PAL 120W Multi Color Dual Zone Remote Control Transformer Instruction Manual

1. Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120). This device is engineered to power and control multi-color LED lighting systems, offering advanced dual-zone functionality for versatile and dynamic lighting solutions in various applications.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Невыкананне гэтых інструкцый па бяспецы можа прывесці да пажару, паражэння электрычным токам, траўмаў або пашкоджання вырабу ці маёмасці.

• Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on the transformer or connected lighting.
• Устаноўка павінна выконвацца кваліфікаваным электрыкам у адпаведнасці з усімі мясцовымі і нацыянальнымі электрычнымі нормамі.
• Do not operate the transformer if it has been damaged in any way.
• Ensure the transformer is installed in a location that is protected from direct water exposure, although the unit is rated IP65 for dust and water jet protection.
• Пераканайцеся, што пастаўка voltage matches the transformer's specified input voltagе (100-240 В пераменнага току, 50/60 Гц).
• Do not exceed the maximum output power of 120 Watts.

3. Змесціва ўпакоўкі

Please verify that all items listed below are present and undamaged in your package:

• 1 x PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120)
• 1 x PAL PCZ-2 Color Touch 2 Zone Remote Control
• 2 батарэйкі тыпу AAA (для пульта дыстанцыйнага кіравання)

Image: The PAL 120W Multi Color Dual Zone Remote Control Transformer, its accompanying PCZ-2 remote control, and two AAA batteries. The transformer is a dark grey rectangular unit with connection ports on one side, and the remote is shown in its packaging next to it.

4. Прадукт скончыўсяview

4.1. Transformer Unit (64-PCR-3D-120)

The main transformer unit is a robust, weather-resistant enclosure designed for outdoor or indoor installation. It converts standard AC line voltage to 24V DC, suitable for PAL LED lighting products. Key features include:

• Уваходны кнtage: 100-240 В пераменнага току, 50/60 Гц
• Харчаванне: 125 ват
• Выходная магутнасць: 120 Watts (24V DC)
• Рэйтынг IP: IP65 (пыланепранікальнасць і абарона ад струменяў вады)
• Сертыфікаты: CE, SELV

4.2. PCZ-2 Color Touch 2 Zone Remote Control

The PCZ-2 remote control allows for intuitive management of your connected LED lighting. It features a color touch wheel for precise color selection and dedicated buttons for controlling two independent lighting zones, brightness, and various lighting modes.

5. Настройка і ўстаноўка

Before beginning installation, ensure all power is disconnected at the main circuit breaker.

1. Мантаж: Select a suitable, secure location for the transformer. Mount the unit vertically using appropriate fasteners, ensuring adequate ventilation around the enclosure.
2. Уваходная праводка: Connect the AC input power (100-240V AC) to the designated input terminals on the transformer. Ensure proper polarity (Live, Neutral, Ground) as indicated on the unit. Use appropriate gauge wiring for the power requirements.
3. Выходная праводка: Connect your 24V DC PAL LED lighting fixtures to the output terminals. The transformer supports two independent zones. Ensure correct polarity (+ and -) for each lighting fixture. Refer to your lighting fixture's manual for specific wiring diagrams.
4. Батарэі пульта дыстанцыйнага кіравання: Open the battery compartment on the PCZ-2 remote control and insert the two AAA batteries, observing the correct polarity.
5. Уключэнне: Once all connections are secure and verified, restore power at the circuit breaker.

6. Інструкцыя па эксплуатацыі

6.1. Спалучэнне пульта дыстанцыйнага кіравання

The PCZ-2 remote control should be pre-paired with the transformer. If pairing is lost or a new remote is introduced:

1. Ensure the transformer is powered on.
2. Within 5 seconds of powering on the transformer, press and hold the 'Zone 1 ON' button on the remote control for approximately 3 seconds. The connected lights should flash to confirm successful pairing.
3. Repeat for 'Zone 2 ON' button if you wish to pair the second zone.

6.2. Basic Remote Functions

• Уключэнне/выключэнне харчавання: Press the 'ON' or 'OFF' buttons for each zone to toggle power.
• Выбар колеру: Use the color touch wheel to select desired static colors.
• Кантроль яркасці: Use the brightness up/down buttons to adjust the intensity of the selected color or mode.
• Выбар рэжыму: Cycle through pre-programmed lighting modes (e.g., color changing, fading) using the 'Mode' button.
• Кантроль зоны: Independently control Zone 1 and Zone 2 using their respective buttons.

7. Тэхнічнае абслугоўванне

• Уборка: Periodically clean the exterior of the transformer and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• агляд: Regularly inspect wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
• Замена батарэі: Replace the AAA batteries in the remote control when its performance degrades or it stops responding.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official PAL Lighting website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PAL Lighting customer service directly. Contact information can typically be found on the manufacturer's webсайт або ўпакоўка прадукту.