Yisuro Porch Lights with GFCI Outlet and Motion Sensor

Уводзіны

Thank you for choosing the Yisuro Porch Lights. This product is designed to provide reliable outdoor illumination with added convenience and safety features. It includes integrated GFCI (Ground Fault Circuit Interrupter) outlets, a dusk-to-dawn sensor, and multiple lighting modes to suit various needs. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.

Image: Two Yisuro porch lights with motion sensors and GFCI outlets.

Інфармацыя па бяспецы

• Электрабяспека: Installation must be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Always turn off power at the circuit breaker before installation or maintenance.
• Зазямленне: Ensure the fixture is properly grounded to prevent electrical shock.
• Гандлёвыя кропкі GFCI: The built-in GFCI outlets provide protection against electrical shock. Test the GFCI outlets monthly as per standard safety practices.
• Сумяшчальнасць лямпачкі: Use only E26 base DIMMABLE LED or incandescent bulbs, with a maximum wattage 100 Вт.
• Вышыня ўстаноўкі: Install the porch light with the outlet at least 4 feet (1.2 meters) from the ground.
• Воданепранікальнасць: While weather-resistant, ensure all connections are sealed properly during installation to maintain water integrity.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Yisuro Porch Light Fixture (2 units for 2-pack)
• Мантажныя прыналежнасці (шрубы, гайкі, мантажная пласціна)
• Кіраўніцтва па эксплуатацыі

Заўвага: E26 light bulbs are NOT included and must be purchased separately.

Image: Components and dimensions of the Yisuro porch light.

Прадукт скончаныview і Асаблівасці

• Integrated GFCI Outlets: Two ground fault circuit interrupter outlets suitable for two-pronged and three-pronged plugs. Provides protection against power surges, short circuits, and other electrical faults. Max power 14.5AWG, Max Load 1080W. Outlets are downward-facing for rain protection.
• Датчык ад змяркання да світання: Automatically detects ambient light levels to control lighting operation.
• Датчык руху: Detects movement within a 270-degree, 33-foot range to trigger full brightness in certain modes.
• 3 рэжымаў асвятлення: High Mode, Low Mode, and Manual Mode for versatile operation.
• Трывалая канструкцыя: Made with reinforced tempered water glass, clear glass, and high-quality black aluminum with golden edge painting. Corrosion-resistant and designed to withstand various weather conditions (IP65 Waterproof, Snowproof, Storm Resistant, Heat Resistant).
• E26 Ceramic Socket: Heat-resistant ceramic E26 base socket for longer service life. Compatible with dimmable LED/incandescent bulbs (Max 100W).
• Easy Bulb Access: Open bottom design allows for easy bulb installation and cleaning without disassembly.

Image: Detail of the GFCI outlets with specifications.

Image: Weather resistance features of the light fixture.

Тэхнічныя характарыстыкі

Настройка і ўстаноўка

Перш чым пачаць:

• Адключыце сілкаванне на аўтаматычным выключальніку.
• Ensure the installation surface is stable and can support the fixture's weight.
• Падрыхтуйце неабходныя інструменты (адвёртку, інструменты для зачысткі правадоў, ізаляцыйную стужку і г.д.).

Этапы ўстаноўкі:

1. Падрыхтуйце праводку: Carefully remove your existing light fixture, if any. Identify the live (black), neutral (white), and ground (green or bare copper) wires from your electrical box.
2. Прымацаваць мантажную пласціну: Secure the provided mounting plate to your electrical box using the screws.
3. Падключыце правады: Connect the wires from the fixture to your house wiring using wire nuts:
   • Fixture black wire to house black wire (Live).
   • Fixture white wire to house white wire (Neutral).
   • Fixture ground wire to house ground wire.
   Пераканайцеся, што ўсе злучэнні надзейныя.
4. Мацаванне: Акуратна выраўнуйце прыстасаванне з мантажнай пласцінай і замацуйце яго прыкладзенымі шрубамі.
5. Усталяваць лямпачку: Insert an E26 base dimmable LED or incandescent bulb (Max 100W) into the ceramic socket. The open bottom design allows for easy access.
6. Аднавіць сілу: Зноў уключыце сілкаванне на аўтаматычным выключальніку.
7. Reset GFCI: After installation, press the "RESET" button located between the GFCI outlets to activate them for use.

Важна: The light fixture should be installed at least 4 feet from the ground for optimal GFCI outlet functionality and safety.

Інструкцыя па эксплуатацыі

The Yisuro Porch Light features three lighting modes, adjustable via a switch located on the motion sensor unit. The factory default setting is typically 'High Mode'.

Выява: Зверхуview of the 3 lighting modes and mode selection switch.

Выбар рэжыму

To change modes, locate the small switch on the motion sensor unit at the top of the fixture. Slide the switch to select your desired mode:

• Высокі рэжым: The light stays at 30% brightness all night. When motion is detected, it brightens to 100% for 60 seconds, then returns to 30% brightness.
• Нізкі рэжым: The light remains off at night when no movement is detected. When motion is detected, it turns on to 100% brightness for 60 seconds, then turns off.
• Ручной рэжым: In Auto mode (High or Low), quickly toggle the wall switch "on-off-on" within 0.5-2 seconds to enter Manual Mode. The light will turn on and stay at 100% brightness for 8 hours, or until the dusk-to-dawn sensor detects light in the morning. To exit Manual Mode, toggle the wall switch off and on again, or wait for the 8-hour cycle to complete.

Image: Explanation of High Mode operation.

Image: Explanation of Low Mode operation.

Image: Explanation of Manual Mode activation.

Тэхнічнае абслугоўванне

• Уборка: Каб ачысціць прыбор, пераканайцеся, што электрычнасць адключана з дапамогай аўтаматычнага выключальніка. Выкарыстоўвайце мяккую губку.amp cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass.
• Замена лямпачкі: Turn off power at the circuit breaker. Unscrew the old bulb and screw in a new E26 base dimmable LED or incandescent bulb (Max 100W).
• Тэставанне GFCI: Test the GFCI outlets monthly. Plug a small appliance (like a nightlight) into the GFCI outlet. Press the "TEST" button. The appliance should turn off. Press the "RESET" button. The appliance should turn back on. If it does not, the GFCI may be faulty and should be replaced by a qualified electrician.
• Ачыстка датчыка: Keep the motion and dusk-to-dawn sensors clean and free from obstructions (e.g., spiderwebs, dirt) to ensure optimal performance.

Ліквідацыю непаладак

Гарантыя і падтрымка

Yisuro products are designed for quality and durability. For specific warranty details, please refer to the warranty card included with your purchase or contact Yisuro customer support directly.

If you encounter any issues or have questions regarding your Yisuro Porch Lights, please contact our customer support team. Provide your model number (T-HWBD2003) and purchase details for faster service.

Кантактная інфармацыя: Please refer to the contact information provided on the product packaging or the official Yisuro webсайт.