Wooden Puzzle DIY Model Building Kit
  • Мадэлі ў камплекце: Big Ben (TG507), Eiffel Tower (TGL01)
  • матэрыял: Вуд
  • асвятленне: Integrated LED lights
  • Power Source for LEDs: USB (Type-C for Eiffel Tower, cable not included)
  • Assembly Size (Big Ben): Прыкладна 3.9 х 4.2 х 7.5 цаляў (Д х Ш х У)
  • Assembly Size (Eiffel Tower): Dimensions vary slightly, refer to product packaging for exact measurements.
  • вытворца: ROBOTIME
Product information graphic for the Big Ben model, showing its assembled dimensions: 4 inches length, 4.2 inches width, and 7.5 inches height.

Image 7.1: Dimensions of the assembled Big Ben model.

8. Гарантыя і падтрымка

ROBOTIME is committed to providing high-quality products. While specific warranty details are not provided in this general manual, most products come with a standard manufacturer's warranty against defects in materials and workmanship.

For any questions, concerns, or support needs regarding your ROBOTIME 3D Wooden Puzzle kit, please contact ROBOTIME customer service through their official channels or the retailer where you purchased the product.

You can visit the official ROBOTIME store for more information and contact options: ROBOTIME Official Store

© 2024 ROBOTIME. All rights reserved.