Rfiver Tripod TV Stand Instruction Manual

Прадукт скончаныview

The Rfiver Tripod TV Stand is designed to securely hold 37-80 inch LED, LCD, and OLED flat or curved screen televisions. This portable and height-adjustable stand offers flexibility for various viewing environments, supporting TVs up to 110 lbs.

Асноўныя функцыі ўключаюць у сябе:

• High-strength alloy steel construction for stability.
• Adjustable height from 51 inches to 75 inches.
• Tilt adjustment up to 15 degrees (up and down).
• Складаная канструкцыя для зручнай транспарціроўкі і захоўвання.
• Compatible with VESA mounting patterns from 100x100mm to 600x400mm.
• Integrated safety features including a safety pin and safety locks.

Інфармацыя па бяспецы

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.

• Ёмістасць вагі: Не перавышайце максімальную грузападымальнасць 50 кг (110 фунтаў). Гэтая падстаўка прызначана для тэлевізараў з дыяганаллю ад 37 да 80 цаляў.
• Стабільнасць: Ensure the tripod legs are fully extended and locked in place on a flat, stable surface. The triangular design provides stability, but always verify the stand is secure before mounting a TV.
• Ахоўны шпілька: Always use the provided safety pin to secure the height adjustment mechanism after setting the desired height.
• Мацаванне тэлевізара: Ensure your TV's VESA pattern is compatible with the stand (100x100mm to 600x400mm). Use the correct screws and spacers as per your TV's manual.
• Дзеці і хатнія жывёлы: Keep children and pets away from the TV stand during assembly and operation. Do not allow them to climb on or play with the stand or mounted TV.
• Рух: When moving the stand with a TV mounted, exercise extreme caution. It is recommended to remove the TV before relocating the stand for maximum safety.

Змест пакета

Перад пачаткам зборкі пераканайцеся, што ўсе кампаненты ў наяўнасці. Калі якія-небудзь дэталі адсутнічаюць або пашкоджаныя, звярніцеся ў службу падтрымкі кліентаў.

(Note: Specific part list not provided in JSON, general statement used.)

Ўстаноўка і зборка

Follow these steps for proper assembly of your Rfiver Tripod TV Stand. It is recommended to have a second person assist with mounting the TV.

Step 1: Assemble the Tripod Base

Carefully unpack all components. Extend the tripod legs until they are fully spread and stable. Ensure the base is on a level surface.

Image: The tripod base with white lines indicating the safe height range for leg extension. Ensure legs are spread within this range for stability.

Step 2: Attach the TV Mounting Plate to the Pole

Secure the TV mounting plate to the central pole of the tripod. Use the provided hardware and ensure all connections are tight.

Image: Diagram illustrating the height adjustment mechanism, including the safety lock, height adjustment knob, and security pin. This shows how the mounting plate attaches to the pole.

Step 3: Adjust Height and Secure with Safety Pin

Adjust the central pole to your desired height (between 51" and 75"). Once the height is set, insert the safety pin through the designated hole and tighten the height adjustment knob. This prevents accidental slippage.

Выява: Крупны план view of the safety features, including the white line indicator for the safe height range and the safety lock mechanism to prevent the TV from falling.

Step 4: Attach TV Brackets to Your Television

Attach the provided TV brackets to the back of your television using the appropriate screws and spacers for your TV model. Refer to your TV's manual for correct VESA mounting screw sizes.

Крок 5: Усталюйце тэлевізар на падстаўку

With assistance, carefully lift your television and hook the attached TV brackets onto the mounting plate on the stand. Ensure the TV is centered and securely seated. Engage any safety locks on the brackets to prevent the TV from sliding off.

Image: The Rfiver Tripod TV Stand with a television mounted, highlighting its robust design and stability.

Інструкцыя па эксплуатацыі

Рэгуляванне вышыні

To adjust the height of the TV, first remove the safety pin and loosen the height adjustment knob. Carefully raise or lower the central pole to the desired position. Re-insert the safety pin and tighten the knob securely before releasing the pole.

Рэгуляванне нахілу

The TV mounting plate allows for a tilt adjustment of up to 15 degrees up or down. Loosen the tilt adjustment knobs on the side of the mounting plate, adjust the TV to the desired angle, and then securely tighten the knobs.

Image: A television mounted on the stand, illustrating the +/- 15 degree tilt adjustment capability for optimal viewныя вуглы.

Пераноснасць і захоўванне

The stand features a foldable design for easy transport and storage. To fold, first remove the TV. Then, loosen the necessary knobs and collapse the central pole and tripod legs. This allows for compact storage and transport, such as in a car trunk.

Image: The Rfiver Tripod TV Stand in its folded state, demonstrating its compact size for easy transport and storage in a vehicle.

Image: A diagram showing the process of folding the TV stand for compact storage, emphasizing its portability.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and safe operation of your TV stand.

• Уборка: Wipe the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Праверка абсталявання: Periodically check all screws, bolts, and knobs to ensure they are tight and secure. Re-tighten if necessary.
• агляд: Inspect the tripod legs and central pole for any signs of damage, bending, or wear. Do not use the stand if any components are compromised.

Ліквідацыю непаладак

If you encounter issues with your Rfiver Tripod TV Stand, refer to the following common solutions:

• Падстаўка нестабільная:
  • Ensure the tripod legs are fully extended and locked on a flat, level surface.
  • Verify that the TV weight does not exceed 110 lbs and is within the 37-80 inch size range.
  • Check all connection points and tighten any loose screws or knobs.
• TV is Not Level:
  • Adjust the tilt mechanism to level the TV.
  • Ensure the TV mounting brackets are evenly attached to the TV and the stand.
• Цяжкасці з рэгуляваннем вышыні:
  • Loosen the height adjustment knob completely and ensure the safety pin is fully removed before attempting to adjust.
  • Do not force the pole; ensure no obstructions are present.

For further assistance, please contact Rfiver customer support.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

All Rfiver products are backed by a 5-year manufacturer's warranty, ensuring quality and customer satisfaction. For warranty claims, technical support, or missing parts, please contact Rfiver customer service.

Please visit the official Rfiver webсайт або звярніцеся да дакументацыі па куплі, каб атрымаць канкрэтную кантактную інфармацыю.