Electro-Harmonix Pico Triboro Bridge Overdrive, Distortion & Fuzz Pedal User Manual

1. Прадукт скончыўсяview

The Electro-Harmonix Pico Triboro Bridge is a versatile multi-mode drive pedal designed to provide a wide range of tonal possibilities. It features three distinct modes: Overdrive, Distortion, and Fuzz, allowing musicians to bridge any gap in their gain requirements. With its powerful EQ capabilities, input contouring, and compact pico-sized footprint, the Triboro Bridge can serve as a foundational element for your tone or offer a fresh alternative to your existing drive pedals.

Асноўныя характарыстыкі:

• Wide range of saturation with Overdrive, Distortion, and Fuzz modes.
• Treble control boosts or cuts high end in Overdrive and Distortion modes.
• Bass control boosts or cuts low end in Overdrive and Distortion modes.
• Fuzz mode features a dedicated Gate control and a Low Pass Filter.
• Includes a power adapter for immediate use.

Выява: Пад вуглом view of the Electro-Harmonix Pico Triboro Bridge pedal, highlighting its compact size and control knobs.

2. Усталёўка і падключэнне

Follow these steps to connect your Pico Triboro Bridge pedal to your audio setup:

1. Падключэнне сілкавання: Connect the included 9V DC power adapter to the power jack on the top of the pedal. Ensure the power supply meets the pedal's specifications (9V DC, center-negative).
2. Уваходнае злучэнне: Connect your instrument (guitar, bass, etc.) to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. Выходнае злучэнне: Падключыце раз'ём OUTPUT з левага боку педалі да вашага ampвыключальнік або наступную педаль у вашым сігнальным ланцугу з дапамогай стандартнага інструментальнага кабеля 1/4 цалі.
4. Уключэнне: Once all connections are secure, plug the power adapter into a wall outlet. The pedal's LED will illuminate when active.

Выява: Задняя частка view of the Pico Triboro Bridge pedal, showing the power input jack for connecting the power adapter.

3. Controls and Operation

The Pico Triboro Bridge features intuitive controls for shaping your desired drive tone. Understanding each knob and button is key to unlocking its full potential.

Ручкі кіравання:

• VOL (аб'ём): Controls the overall output level of the pedal. Adjust this to balance the effect's volume with your bypassed signal or other effects.
• УЗБЕГАЦЬ: Controls the intensity of the drive, distortion, or fuzz effect. Higher settings result in more saturation and sustain.
• BASS / GATE:
  • In Overdrive and Distortion modes, this knob functions as a BASS control, allowing you to boost or cut low frequencies.
  • In Fuzz mode, this knob functions as a БРАМА control, adjusting the noise gate threshold to eliminate unwanted noise and feedback.
• TREBLE / TONE:
  • In Overdrive and Distortion modes, this knob functions as a ТРЭБЛЯ control, allowing you to boost or cut high frequencies.
  • In Fuzz mode, this knob functions as a ТОН control, specifically a Low Pass Filter, for extreme tonal variations and shaping the fuzz character.

TYPE Button:

The small button labeled "TYPE" at the top of the pedal is used to select between the three primary drive modes and to engage the Input Contour Mode.

• Выбар рэжыму: Pressing the TYPE button cycles through the Overdrive (green LED), Distortion (orange LED), and Fuzz (red LED) modes.
• Input Contour Mode: Press and hold the TYPE button to enable or disable the Input Contouring EQ. When active, this mode applies a specific EQ to the input signal for a tighter, more modern character across all drive modes.

Выява: Уверсе view of the Pico Triboro Bridge pedal, illustrating the layout of the VOL, GAIN, BASS/GATE, TREBLE/TONE knobs, and the TYPE button.

4. Drive Modes Explained

The Pico Triboro Bridge offers three distinct drive modes, each with its unique sonic characteristics:

• Overdrive Mode (Green LED): This mode provides a gain spectrum ranging from low to mid-level saturation with an open voicing. It is ideal for use as a subtle "always-on" drive, adding warmth and grit, or as a solo boost to push your ampзадымнік.
• Distortion Mode (Orange LED): Engaging this mode provides additional gain-staging, delivering tones from crunchy rhythms to fully saturated leads. It offers a more aggressive and compressed sound compared to the Overdrive mode.
• Fuzz Mode (Red LED): This mode transforms the pedal into a high-gain fuzz effect with over-the-top saturation. The BASS knob becomes a GATE control, and the TREBLE knob becomes a Low Pass Filter, allowing for unique and extreme tonal variations specific to fuzz.

5. Тэхнічныя характарыстыкі

6. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your Pico Triboro Bridge pedal, follow these maintenance guidelines:

• Уборка: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• захоўванне: Захоўвайце педаль у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў, экстрэмальных тэмператур і высокай вільготнасці, калі яна не выкарыстоўваецца.
• Сувязі: Перыядычна правярайце ўсе кабельныя злучэнні на наяўнасць зносу. Пераканайцеся, што раздымы чыстыя і без пылу і смецця.
• крыніца харчавання: Always use the recommended 9V DC center-negative power adapter. Using an incorrect power supply can damage the unit and void the warranty.

7. Выпраўленне непаладак

If you encounter issues with your Pico Triboro Bridge pedal, refer to the following common troubleshooting steps:

• Няма гуку:
  • Праверце ўсе кабельныя злучэнні (прылада да ўваходу, выхад да amp).
  • Ensure the power adapter is correctly connected and functioning.
  • Пераканайцеся, што ваш інструмент і amplifier працуюць правільна.
  • Check the pedal's bypass status; if it's true bypass, sound should pass even if the pedal is off.
• Слабы або скажоны гук (нечакана):
  • Check the GAIN and VOL knob settings.
  • Ensure the correct drive mode (Overdrive, Distortion, Fuzz) is selected for your desired sound.
  • If in Fuzz mode, adjust the GATE and TONE (Low Pass Filter) knobs, as extreme settings can significantly alter the sound.
  • Test with different cables and power supplies to rule out faulty accessories.
• Празмерны шум/гудзенне:
  • Ensure you are using a regulated, isolated power supply.
  • If in Fuzz mode, adjust the GATE knob to reduce unwanted noise.
  • Праверце наяўнасць зазямляльных контураў у вашай устаноўцы.
  • Move the pedal away from power transformers or other sources of electromagnetic interference.

8. Гарантыя і падтрымка

Electro-Harmonix products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official Electro-Harmonix webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для прэтэнзій па гарантыі.

Каб атрымаць дадатковую дапамогу, наведайце: www.ehx.com