Кіраўніцтва карыстальніка беспілотніка SwellPro FD3 Fisherman

1. Уводзіны

This manual provides essential instructions for the safe operation, setup, and maintenance of your SwellPro FD3 Fisherman Waterproof Fishing Drone. The FD3 is designed for marine environments, featuring IP67 waterproofing, a 4K camera, and a dual bait release mechanism for fishing applications. Please read this manual thoroughly before operating the drone to ensure proper use and to prevent damage or injury.

Інструкцыі па бяспецы

• Заўсёды кіруйце дронам на адкрытай прасторы, далей ад людзей, жывёл і перашкод.
• Падчас працы трымайцеся на бяспечнай адлегласці ад дрона.
• Do not operate the drone in strong winds, heavy rain, or lightning.
• Перад кожным палётам пераканайцеся, што ўсе акумулятары цалкам зараджаныя.
• Regularly inspect the drone for any damage before and after use.
• Adhere to all local regulations and laws regarding drone operation.

2. Змесціва ўпакоўкі

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact SwellPro support.

Малюнак 2.1: The SwellPro FD3 Fisherman drone shown with its primary accessories, including the remote control, flight battery, charger, and bait release mechanism.

• SwellPro FD3 Fisherman Drone (x1)
• Пульт дыстанцыйнага кіравання (x1)
• Intelligent Flight Battery (x1)
• Зарадная прылада (x1)
• Propellers (sets)
• Dual Bait Release Mechanism (x1)
• Кіраўніцтва карыстальніка (гэты дакумент)
• Other accessories (e.g., cables, tools)

3. Настройка

3.1 Зборка беспілотніка

1. Прымацаваць прапелеры: Carefully attach the propellers to the motor shafts. Ensure correct propeller type (CW/CCW) matches the corresponding motor. Tighten securely.
2. Install Flight Battery: Insert the intelligent flight battery into the drone's battery compartment until it clicks into place.
3. Attach Bait Release Mechanism: Secure the dual bait release mechanism to the drone's underside according to the provided diagrams. Ensure it is firmly attached and cables are connected.
4. Усталяваць камеру: Mount the 4K camera onto its designated gimbal or mounting point, ensuring all connections are secure.

Малюнак 3.1: Зверху ўніз view of the SwellPro FD3 drone, illustrating the propeller and motor configuration. Ensure propellers are correctly installed for safe flight.

3.2 Зарадка акумулятара

Charge both the intelligent flight battery and the remote controller battery before first use and after each flight.

• Падключыце зарадная прылада да электрычнай разеткі.
• Connect the flight battery to the charger. The indicator light will show charging status.
• Connect the remote controller to its charger (usually via USB).
• Charge until all indicator lights show a full charge.

3.3 Налада дыстанцыйнага кіравання

Малюнак 3.2: The SwellPro FD3 drone positioned next to its remote control, which features a built-in display for real-time flight data and camera feed.

Power on the remote controller. If it does not automatically connect to the drone, follow the binding procedure outlined in the quick start guide or the full manual (if available separately) to establish a connection.

3.4 Усталёўка праграмы (неабавязкова)

For advanced features and real-time telemetry, download the official SwellPro app from your device's app store. Follow the in-app instructions to connect your drone and remote controller.

4. Кіраванне дронам

4.1 Перадпалётны кантрольны спіс

• Пераканайцеся, што ўсе батарэі (дрона і пульта дыстанцыйнага кіравання) цалкам зараджаныя.
• Праверце прапелеры на наяўнасць пашкоджанняў і пераканайцеся, што яны надзейна замацаваны.
• Verify the bait release mechanism and camera are properly installed.
• Check the weather conditions (wind speed, rain).
• Ensure sufficient GPS signal (if operating in GPS mode).
• Clear the flight area of any obstacles, people, or animals.

Малюнак 4.1: The SwellPro FD3 drone in flight over water, demonstrating its waterproof capabilities. Always perform a pre-flight check before launching.

4.2 Асноўныя элементы кіравання палётам

Refer to the remote controller diagram (usually found in the quick start guide) for specific stick and button functions. Common controls include:

• Левы джойсцік: Throttle (up/down), Yaw (rotate left/right)
• Правы джойсцік: Pitch (forward/backward), Roll (left/right)
• Кнопка вяртання дадому (RTH): Initiates automatic return to the takeoff point.
• Bait Release Button: Activates the bait release mechanism.
• Элементы кіравання камерай: Buttons for photo capture and video recording.

4.3 Bait Release Operation

1. Securely attach your fishing line with bait to the dual bait release mechanism. Ensure the weight does not exceed the drone's maximum payload capacity (4.4 lbs).
2. Fly the drone to your desired casting location.
3. Once in position, press the dedicated bait release button on the remote controller. The mechanism will open, dropping the bait.
4. Confirm the bait has been released via the camera feed or visual observation.

4.4 4K Camera Operation

• Ensure a compatible microSD card is inserted into the camera.
• Use the dedicated buttons on the remote controller to start/stop video recording or take photos.
• The live video feed will be displayed on the remote controller's screen or connected mobile device.

4.5 Auto Drop & Return

The FD3 features intelligent flight functions:

• Auto Drop: This refers to the automated bait release function, triggered by the remote controller.
• Return-to-Home (RTH): When activated, the drone will automatically fly back to its recorded takeoff point and land. This feature is also triggered automatically if the battery level is critically low or if the control signal is lost.

5. Тэхнічнае абслугоўванне

5.1 Ачыстка

• After use, especially in saltwater environments, rinse the drone thoroughly with fresh water.
• Wipe the drone dry with a soft cloth. Ensure all ports and connectors are free of moisture before charging or storing.
• Clean the camera lens with a microfiber cloth.

5.2 Захоўванне

• Store the drone and batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, discharge batteries to approximately 50-60% capacity.
• Remove propellers if storing in a compact case.

5.3 Сыход за акумулятарам

• Не перазараджайце і не разраджайце акумулятары.
• If a battery appears swollen or damaged, discontinue use immediately and dispose of it properly.
• Avoid puncturing or exposing batteries to extreme heat.

6. Выпраўленне непаладак

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For warranty information, please refer to the warranty card included with your product or visit the official SwellPro website. For technical support, troubleshooting assistance, or spare parts, please contact SwellPro customer service.

SwellPro Official Webсайт: www.swellpro.com

Крама Amazon: Visit the SwellPRO Store on Amazon