BWT Cosmy The Bot 250 Robotic Pool Cleaner Instruction Manual

1. Уводзіны

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Інфармацыя па бяспецы

Заўсёды выконвайце наступныя меры бяспекі, каб знізіць рызыку траўмаў або пашкоджанняў:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Трымайце дзяцей і хатніх жывёл далей ад басейна, калі працуе ачышчальнік.
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Do not use the cleaner if there are people in the pool.
• Перад пачаткам працы пераканайцеся, што ачышчальнік цалкам пагружаны ў ваду.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Кампаненты прадукту

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Асноўны блок: The robotic cleaner body, housing the motor and filtration system.
• Кошык фільтра: Removable basket for collecting debris.
• Brushes/Rollers: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• Блок харчавання: Converts AC power to safe DC power for the cleaner.

Выява 3.1: Спераду view of the cleaner, highlighting the cleaning brushes and intake area.

Малюнак 3.2: Ніжні бок view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

Малюнак 3.3: Унутраная частка view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Настройка

1. Распакуйце ачышчальнік: Carefully remove the cleaner and all accessories from the packaging.
2. Connect the Floating Cable: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Месца ў басейне: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Падключыць: Падключыце блок сілкавання да заземленай электрычнай разеткі.

5. Інструкцыя па эксплуатацыі

1. Пачаць цыкл ачысткі: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Рэгуляванне магутнасці ўсмоктвання: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Ачыстка манітора: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Выдаліць з пула: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

6.1. Ачыстка фільтруючага кошыка

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Адключыць харчаванне: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Адкрыць адсек фільтра: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Зняць фільтруючы кошык: Grasp the handle of the filter basket and lift it out of the cleaner.
4. Фільтр прамывання: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Зноў устаўце фільтр: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Зачыніць вечка: Close the filter compartment lid securely.

Малюнак 6.1: Верх view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Агульная ўборка і захоўванне

• Пасля кожнага выкарыстання прамыйце ачышчальнік прэснай вадой, каб выдаліць любыя хімікаты для басейна або смецце.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Захоўвайце ачышчальнік у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
• Coil the floating cable loosely to prevent kinks or damage.

7. Выпраўленне непаладак

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Калі праблема не знікне пасля спробы гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

вытворца: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.