BSTUOKEY M203 Door Access Control Keypad User Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of the BSTUOKEY M203 Door Access Control Keypad. This stand-alone device offers secure access management using RFID cards, passwords, or a combination of both. It is designed for various applications including homes, offices, and restricted areas.

2. Інфармацыя па бяспецы

• Ensure the power supply is disconnected before installation or maintenance to prevent electrical shock.
• The device operates on a 12V DC power supply. Using an incorrect voltage можа пашкодзіць прыладу.
• This product is designed for indoor use. Exposure to outdoor elements (rain, direct sunlight, extreme temperatures) may cause damage and void the warranty.
• Не спрабуйце разбіраць або рамантаваць прыладу самастойна. Звярніцеся па абслугоўванне да кваліфікаванага персаналу.
• Keep the device away from strong magnetic fields to avoid interference with RFID functionality.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• 1 x BSTUOKEY M203 Access Control Keypad
• 5 x RFID Keyfobs (Blue)
• 1 x Connection Cable Set
• 1 х Кіраўніцтва карыстальніка (гэты дакумент)
• Мантажныя шрубы і дзюбелі

Image: Ten blue RFID keyfobs, similar to the five included with the keypad, used for access control.

4. Прадукт скончыўсяview

The BSTUOKEY M203 is a compact and versatile access control keypad. It features a touch-sensitive keypad for password entry, an integrated RFID reader for card access, and an indicator light for status feedback. It supports up to 1000 users.

Image: The BSTUOKEY M203 access control keypad shown alongside five blue RFID keyfobs. The keypad has a black face with silver trim, featuring a numeric touch keypad, a bell icon, and an RFID card icon.

Image: A diagram highlighting the key components of the M203 keypad: Indicator light, ID Card Area (RFID reader supporting 1000 users), Touch Keyboard, and Door Bell button (requires external doorbell connection).

5. Тэхнічныя характарыстыкі

Image: A diagram illustrating the dimensions of the M203 keypad: 120mm length, 78mm width, and 20mm thickness.

6. Настройка і ўстаноўка

6.1 Электрычная схема

Refer to the following wiring diagram for proper connection of the access control keypad to a power supply, electric lock, doorbell, and exit switch.

Image: A comprehensive wiring diagram showing connections for the RFID Access Controller (M203), a 12V power supply, an electric bolt lock, an exit switch, and an external doorbell. Key connections include NC, NO, GND, 12V, BELL, OPEN, and COM terminals.

6.2 Сістэма скончанаview

The diagram below illustrates a typical access control system setup using the M203 keypad, power supply, electric lock, doorbell, and exit button.

Image: An illustrative diagram of an access control system. It shows the "Access control machine" (M203 keypad) mounted next to a door, connected to a "Power Supply Control" unit, which in turn connects to a magnetic lock (180kg Maglock) above the door, an "Exit Button" inside, and an external "Doorbell".

6.3 Фізічная ўстаноўка

1. Месца мантажу: Choose a suitable indoor location near the door, ensuring it is protected from moisture and direct sunlight.
2. Бяспечнае мацаванне: Use the provided screws and wall plugs to securely mount the keypad to the wall. Ensure the back panel is flush and stable.
3. Праводка: Connect the keypad to your 12V DC power supply, electric lock, exit button, and external doorbell according to the wiring diagram in Section 6.1. Pay close attention to polarity and terminal labels (NC, NO, GND, 12V, BELL, OPEN, COM).
4. Уключэнне: Once all connections are secure, connect the 12V DC power supply. The indicator light on the keypad should illuminate.

7. Інструкцыя па эксплуатацыі

7.1 Налады па змаўчанні

• Default Programming Password: 123456
• The keypad is initially in standby mode.

7.2 Рэжым праграмавання

Каб увайсці ў рэжым праграмавання:

1. Прэса *.
2. Enter the 6-digit programming password (default: 123456).
3. Прэса #.
4. The indicator light will change, indicating entry into programming mode.

Каб выйсці з рэжыму праграмавання, націсніце *.

7.3 Changing the Programming Password

1. Enter programming mode (Section 7.2).
2. Прэса 0.
3. Enter the new 6-digit programming password.
4. Прэса #.
5. Re-enter the new 6-digit programming password.
6. Прэса # каб пацвердзіць.
7. Выйсці з рэжыму праграмавання.

7.4 Adding User Cards (Keyfobs)

1. Enter programming mode (Section 7.2).
2. Прэса 1.
3. Present each RFID keyfob to the ID Card Area on the keypad. The keypad will beep to confirm each card is added.
4. After adding all desired cards, press * to save and exit card adding mode.
5. Выйсці з рэжыму праграмавання.

7.5 Adding User Passwords

1. Enter programming mode (Section 7.2).
2. Прэса 2.
3. Enter a 4-digit user ID (e.g., 0001).
4. Прэса #.
5. Enter a 4-digit to 6-digit user password.
6. Прэса #.
7. Repeat for additional user passwords.
8. Прэса * to save and exit password adding mode.
9. Выйсці з рэжыму праграмавання.

7.6 Deleting User Cards/Passwords

To delete a single user card:

1. Enter programming mode (Section 7.2).
2. Прэса 3.
3. Present the RFID keyfob to be deleted to the ID Card Area. The keypad will beep to confirm deletion.
4. Прэса * каб захаваць і выйсці.
5. Выйсці з рэжыму праграмавання.

To delete a single user password:

1. Enter programming mode (Section 7.2).
2. Прэса 4.
3. Enter the 4-digit user ID of the password to be deleted.
4. Прэса #.
5. Прэса * каб захаваць і выйсці.
6. Выйсці з рэжыму праграмавання.

To delete all user cards and passwords:

1. Enter programming mode (Section 7.2).
2. Прэса 5.
3. Прэса # каб пацвердзіць.
4. Выйсці з рэжыму праграмавання.

7.7 Accessing the Door

The M203 supports three access methods:

Image: A visual representation of the three access methods for the M203 keypad: 1. Card (swiping an RFID keyfob), 2. Password (entering a numeric code), and 3. Password + Card (requiring both a code and an RFID keyfob).

1. Доступ да карты: Present a registered RFID keyfob to the ID Card Area. The door will unlock briefly.
2. Password Access: Enter your registered user password (4-6 digits) and press #. The door will unlock briefly.
3. Card + Password Access: Present your registered RFID keyfob to the ID Card Area, then enter your registered user password and press #. The door will unlock briefly.

The default access mode is Card or Password. To change the access mode, refer to the advanced settings in the full manual (if available).

7.8 Функцыя дзвярнога званка

If an external doorbell is connected, pressing the Званочак button on the keypad will activate the doorbell.

8. Тэхнічнае абслугоўванне

• Уборка: Wipe the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• крыніца харчавання: Ensure a stable 12V DC power supply. Fluctuations can affect performance.
• Рэгулярнае тэставанне: Periodically test the access control system to ensure all functions (card access, password access, exit button, doorbell) are working correctly.
• Рэзервовае капіраванне: Keep a record of your programming password and user IDs in a secure location.

9. Выпраўленне непаладак

10. Гарантыя і падтрымка

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Please have your product model number (M203) and purchase information ready.

For further assistance, visit the BSTUOKEY store: BSTUOKEY Store on Amazon.