XCQQ-S8R Round Bidet Toilet Seat User Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your XCQQ-S8R Round Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Інфармацыя па бяспецы

Observe all safety precautions to prevent injury or damage to the product. This electric bidet is equipped with built-in detection sensors that monitor water temperature, seat temperature, water pressure, and drying level in real-time. In the event of an abnormal situation, the unit will stop working automatically to enhance safety.

• Пераканайцеся, што разетка адпавядае зададзенаму напружаннюtage (120 Volts) and has a ground plug.
• Не апускайце прыладу ў ваду і не распыляйце ваду непасрэдна на электрычныя кампаненты.
• Always turn off the water supply and unplug the unit before performing any maintenance or cleaning.
• Трымайце дзяцей далей ад прылады падчас працы.

3. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Bidet toilet seat
• 3-way valve + DMT pipe (Pre-Installed)
• Мацавальная пласціна
• Mounting hardware (rubber expansion nuts, metal adjustment sheets, screws)
• Інструкцыя па эксплуатацыі (гэты дакумент)

4. Тэхнічныя характарыстыкі прадукту

5. Кіраўніцтва па ўстаноўцы

Before installation, ensure your toilet is compatible with a round bidet seat and that a grounded electrical outlet is available nearby. Refer to the toilet size diagram below to confirm compatibility.

Image: Toilet size compatibility guide for round and elongated seats, indicating an outlet is required.

Праверка перад устаноўкай:

• Ensure the water supply valve is turned off before starting.
• Пераканайцеся, што ўсе кампаненты пакета наяўныя.

Этапы ўстаноўкі:

1. Insert Expanding Rubber Bolts: Insert the expanding rubber bolts into the toilet holes.
   

   Image: Rubber bolts placed into the toilet seat mounting holes.
2. Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
   

   Image: A hand releasing the fixing plate from the bidet seat.

3. Secure Fixing Plate: Press the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate to the toilet.
   

   Image: Securing the fixing plate to the toilet using screws.

4. Прымацаваць сядзенне для бідэ: Push the bidet unit onto the fixing plate while holding down the buckle until the plate slides into the bottom of the unit completely.
   

   Image: Attaching the bidet seat to the fixing plate.
5. Падключэнне водазабеспячэння: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the DMT pipe and filter as shown in the video.
   

   Image: Components for water connection, including the 3-way valve and DMT pipe.

6. Адкрытае водазабеспячэнне: Once all connections are secure, slowly open the water supply valve. Wait 3-5 minutes for the bidet to fill with water.
7. Падключыць: After the bidet has filled with water, plug the power cord into a grounded electrical outlet.

Відэакіраўніцтва па ўсталёўцы:

Важная заўвага:

When the power is activated, the LED light will start to blink, and the spray bar will automatically extend (without spray) and water will flow down the bar into the toilet. This is the unit performing a water spray check. The blue light will stop blinking in 1 minute automatically.

If the LED light blinks continuously for more than 5 minutes, unplug the bidet and turn off the water valve. Turn on the water valve first, wait 3-5 minutes, then plug it in and do not operate any functions. The blue light will stop blinking in 1 minute automatically.

6. Кіраўніцтва па эксплуатацыі

The XCQQ-S8R bidet toilet seat features an integrated side control panel and an LED display for easy operation. The unit will remember your customized settings for water pressure, temperature, nozzle position, and heated seat temperature after each adjustment (re-memory required after power outagе).

Панэль кіравання скончыласяview:

Image: Side control panel with buttons for various bidet functions.

• Спрэй: Activates posterior wash.
• Bidet: Activates feminine wash.
• Турбамыйка: Provides a stronger wash.
• Сушка: Актывуе асушвальнік цёплым паветрам.
• Аўто: Initiates an automatic wash and dry cycle.
• Святло: Controls the night light feature.
• Тэмпература вады: Adjusts water temperature (5 settings, room temp to 102℉).
• Тэмпература сядзення: Adjusts heated seat temperature (4 settings, room temp to 102℉).
• Палажэнне фарсункі: Adjusts the spray nozzle's position.
• Stop: Halts all active functions.

Асноўныя характарыстыкі:

Сядзенне ўнітаза з падагрэвам

Image: The bidet seat with a visible warm glow, illustrating the heated seat feature.

Enjoy comfort with 4 adjustable heating levels for the seat, from room temperature up to 102℉.

Сушка цёплым паветрам

Image: The bidet seat's warm air dryer in action, showing air currents.

An efficient air drying system with 5 adjustable temperature settings provides a hands-free experience.

Мяккае закрыццё вечка

Image: The soft-close lid mechanism, preventing loud noises.

The soft damper closing design ensures the lid closes quietly and gently.

Toilet LED Night Light

Image: The bidet's LED night light illuminating the toilet bowl.

Equipped with LED night lights and a beep-off mode to avoid disturbing others at night.

Адлюстраванне дадзеных у рэжыме рэальнага часу

Image: The LED display showing real-time data.

The LED screen displays the status of the unit in real-time, including water temperature, seat temperature, and drying temperature.

Multiple Cleaning Styles

Image: Illustrations of various cleaning modes and the stainless steel nozzle.

Features include Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self Cleaning for comprehensive hygiene.

Відэакіраўніцтва па эксплуатацыі:

7. Тэхнічнае абслугоўванне

Рэгулярная чыстка і абслугоўванне забяспечаць даўгавечнасць і аптымальную працу вашага ўнітаза-бідэ.

• Ачыстка сопла: The bidet features a self-cleaning nozzle. For additional cleaning, gently wipe the nozzle with a soft cloth and mild, non-abrasive cleaner.
• Знешняя ачыстка: Працярыце вонкавыя паверхні сядзення бідэ мяккай губкайamp cloth. Avoid using harsh chemicals, abrasive cleaners, or brushes that could scratch the surface.
• Абслугоўванне фільтраў: The DMT pipe includes a filter. Periodically check the filter for debris and clean or replace it as necessary to maintain water flow and quality.
• Адключэнне сілкавання: Always unplug the unit from the electrical outlet and turn off the water supply before performing any deep cleaning or maintenance.

8. Выпраўленне непаладак

If you encounter issues with your XCQQ-S8R bidet toilet seat, refer to the following common solutions:

Калі праблема не знікне пасля спробы гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў.

9. Гарантыя і падтрымка

For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official XCQQ website. Our customer service team is available to assist you with any questions or concerns regarding your bidet toilet seat.

вытворца: XCQQ

Webсайт: XCQQ Official Store on Amazon