Diyeeni XT30 XT60 FPV Drone Smoke Stopper User Manual

1. Уводзіны

The Diyeeni XT30 XT60 FPV Drone Smoke Stopper is a safety device designed to protect your FPV drone and its components from damage during initial power-on or after modifications. It acts as a resettable fuse, limiting current flow in case of a short circuit, indicated by an LED and an alarm buzzer. This device is compatible with 2-6S RC quadcopters and features both XT30 and XT60 connectors for versatile use.

2. Інфармацыя па бяспецы

• Важна: Only one battery can be inserted into either the XT30 or XT60 input jack at a time. Do not connect batteries to both input jacks simultaneously.
• The product input voltage is 2-6S. Ensure your drone's components can withstand this voltagе дыяпазон.
• Do not attempt to fly or push the throttle with the smoke stopper connected, as it has a maximum output current limit of 1A. This device is for initial power-on testing only.
• Always inspect the smoke stopper for any visible damage before each use.
• Трымайце прыладу далей ад вады і экстрэмальных тэмператур.
• This device is not a substitute for proper wiring and component selection.

3. Прадукт скончыўсяview

The Diyeeni XT30 XT60 FPV Drone Smoke Stopper is a compact device featuring input and output connectors, an LED indicator, and an alarm buzzer.

Малюнак 3.1: У цэлым view of the Diyeeni XT30 XT60 FPV Drone Smoke Stopper.

• XT30/XT60 Input Connectors: For connecting your drone battery.
• XT30/XT60 Output Connectors: For connecting to your drone's power input.
• Святлодыёдны індыкатар: Provides visual status updates.
• Гукавы сігнал: Provides audible alerts for short circuits.

Figure 3.2: Detail of the XT30 and XT60 input/output connectors.

4. Тэхнічныя характарыстыкі

Figure 4.1: Back of the smoke stopper displaying input voltagе і бягучыя спецыфікацыі.

5. Настройка

Follow these steps to properly connect the smoke stopper to your FPV drone:

1. Вызначыць злучальнікі: Determine whether your drone battery and drone power input use XT30 or XT60 connectors. The smoke stopper provides both options.
2. Connect to Drone: Plug the appropriate output connector (XT30 or XT60) of the smoke stopper into your drone's power input port.
3. Падключыце акумулятар: Plug your drone battery into the corresponding input connector (XT30 or XT60) on the smoke stopper. Ensure only one battery is connected at a time.
4. Праверце злучэнне: Double-check all connections to ensure they are secure and correctly oriented.

Figure 5.1: The smoke stopper with both XT30 and XT60 connectors visible for connection.

6. Аперацыя

Once connected, the smoke stopper will monitor the current flow to your drone.

6.1 LED Indicator and Alarm Buzzer

• Нармальны рэжым працы: When the drone is powered on and no short circuit is detected, the LED indicator will remain суцэльны зялёны. This indicates a safe power-on.
• Short Circuit Detected: If a short circuit or excessive current draw (above 1.2A trip current) is detected, the LED indicator will turn выключаны, and the alarm buzzer will start гукавы сігнал. This alerts you to an issue, preventing potential damage to your drone components.

Малюнак 6.1: Верх view highlighting the LED indicator and alarm buzzer.

6.2 Post-Detection

If the smoke stopper detects a short circuit:

1. Immediately disconnect the battery from the smoke stopper.
2. Inspect your drone's wiring and components for any visible shorts, incorrect connections, or damaged parts.
3. Rectify any identified issues before attempting to power on again.
4. Once the issue is resolved, reconnect the smoke stopper and battery to re-test. The smoke stopper will automatically reset once the short circuit condition is removed.

7. Тэхнічнае абслугоўванне

• Keep the smoke stopper clean and free from dust and debris.
• Захоўваць у сухім месцы пры пакаёвай тэмпературы.
• Regularly check the connectors for wear or damage. Replace the device if connectors are loose or damaged.
• Do not attempt to open or modify the device, as this will void any potential warranty and may cause malfunction.

8. Выпраўленне непаладак

9. Гарантыя і падтрымка

For warranty information or technical support, please contact the manufacturer, Diyeeni, through their official channels or the retailer where the product was purchased. Please provide your model number (Diyeeni1zo2fibgvs) and purchase details when seeking support.

Manufacturer: Diyeeni

Model Number: Diyeeni1zo2fibgvs