Кіраўніцтва карыстальніка 3D-прынтара Creality Ender 3

1. Уводзіны

Welcome to the user manual for your Creality Ender 3 3D Printer. This guide provides essential information for assembling, operating, maintaining, and troubleshooting your printer. The Ender 3 is designed for high-precision Fused Deposition Modeling (FDM) 3D printing, offering a build volume of 220 x 220 x 250mm. It supports various filament types, including PLA, ABS, TPU, wood, and copper.

The Ender 3 features a resume printing function, allowing prints to continue after power outages, and a magnetic self-adhesive platform for easy model creation.

Выява: 3D-прынтар Creality Ender 3, дэманстрацыяasing its compact design and build area.

2. Інфармацыя па бяспецы

• Заўсёды выкарыстоўвайце прынтар у добра вентыляваным памяшканні.
• Keep the printer away from flammable materials and direct heat sources.
• Do not touch the hot nozzle or heated bed during operation or immediately after.
• Ensure the power supply is correctly set to your local voltage (115V or 230V) before plugging in.
• Захоўваць у месцах, недаступных дзецям і хатнім жывёлам.
• Use only recommended filaments and parts.

Image: Before and after setting the power supply voltage switch. Ensure the correct voltage абраны для вашага рэгіёну.

Image: Location of the power supply switch on the right profile of the printer. Adjust before first use.

3. Змесціва ўпакоўкі

Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе кампаненты наяўныя і не пашкоджаныя.

Выява: Падрабязны view of the Creality Ender 3 3D printer components and tools included in the package, laid out for assembly.

Выява: Падрабязная view of various assembly parts and tools provided with the Ender 3, including wrenches, screwdrivers, and small components.

Пакет звычайна ўключае:

• Printer frame components (base, gantry, Z-axis assembly)
• Hotend and extruder assembly
• Heated print bed with magnetic surface
• Control screen and knob
• Блок харчавання
• Трымальнік ніткі
• Tools for assembly (wrenches, screwdrivers, Allen keys)
• Sample filament
• SD card and USB card reader
• Spatula and pliers

4. Інструкцыя па зборцы

The Creality Ender 3 is designed for DIY assembly, which typically takes around 2 hours. Follow these general steps for assembly. Refer to the detailed assembly guide provided with your printer for specific instructions.

1. База зборкі: Secure the vertical frame components to the base.
2. Gantry Installation: Attach the horizontal gantry (X-axis) to the vertical frames.
3. Hotend and Extruder: Mount the hotend and extruder assembly onto the X-axis carriage.
4. Праводка: Connect all motors, endstops, hotend, heated bed, and control screen to the mainboard. Ensure all connections are secure.
5. Трымальнік ніткі: Install the filament holder on top of the frame.
6. крыніца харчавання: Падключыце блок харчавання.

Заўвага: Звярніце ўвагу на магутнасць блока харчаванняtage switch. Ensure it matches your local power grid (115V for North America, 230V for Europe and most other regions) before plugging in the printer.

5. Пачатковая налада

5.1. Выраўноўванне ложка

Proper bed leveling is crucial for successful prints. The Ender 3 features large hand-twist nuts for easier bed leveling.

Image: Illustration of the bed leveling process using the large hand-twist nuts located under the print platform.

1. Heat the bed to your desired printing temperature (e.g., 60°C for PLA).
2. Disable steppers from the control panel.
3. Move the hotend to each of the four corners of the bed.
4. Use a piece of paper between the nozzle and the bed. Adjust the leveling nuts until you feel slight resistance when moving the paper.
5. Repeat for all four corners multiple times until the bed is consistently leveled.

5.2. Ўстаноўка праграмнага забеспячэння

The Ender 3 is compatible with various slicing software, such as Creality Print, Cura, or PrusaSlicer. Install your preferred software on a personal computer (compatible with Windows XP and newer operating systems).

Нарэзка: Use the software to convert your 3D models (e.g., OBJ format) into G-code, which the printer understands.

6. Інструкцыя па эксплуатацыі

6.1. Загрузка ніткі

1. Змесціце шпульку з ніткай на трымальнік для ніткі.
2. Feed the filament through the filament sensor (if present) and into the extruder.
3. Heat the hotend to the appropriate temperature for your filament (e.g., 200°C for PLA).
4. Press the extruder lever and push the filament through the hotend until it extrudes smoothly from the nozzle.

6.2. Пачатак друку

1. Save your sliced G-code file на прадастаўленую SD-карту.
2. Устаўце SD-карту ў слот для SD-карты прынтара.
3. Navigate the printer's menu to "Print from SD" and select your file.
4. The printer will begin heating the bed and nozzle, then start the print.

6.3. Функцыя аднаўлення друку

The Ender 3 features a resume printing function. In case of a power outage or accidental disconnection, the printer can resume the print from where it left off once power is restored.

Image: An illustration demonstrating the resume printing function, showing how a print can continue from its last point after a power interruption.

7. Тэхнічнае абслугоўванне

• Ачысціце сопла: Regularly clean the nozzle to prevent clogs.
• Ачыстка друкавальнай падстаўкі: Wipe the print bed with isopropyl alcohol before each print for optimal adhesion.
• Змазка рухомых частак: Periodically lubricate the Z-axis lead screw and other moving parts.
• Праверце рамяні: Ensure the X and Y axis belts are properly tensioned.
• Абнаўленні прашыўкі: Праверце вытворцы webсайт для атрымання даступных абнаўленняў прашыўкі.

8. Выпраўленне непаладак

8.1. Распаўсюджаныя праблемы

9. Тэхнічныя характарыстыкі

Image: Diagram showing the dimensions of the Creality Ender 3 3D Printer.

10. Гарантыя і падтрымка

This product comes with a manufacturer's warranty of 1 year. For technical support, troubleshooting assistance, or warranty claims, please contact Comgrow customer service.

For further information and resources, you may visit the official Comgrow brand store: Крама Comgrow.

Image: The official Comgrow brand logo.