1. Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. Змесціва ўпакоўкі
Калі ласка, пераканайцеся, што ўсе прадметы прысутнічаюць у вашай упакоўцы:
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- Тэрмапракладка
- Кіраўніцтва карыстальніка (гэты дакумент)
3. Тэхнічныя характарыстыкі
| Асаблівасць | Апісанне |
|---|---|
| мадэль | M.2 SATA/NVME Enclosure |
| Інтэрфейс | USB 3.2 Gen 2 Type-C |
| Хуткасць перадачы даных | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| Supported SSD Types | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| Падтрымліваюцца памеры SSD | 2230, 2242, 2260, 2280 |
| Максімальная ёмістасць | 4 ТБ |
| Набор мікрасхем | RTL9210B (Supports UASP, Trim) |
| Матэрыял | Алюмініевы сплаў |
| Памеры | Прыкладна 4.92 х 2.83 х 0.67 цалі |
| Вага | Прыблізна 60 грам (2.12 унцыі) |
| Сумяшчальнасць з АС | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| Сумяшчальнасць прылад | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. Кіраўніцтва па наладцы
Ўстаноўка SSD 4.1
Выканайце наступныя дзеянні, каб усталяваць цвёрдацельны назапашвальнік M.2 у корпус:
- Адкрыйце корпус: Push the switch on the side of the enclosure and slide out the inner frame.
- Устаўце SSD: Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- Бяспечны SSD-дыск: Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- Нанесці цеплавую пракладку: Place the thermal pad onto the SSD chips to aid in heat dissipation.
- Зачыніць корпус: Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.
4.2 Падключэнне да прылады
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.
Заўвага: For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. Інструкцыя па эксплуатацыі
5.1 Перадача дадзеных
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop fileабо выкарыстоўвайце сістэмныя file management tools to transfer data.
- NVMe SSD: Supports transfer rates up to 10Gbps.
- Цвёрдацельны дыск SATA: Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.
5.2 SSD Compatibility
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- Памеры: 2230, 2242, 2260, and 2280 form factors.
6. Тэхнічнае абслугоўванне
6.1 Цеплааддача
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.
6.2 Ачыстка
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7. Выпраўленне непаладак
- Enclosure not detected:
- Пераканайцеся, што SSD-назапашвальнік правільна ўсталяваны і замацаваны ў корпусе.
- Try connecting the enclosure to a different USB port on your device.
- Праверце з іншым USB-кабелем, калі ён ёсць.
- Verify that the SSD itself is functional by testing it in another compatible device if possible.
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- Павольная хуткасць перадачы дадзеных:
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- Close other applications that might be consuming system resources or disk I/O.
- Check the health of your SSD.
- Enclosure gets hot:
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8. Афіцыйныя відэа пра прадукт
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. Інфармацыя аб гарантыі
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. Падтрымка
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official webсайце або на ўпакоўцы прадукту.