TOTAL TBLI2002 20V Cordless Lithium-Ion Heat Gun

1. Уводзіны

Thank you for choosing the TOTAL TBLI2002 20V Cordless Lithium-Ion Heat Gun. This portable tool is designed for various applications requiring precise heat, such as welding, heat shrink tubing, and loosening rusted bolts. Its cordless design offers excellent mobility and convenience. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image 1.1: The TOTAL TBLI2002 Cordless Heat Gun. This image shows the main unit of the heat gun, highlighting its ergonomic design and the nozzle at the front.

2. Інструкцыі па тэхніцы бяспекі

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using this tool.

• Прачытайце ўсе інструкцыі: Азнаёмцеся з правіламі эксплуатацыі інструмента і тэхнікай бяспекі.
• Асабістая бяспека: Карыстайцеся адпаведнымі сродкамі індывідуальнай абароны, у тым ліку ахоўнымі акулярамі і тэрмаўстойлівымі пальчаткамі.
• Працоўная зона: Ensure your work area is well-ventilated and free from flammable materials. Do not use in explosive atmospheres.
• Пазбягайце кантакту: The nozzle and accessories become extremely hot during and after use. Avoid direct contact with skin.
• Правільнае захоўванне: Allow the tool to cool completely before storing. Store in a dry, secure place out of reach of children.
• Бяспека акумулятара: Use only specified 20V Lithium-Ion batteries and chargers (sold separately). Do not expose batteries to heat or water.
• Абарона ад перагрэву: The tool is equipped with overheat protection. If it shuts off, allow it to cool before resuming use.

3. Прадукт скончыўсяview

Understand the main components of your TOTAL TBLI2002 heat gun.

1. Heat Nozzle: Накіроўвае гарачае паветра.
2. Вентыляцыйныя адтуліны: For cooling and air intake.
3. Выключальнік сілкавання: Controls ON/OFF and temperature/airflow settings.
4. Ручка: Эрганамічная ручка для камфортнага выкарыстання.
5. Порт батарэі: Where the 20V Lithium-Ion battery (sold separately) is inserted.

Малюнак 3.1: У разабраным выглядзе view of the heat gun showing included nozzles and a diagram of the battery compartment. This image illustrates the main components and how accessories attach.

Image 3.2: Close-up of the product label, detailing voltage, temperature, and airflow specifications.

4. Настройка

4.1 Устаноўка батарэі

The TOTAL TBLI2002 requires a 20V Lithium-Ion battery, which is sold separately. Ensure the battery is fully charged before use.

• Align the battery with the battery port at the base of the heat gun handle.
• Устаўце акумулятар у порт, пакуль ён надзейна не зафіксуецца пачуўшы пстрычку.
• Каб выняць акумулятар, націсніце кнопку фіксацыі акумулятара (калі яна ёсць) і выцягніце яго.

Малюнак 4.1: Збоку view of the heat gun with a 20V battery attached, demonstrating proper battery installation.

4.2 Мацаванне фарсункі

The heat gun comes with various nozzles for different applications:

• Рэдукцыйная насадка: For concentrating heat on small areas.
• Адбівальнае сопла: For heat shrink tubing or bending plastic pipes.
• Плоская насадка: For spreading heat over a wider area, such as paint stripping.

To attach a nozzle:

• Ensure the heat gun is off and cool.
• Slide the desired nozzle onto the heat nozzle until it is firmly seated.
• To remove, pull the nozzle off once the tool has cooled.

Image 4.2: The heat gun shown with a flat nozzle attached, ready for use.

5. Інструкцыя па эксплуатацыі

5.1 Powering On/Off and Temperature/Airflow Settings

The power switch typically has multiple positions to control both power and heat/airflow settings.

• ВЫКЛ. (0): The tool is off.
• Налада 1: Provides lower temperature (300°C) and lower airflow (100 L/min).
• Налада 2: Provides higher temperature (550°C) and higher airflow (200 L/min).

Для працы:

1. Ensure the battery is installed and a suitable nozzle is attached.
2. Slide the power switch to the desired setting (1 or 2). The tool will begin to heat up.
3. Direct the hot air towards the workpiece, maintaining a safe distance to avoid scorching or damage.
4. After use, slide the power switch to the OFF (0) position.
5. Allow the tool to cool down completely before handling the nozzle or storing.

Малюнак 5.1: Верх view of the heat gun, showing the power switch with its distinct settings.

5.2 Агульныя парады па выкарыстанні

• Always test on a scrap piece of material first to determine the optimal temperature and distance.
• Keep the heat gun moving to prevent overheating a single spot.
• For delicate materials, use the lower temperature setting and maintain a greater distance.

6. Тэхнічнае абслугоўванне

Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і бяспечную працу вашай цеплавой гарматы.

• Уборка: After each use, ensure the tool is cool. Wipe the exterior with a soft, damp тканіна. Не выкарыстоўвайце агрэсіўныя хімікаты або абразіўныя ачышчальнікі.
• Празрыстыя вентыляцыйныя адтуліны: Regularly check and clear the air intake and exhaust vents of any dust or debris to prevent overheating. Use a soft brush or compressed air if necessary.
• Сыход за асадкамі: Clean nozzles after use, ensuring they are free of residue.
• захоўванне: Store the heat gun and its accessories in a dry, clean, and secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed for long-term storage.

Выява 6.1: Спераду view of the heat gun, highlighting the air vents that require regular cleaning.

7. Выпраўленне непаладак

Калі ў вас узніклі праблемы з цеплавой гарматай, звярніцеся да наступных распаўсюджаных праблем і іх рашэнняў:

Калі праблема не знікне пасля выкарыстання гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Total Tools webсайт. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.

For further assistance, please contact Total customer service.