VitrA Origin A4711136WTC Built-in Touchless Basin Інструкцыя па эксплуатацыі крана

Уводзіны

Thank you for choosing the VitrA Origin A4711136WTC Built-in Touchless Basin Faucet. This manual provides essential information for the safe installation, operation, and maintenance of your new faucet. Please read these instructions carefully before installation and keep them for future reference.

Інфармацыя па бяспецы

• Перад пачаткам мантажу пераканайцеся, што ўсе лініі падачы вады адключаны.
• Калі вы не ўпэўненыя ў якім-небудзь этапе працэсу ўстаноўкі, звярніцеся да кваліфікаванага сантэхніка.
• Do not use abrasive cleaners or harsh chemicals on the faucet surface, as this may damage the finish.
• Берагчы прадукт ад замярзання.

Настройка і ўстаноўка

Proper installation is crucial for the optimal performance of your touchless faucet. Refer to the technical drawing below for precise measurements and component placement.

Неабходныя інструменты:

• Развадны ключ
• Адвёртка (крыжовая і плоская)
• Дрыль (калі патрэбныя новыя адтуліны)
• Герметычная стужка (PTFE стужка)
• Вымяральная стужка і аловак

Этапы ўстаноўкі:

1. Падрыхтуйце месца ўстаноўкі: Ensure the wall cavity or mounting surface is clean, dry, and structurally sound. Turn off the main water supply.
2. Mount the Built-in Body: Position the built-in body according to the dimensions provided in the technical drawing. Secure it firmly to the wall structure using appropriate fasteners. Ensure it is level and plumb.
3. Падключэнне водазабеспячэння: Connect the hot and cold water supply lines to the designated inlets on the built-in body. Use sealant tape on threaded connections to prevent leaks.
4. Install the Spout and Sensor Unit: Carefully insert the faucet spout and the sensor unit into their respective openings on the finished wall surface. Ensure they are properly aligned and secured.
5. Connect Electrical/Battery Supply: Connect the sensor unit to its power source (e.g., battery pack or mains adapter, if applicable). Follow the specific wiring instructions provided with the product.
6. Test for Leaks and Functionality: Slowly turn on the main water supply and check all connections for leaks. Test the sensor by placing your hands in front of it to ensure water flows correctly. Adjust sensor sensitivity if necessary (refer to specific product instructions for adjustment).

Figure 1: Technical drawing illustrating the dimensions for the VitrA Origin A4711136WTC built-in touchless basin faucet. This diagram shows the main body dimensions, mounting plate, and spout projection. All measurements are in millimeters.

Інструкцыя па эксплуатацыі

The VitrA Origin A4711136WTC faucet operates automatically via an infrared sensor.

• Актывацыя патоку вады: Place your hands within the sensor's detection range (typically 5-15 cm from the sensor eye). The water will begin to flow automatically.
• Спыненне патоку вады: Remove your hands from the sensor's detection range. The water flow will stop automatically after a short delay.
• Рэгуляванне тэмпературы: This model is a touchless faucet, typically designed for pre-mixed water or a single temperature. If your installation includes a separate temperature mixing valve, adjust the desired water temperature using that valve before use. The faucet itself does not have a direct temperature control lever.
• Дыяпазон датчыкаў: The sensor is calibrated for optimal performance. Avoid placing objects directly in front of the sensor when not in use to prevent unintended activation.

Тэхнічнае абслугоўванне

Рэгулярная чыстка і абслугоўванне забяспечаць даўгавечнасць і аптымальную працу вашага крана.

• Cleaning the Faucet Surface: Use a soft cloth and mild soap and water to clean the exterior surfaces. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots. Do not use abrasive cleaners, scouring pads, or chemical solvents.
• Cleaning the Sensor Eye: Gently wipe the sensor eye with a soft, damp cloth to remove any dust or residue that might interfere with its operation.
• Абслугоўванне аэратара: Periodically unscrew the aerator at the tip of the spout and clean any mineral deposits or debris. Rinse it under running water and reattach it securely.
• Замена батарэі (калі ёсць): If the faucet is battery-operated and water flow becomes weak or inconsistent, it may be time to replace the batteries. Refer to the specific battery compartment location and type in your product's detailed instructions. Ensure correct polarity when inserting new batteries.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

• мадэль: VitrA Origin A4711136WTC
• Тып: Built-in Touchless Basin Кран
• Марка: VitrA
• Тып ўстаноўкі: Wall-mounted, built-in
• матэрыял: (Not specified in product data, typically brass with finish)
• Фініш: Matte Black (as per product title, though model number is generic)
• Памеры: Refer to Figure 1 for detailed installation dimensions (e.g., spout projection 190mm, mounting plate 180x110mm, sensor unit diameter 58mm).
• крыніца харчавання: (Typically battery or mains adapter for touchless faucets, not specified in input)

Гарантыя і падтрымка

VitrA products are manufactured to the highest quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official VitrA webсайт.

For technical assistance, spare parts, or any other inquiries, please contact VitrA customer support. Contact details can typically be found on the VitrA webна сайце або ў чэку аб куплі.

You can visit the VitrA store on Amazon for more products: VitrA Store