First Alert SMI100-AC Hardwire Interconnect Smoke Alarm

Уводзіны

This manual provides essential information for the installation, operation, and maintenance of your First Alert SMI100-AC Hardwire Interconnect Smoke Alarm with Battery Backup. This device is designed to provide early warning of smoke and fire hazards in residential environments. It features Precision Detection advanced sensing technology and the ability to interconnect with compatible alarms for whole-home coverage.

Важная інфармацыя па бяспецы

• ПАПЯРЭДЖАННЕ: Turn off power at the circuit breaker before installing or servicing the alarm. Failure to do so may result in electrical shock or injury.
• НЕ ФАРБАВАЦЬ: Painting the alarm may interfere with its ability to detect smoke.
• Test the smoke alarm weekly to ensure proper operation.
• Never disconnect the alarm to silence it. Use the Test/Silence button.
• Replace the alarm unit at least every 10 years from the date of manufacture.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• First Alert SMI100-AC Smoke Alarm Unit
• Мантажны кранштэйн
• Quick Connect Plug with wiring harness
• Шчолачная батарэя 9 В
• Мантажныя шрубы і анкеры

Image: Components of the First Alert SMI100-AC smoke alarm, showing the main unit, mounting ring, wiring harness, battery, and screws.

Ўстаноўка

Proper placement and installation are crucial for effective smoke detection.

Рэкамендаванае размяшчэнне

Install smoke alarms on every level of your home, including basements and in every bedroom. For optimal protection, place alarms in hallways outside sleeping areas and in living rooms. Avoid placing alarms in kitchens, bathrooms, or garages where steam, cooking fumes, or exhaust can cause nuisance alarms.

Image: A diagram showing recommended locations for smoke alarms, carbon monoxide alarms, and fire extinguishers throughout a typical house layout, including bedrooms, hallways, living room, kitchen, basement, and garage.

Інструкцыі па праводцы

1. Выключыць харчаванне: Before installation, ensure the power to the circuit where the alarm will be installed is turned off at the main fuse box or circuit breaker.
2. Мантажны кранштэйн: Secure the mounting bracket to the electrical box using the provided screws. Ensure the bracket is firmly attached.
3. Падключэнне правадоў: Connect the Quick Connect Plug wiring harness to your household wiring. Typically, this involves connecting black to black (hot), white to white (neutral), and orange to orange (interconnect, if applicable). Use wire nuts to secure connections.
4. Усталяваць батарэю: Open the battery compartment on the back of the smoke alarm unit. Insert the 9V alkaline battery, ensuring correct polarity (+ to + and - to -). Close the battery compartment.
5. Падключыце сігналізацыю: Plug the Quick Connect Plug into the receptacle on the back of the smoke alarm unit. Align the alarm unit with the mounting bracket and twist clockwise until it locks securely into place.
6. Аднавіць сілу: Turn the power back on at the circuit breaker. The green power indicator light on the alarm should illuminate, indicating it is receiving AC power.
7. Тэст сігналізацыі: Press and hold the Test/Silence button for a few seconds until the alarm sounds. This confirms the unit is functioning correctly.

Image: A close-up of the First Alert SMI100-AC smoke alarm unit, emphasizing the Quick Connect Plug feature for simplified installation.

Аперацыя

Тэставанне сігналізацыі

Test your smoke alarm weekly to ensure it is operating correctly. Press and hold the Test/Silence button on the alarm cover until the alarm sounds. The alarm will emit a loud, pulsating sound. If the alarm does not sound, refer to the Troubleshooting section.

Функцыя цішыні

If a nuisance alarm occurs (e.g., from cooking smoke), you can temporarily silence the alarm by pressing the Test/Silence button. The alarm will remain silent for approximately 10 minutes before resetting. If the smoke is still present after the silence period, the alarm will sound again.

Interconnect Feature

When one interconnected alarm detects smoke, all compatible interconnected alarms in your home will sound. This provides an early warning system throughout your residence.

Светавыя індыкатары

• Зялёны святлодыёд: Indicates AC power is present. It will flash periodically during normal operation.
• Чырвоны святлодыёд: Flashes rapidly during an alarm condition. It will also flash during the test sequence.

Выява: Падрабязны view of the First Alert SMI100-AC smoke alarm's front, highlighting the Test/Silence button and the power indicator light.

Тэхнічнае абслугоўванне

Ачыстка вашай дымавой сігналізацыі

Clean your smoke alarm regularly to prevent dust and debris from interfering with its operation. Use a soft brush attachment on your vacuum cleaner to gently remove dust from the alarm's vents. Do not use cleaning solvents or spray directly onto the alarm.

Замена батарэі

9-вольтавая батарэя забяспечвае рэзервовае харчаванне падчас працыtages. Replace the battery annually, or immediately if the alarm emits a low battery chirp. To replace the battery:

1. Turn off AC power to the alarm at the circuit breaker.
2. Павярніце сігналізацыю супраць гадзіннікавай стрэлкі, каб зняць яе з мантажнага кранштэйна.
3. Адкрыйце батарэйны адсек і выміце старую батарэю.
4. Insert a new 9V alkaline battery, observing polarity.
5. Close the battery compartment and reattach the alarm to the mounting bracket by twisting clockwise.
6. Аднавіце пераменнае сілкаванне і праверце сігналізацыю.

End of Life Replacement

Smoke alarms have a limited lifespan. This First Alert SMI100-AC alarm should be replaced 10 years after its manufacture date. The manufacture date is printed on the back of the alarm unit.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

• мадэль: SMI100-AC
• Крыніца харчавання: 120V AC, 60Hz, with 9V Alkaline Battery Backup
• Тып датчыка: Іянізацыя
• Тып сігналізацыі: Датчык дыму
• Інтэрканэкт: Hardwire interconnect with compatible alarms
• Памеры: 5.6" Г x 5.6" Ш x 1" У
• Вага: Прыкладна 9.6 унцыі
• Працоўная тэмпература: 40°F (4.4°C) да 100°F (37.8°C)
• Працоўная вільготнасць: Адносная вільготнасць (RH) ад 10% да 95% без кандэнсацыі

Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation included with your product or visit the official First Alert webсайт. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для гарантыйных прэтэнзій.

Інтэрнэт-падтрымка: www.firstalert.com