1. Уводзіны
This manual provides essential instructions for the safe and efficient operation of your ZR ZRCC01 Mini Metal Lathe. This electroplated all-metal miniature lathe is designed for processing materials such as aluminum, wood, and plastic, making it suitable for DIY model making and small craft projects.
Выява 1: Спераду view of the ZR ZRCC01 Mini Metal Lathe, showcasing its compact design and metal construction.
2. Інфармацыя па бяспецы
- Always wear appropriate personal protective equipment, including safety glasses, when operating the lathe.
- Пераканайцеся, што нарыхтоўка надзейна замацаванаamped before starting the machine.
- Трымайце рукі і вопратку далей ад рухомых частак.
- Do not exceed recommended cutting depths for different materials to prevent motor overload.
- Disconnect power before performing any adjustments or maintenance.
- Працуйце з машынай у добра вентыляваным памяшканні.
3. Змесціва ўпакоўкі
Your ZR ZRCC01 Mini Metal Lathe package includes:
- 1 x Mini Lathe
- 1 х камплект аксесуараў
- 1 х адаптар сілкавання
- 1 x Workbench Plate
- 1 х Кіраўніцтва
4. Тэхнічныя характарыстыкі
- Хуткасць рухавіка: Да 20,000 абаротаў у хвіліну
- Уваходны кнtage/ток/магутнасць: 12В/3А/36Вт
- Switch Power Supply Input: 110В-240В
- Max Processed Material Diameter: 50 mm (Positive Jaw Gripping Range: 3mm-30mm, Opposite Jaw Gripping Range: 3mm-50mm)
- Max Processed Material Length: 150 мм
- Chuck and Collet Range: ад 1 мм да 6 мм
- X-axis Slider Travel: 150 мм
- Цэнтральная вышыня: 50 мм
- Адлегласць паміж цэнтрамі: 150 мм
- Памеры машыны: 310 мм х 100 мм х 175 мм
- Вага прадмета: 10.28 фунта
- Крыніца харчавання: AC
5. Настройка
Follow these steps to set up your mini metal lathe for operation:
- Адкрыйце патрон: Use the provided iron rods to open the three-jaw chuck.
- Устаўка дэталі: Place one end of your workpiece into the middle of the chuck.
- Замацаваць дэталь: Tighten the chuck to firmly hold the workpiece.
- Engage Live Center: Rotate the handwheel on the tailstock to push the live center into the center of the workpiece, ensuring a tight fit.
- Lock Tailstock: Tighten the tailstock and fix the screw to secure the workpiece in place.
Image 2: The mini metal lathe with a workpiece properly secured between the three-jaw chuck and the live center of the tailstock.
For a visual guide on setting up the lathe, please refer to the video below:
Video 1: Demonstration of securing a workpiece in the mini metal lathe's chuck and tailstock.
6. Аперацыя
Once the workpiece is secured, you can begin processing:
- Tool Setting: Before processing, insert the turning tool into the turning tool clamping jaw. Adjust the slider to align the turning tool horizontally with the live center and the center of the three-jaw chuck.
- Уключэнне: Уключыць такарны станок.
- Control Feed: Move the small slider in the Y-axis direction to control the feed rate.
- Control Processing Position: Move the large slider in the X-axis direction to control the processing position.
Важныя заўвагі:
- If the workpiece is not concentric or has an outer imaginary circle, remove the outer imaginary circle before proceeding.
- Глыбіня рэзкі: For wood, the cutting depth should be less than 2mm per pass. For aluminum or copper, it should be less than 1mm per pass. Exceeding these limits may cause the motor to stop due to self-protection.
Малюнак 3: Збоку view of the mini metal lathe, highlighting the tool post and the X and Y axis sliders for precise control.
Observe the lathe in operation by watching the video below:
Video 2: Demonstration of the mini metal lathe processing a workpiece, showing the movement of the sliders and the cutting action.
7. Тэхнічнае абслугоўванне
Regular maintenance ensures the longevity and optimal performance of your lathe:
- Clean the machine thoroughly after each use, removing all chips and debris.
- Lubricate moving parts, such as lead screws and slide ways, periodically with appropriate machine oil.
- Inspect all fasteners and tighten any that may have loosened during operation.
- Check the condition of the chuck jaws and replace if worn.
8. Выпраўленне непаладак
If you encounter issues with your lathe, consider the following:
- Motor Stops During Operation: This is often due to exceeding the recommended cutting depth for the material. Reduce the cutting amount per pass. The motor has a self-protection feature that will activate to prevent damage.
- Workpiece Not Secure: Ensure the three-jaw chuck is tightened properly and the live center is firmly pressed against the workpiece. Check that the tailstock screw is fixed.
- Недакладныя разрэзы: Verify that the turning tool is correctly aligned horizontally with the live center and the chuck's center. Ensure all sliders and components are free of debris and properly lubricated.
9. Гарантыя і падтрымка
The ZR ZRCC01 Mini Metal Lathe comes with a one-year warranty. Free spare parts are available during this period. For any queries or assistance, please contact our online customer service.