Кіраўніцтва карыстальніка лічбавага транспарціра SPI 31-040-9 PRO3600

1. Уводзіны

The SPI 31-040-9 Digital Protractor PRO3600 is a revolutionary tool designed to provide immediate digital indications of level, plumb, and angles. It features a light, rigid, and ultra-precise platform, utilizing a state-of-the-art sensor and microprocessor circuit for accurate readings. This instrument is built for durability, precision, and reliability, making it an essential tool for various metalworking and laboratory applications.

Асноўныя характарыстыкі:

• Floating zero provides zero selection anywhere within its 360° range.
• PRO 3600 features SPC output and excellent accuracy.
• Instant LCD Display with resolution of 0.1° up to +/-10°.
• Deviation from the true plane is measurable through full 360° (4x90°).
• Supplied in a protective plastic case.
• Top plate has a V-groove for accurate registration on curved or cylindrical surfaces.

2. Прадукт скончыўсяview

Familiarize yourself with the main components and controls of your SPI PRO3600 Digital Protractor.

3. Настройка

3.1 Устаноўка батарэі

The SPI PRO3600 is battery powered. To install or replace batteries:

1. Знайдзіце вечка батарэйнага адсека, звычайна на ніжняй або бакавой частцы прылады.
2. Open the cover using a small screwdriver or coin if necessary.
3. Insert the required batteries (refer to the battery type indicated inside the compartment, usually AAA or button cell) ensuring correct polarity (+/-).
4. Надзейна зачыніце крышку батарэйнага адсека.

3.2 Першапачатковае ўключэнне

Пасля ўсталёўкі батарэі націсніце кнопку ВКЛ/ВЫКЛ button to power on the device. The LCD display should illuminate and show a reading.

4. Інструкцыя па эксплуатацыі

4.1 Уключэнне/выключэнне сілкавання

• Каб павярнуць агрэгат ON, націсніце ВКЛ/ВЫКЛ кнопка.
• Каб павярнуць агрэгат ВЫКЛ, націсніце ВКЛ/ВЫКЛ кнопку зноў.
• The unit will automatically shut off after 6 minutes of non-use to conserve battery life.

4.2 Zeroing (ALT ZERO)

The floating zero feature allows you to set a reference point anywhere within the 360° range.

1. Place the unit on your chosen reference surface.
2. Wait approximately 5 seconds for the reading to stabilize.
3. Націсніце ALT ZERO button. The display will reset to 0.0°, establishing this as your new reference.
4. To return to the original absolute reference (factory zero), press the ALT ZERO кнопку зноў.

4.3 Holding a Reading

Каб зафіксаваць бягучае паказанне на дысплеі:

• Націсніце ТРЫМАЦЬ button. The displayed reading will be frozen.
• To unfreeze the display and resume live readings, press the ТРЫМАЦЬ кнопку зноў.

4.4 SPC Output

The PRO3600 features an SPC (Statistical Process Control) output port. This allows for data transfer to external devices for analysis. Refer to the manual for your specific SPC data collection system for connection and usage instructions.

4.5 Вымярэнне вуглоў

Place the base of the protractor firmly on the surface you wish to measure. The digital display will show the angle relative to the last set zero point. For absolute measurements, ensure the unit is zeroed on a true horizontal surface.

4.6 Using the V-Groove

The top plate of the protractor features a V-groove. This design allows for accurate registration and measurement on curved or cylindrical surfaces, such as pipes or shafts. Simply align the V-groove with the cylindrical object to obtain a stable and accurate reading.

5. Тэхнічнае абслугоўванне

5.1 Ачыстка

• Працярыце прыладу мяккай сухой тканінай.
• Для ўстойлівага бруду падыдзе злёгкуamp cloth with mild soap can be used, followed by immediate drying.
• Do not use abrasive cleaners, solvents, or immerse the unit in water.

5.2 Захоўванне

• Store the protractor in its supplied plastic case when not in use to protect it from dust, dirt, and physical damage.
• Store in a dry environment, away from extreme temperatures and direct sunlight.
• If storing for extended periods, remove the batteries to prevent leakage.

6. Выпраўленне непаладак

• Прылада не ўключаецца: Праверце ўстаноўку батарэек і пераканайцеся, што яны не разраджаныя. Пры неабходнасці заменіце.
• Няправільныя паказанні: Ensure the measurement surface is clean and stable. Perform an ALT ZERO calibration on a known true reference surface.
• Unit shuts off unexpectedly: The unit has an automatic shut-off feature after 6 minutes of non-use. This is normal operation. If it shuts off during active use, check battery levels.
• Дысплей цьмяны або мігоча: Магчыма, батарэйкі разраджаныя. Заменіце іх.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

8.1 Інфармацыя аб гарантыі

SPI measuring instruments are backed by an industry-leading 2-Year warranty, ensuring their durability, precision, and reliability. Please retain your proof of purchase for warranty claims.

8.2 Падтрымка кліентаў

For technical assistance, warranty service, or inquiries regarding your SPI PRO3600 Digital Protractor, please contact SPI customer support through their official webсайт або прадаўца, у якога вы набылі тавар.