SANUS OLF22 Full-Motion TV Wall Mount and HTBS Adjustable Height Speaker Stands Instruction Manual

Уводзіны

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your SANUS OLF22 Premium Full-Motion TV Wall Mount and HTBS Adjustable Height Satellite Speaker Stands. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact SANUS Customer Care.

Не ўсталёўвайце гэты выраб на сцены, якія не маюць трывалай канструкцыі.
Ensure the mounting surface can support the combined weight of the mount and the TV.
Always use a stud finder to locate wood studs or consult a qualified professional for concrete/masonry installations.
Do not exceed the maximum weight capacity of 150 lbs (68 kg) for the TV mount.
Не дапускайце дзяцей падчас мантажу.

Змест пакета

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact SANUS Customer Care.

TV Wall Mount Components (OLF22)

Зборка насценнай пласціны
Кронштейны для тэлевізара
Мантажныя прыналежнасці (розныя шрубы, шайбы, распоркі)
Кабельныя сцяжкі

Speaker Stand Components (HTBS)

Базавыя пліты
Adjustable Height Poles
Speaker Platforms/Mounting Adapters
Зборачнае абсталяванне

Настройка і ўстаноўка

TV Wall Mount (OLF22) Installation

Падрыхтуйце сцяну: Locate wall studs using a stud finder. Mark the desired height and center of your TV on the wall. Ensure the area is free of electrical wires or plumbing.
Прымацаваць насценную пласціну: Position the wall plate assembly at the marked location. Use a level to ensure it is straight. Secure the wall plate to two adjacent wood studs using the provided lag bolts. For concrete or masonry walls, use appropriate anchors (sold separately) and consult a professional.
Прымацуйце кранштэйны для тэлевізара: Secure the TV bracket arms to the back of your television using the appropriate screws, washers, and spacers from the included hardware kit. Ensure the brackets are centered and level on the TV.
Мацаванне тэлевізара на насценную кранштэйну: Carefully lift the TV with the attached brackets and hook them onto the wall plate assembly. Secure the TV to the mount using the safety screws or locking mechanisms provided.
Кабельнае кіраванне: Use the included cable management ties to route and secure cables along the mount arms, preventing tangles and ensuring a clean appearance.

Image: Man adjusting a TV mounted on a SANUS full-motion wall mount, demonstrating smooth extension and tool-free adjustments.

Image: Close-up of the SANUS TV wall mount showing cables neatly managed with ties along the articulating arms.

Adjustable Height Speaker Stands (HTBS) Assembly

Прымацуеце слуп да асновы: Secure the lower adjustable pole to the base plate using the provided screws.
Падключыце платформу дынамікаў: Connect the speaker platform or mounting adapter to the top of the upper adjustable pole.
Адрэгуляваць вышыню: Insert the upper pole into the lower pole. Adjust the height between 28 inches and 38 inches to your desired listening level. Secure the height adjustment mechanism.
Мацаванне дынамікаў: Place your satellite or small bookshelf speakers onto the platforms or attach them using the appropriate adapters for your speaker model.

Image: Components of the SANUS speaker stand laid out for easy 3-step assembly, including base, poles, and various speaker mounting hardware.

Інструкцыя па эксплуатацыі

Adjusting the TV Wall Mount

Пашырэнне: Gently pull the TV screen forward to extend the mount up to 22 inches from the wall.
Паваротны: Pivot the TV left or right up to 70 degrees for optimal viewз розных бакоў.
Нахіл: Adjust the vertical angle of the TV screen (up or down) to reduce glare or achieve a preferred viewing angle. The OLF22 features tool-free tilt adjustments.
Адкліканне: Push the TV gently back towards the wall until it rests at its slim profile of 2.5 inches from the wall.

Накладныя выдаткі view of a TV mounted on a SANUS full-motion mount, demonstrating its ability to swivel up to 70 degrees.

Выява: Над галавой view of a TV mounted on a SANUS full-motion mount, demonstrating its ability to swivel up to 70 degrees.

Выява: Збоку view of a TV mounted on a SANUS wall mount, showing it extended 22 inches from the wall and its slim 2.5-inch retracted depth.

Adjusting Speaker Stand Height

To adjust the height of the speaker stands, loosen the locking mechanism on the adjustable pole.
Slide the upper pole to the desired height between 28 and 38 inches.
Tighten the locking mechanism securely to prevent the pole from slipping.

Close-up of a SANUS speaker stand showing the tool-free height adjustment mechanism, with an arrow indicating adjustment range from 28 to 38 inches.

Image: Close-up of a SANUS speaker stand showing the tool-free height adjustment mechanism, with an arrow indicating adjustment range from 28 to 38 inches.

Image: Two SANUS adjustable height speaker stands positioned in a living room setup with a TV and soundbar, demonstrating their use.

Тэхнічнае абслугоўванне

Уборка: Wipe the mount and stands with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Перыядычныя праверкі: Перыядычна правярайце ўсе шрубы і балты, каб пераканацца, што яны надзейна закручаныя. Пры неабходнасці падцягвайце.
Рух: If the TV mount movement becomes stiff, apply a small amount of silicone-based lubricant to the articulating joints.

Ліквідацыю непаладак

TV Wall Mount Issues

Тэлевізар не параўноўваецца з роўным становішчам: Check the wall plate and TV bracket arms for levelness. Adjust as needed. Some mounts have post-installation leveling adjustments.
Мацаванне адчуваецца свабодным: Ensure all wall mounting bolts and TV attachment screws are securely tightened. Do not overtighten.
Difficulty moving TV: Check for any obstructions. Ensure cables are not caught in the articulating arms. If movement is stiff, apply lubricant as per maintenance instructions.

Speaker Stand Issues

Stands are wobbly: Ensure all assembly screws are tightened. Check that the base is on a flat, stable surface.
Height adjustment slips: Ensure the height locking mechanism is fully engaged and tightened.

Тэхнічныя характарыстыкі