Інструкцыя па эксплуатацыі люстры Milagro LUXURIA 9xE14

1. Уводзіны

Thank you for choosing the Milagro LUXURIA 9xE14 Chandelier. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.

Image 1.1: The Milagro LUXURIA 9xE14 Chandelier, showcasing its gold-finished frame and multi-faceted crystal elements.

2. Інфармацыя па бяспецы

• Электрабяспека: Always disconnect the main power supply at the circuit breaker before installing, cleaning, or performing any maintenance on the fixture.
• Прафесійная ўстаноўка: Installation should be performed by a qualified electrician in accordance with all local electrical codes and regulations.
• Далікатныя кампаненты: Handle crystal elements with care to prevent breakage.
• Тып лямпы: Выкарыстоўвайце толькі лямпачкі з цокалем E14. Не перавышайце максімальную магутнасць.tage, указаны для свяцільні.
• Рэйтынг IP20: This fixture is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is suitable for indoor use only in dry locations. Do not install in bathrooms or areas exposed to moisture.
• Вентыляцыя: Забяспечце дастатковую вентыляцыю вакол прыбора, каб прадухіліць перагрэў.

3. Змесціва ўпакоўкі

Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.

• Chandelier main body (gold-finished metal frame with pre-installed wiring)
• Crystal elements (various shapes and sizes)
• Потолочная плафон і мантажны кранштэйн
• Мантажныя элементы (шрубы, анкеры, злучальнікі для правадоў)
• Кіраўніцтва па эксплуатацыі

Заўвага: Light bulbs (E14 type) are not included and must be purchased separately.

4. Настройка і ўстаноўка

Follow these steps carefully for proper installation.

1. Падрыхтоўка да ўстаноўкі:
   • Turn off the electrical power at the main circuit breaker or fuse box.
   • Ensure the mounting surface is structurally sound and can support the weight of the chandelier (approximately 8.9 kg).
   • Падрыхтуйце неабходныя інструменты: адвёртку, інструменты для зачысткі правадоў, ізаляцыйную стужку, лесвіцу.
2. Усталюйце мантажны кранштэйн:
   • Прымацуйце мантажны кранштэйн да размеркавальнай скрынкі ў столі з дапамогай прадугледжаных шруб. Пераканайцеся, што ён надзейна замацаваны.
3. Падключэнне правадоў:
   • Carefully connect the fixture's wires to the house wiring. Typically, connect the black wire from the fixture to the black (live) wire from the ceiling, the white wire from the fixture to the white (neutral) wire from the ceiling, and the ground wire from the fixture to the bare copper (ground) wire from the ceiling.
   • Secure connections with wire nuts and electrical tape.
4. Mount the Chandelier Body:
   • Carefully lift the chandelier body and attach it to the mounting bracket, securing it with the canopy screws.
5. Attach Crystal Elements:
   • Following the diagram or pre-drilled holes, carefully attach each crystal element to the chandelier frame. Ensure they are securely fastened.
6. Усталяваць лямпачкі:
   • Screw nine E14 base bulbs into the sockets. Do not overtighten.
7. Аднавіць сілу:
   • Once installation is complete, restore power at the circuit breaker and test the fixture.

Image 4.1: Dimensional drawing of the Milagro LUXURIA 9xE14 Chandelier, showing a diameter of 500mm and a total height of 1000mm, with the main crystal section being 150mm high.

5. Інструкцыя па эксплуатацыі

The Milagro LUXURIA 9xE14 Chandelier operates via a standard wall switch connected to its electrical circuit. There are no integrated controls on the fixture itself.

• Уключэнне/выключэнне: Use the wall switch to turn the chandelier on or off.
• Замена лямпачкі: To replace a bulb, ensure the power is off at the circuit breaker. Allow bulbs to cool completely before touching. Unscrew the old bulb and screw in a new E14 bulb of the appropriate wattage.

6. Тэхнічнае абслугоўванне

Рэгулярны догляд дапаможа захаваць знешні выгляд і функцыянальнасць вашай люстры.

• Уборка: Disconnect power before cleaning. Dust the metal frame and crystal elements regularly with a soft, dry, lint-free cloth. For more thorough cleaning of crystals, use a mild glass cleaner applied to a cloth, then gently wipe the crystals. Do not spray cleaner directly onto the fixture.
• Пазбягайце рэзкіх хімічных рэчываў: Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish of the metal or the clarity of the crystals.
• Перыядычная праверка: Перыядычна правярайце ўсе злучэнні і мацавальныя элементы, каб пераканацца ў іх надзейнасці.

7. Выпраўленне непаладак

Калі ў вас узніклі праблемы з люстрай, звярніцеся да наступных распаўсюджаных праблем і рашэнняў:

If troubleshooting steps do not resolve the issue, please contact a qualified electrician or the product retailer for assistance.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Milagro products are designed for quality and durability.

If you require further assistance or have questions not covered in this manual, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase.