JUJIANG PKM-C026 Automatic Dual Swing Gate Opener and Electric Lock User Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your JUJIANG PKM-C026 Automatic Dual Swing Gate Opener with the included DS-02 Electric Gate Lock. This system is designed for medium-duty dual swing gates, supporting up to 770 lbs (350 kg) per arm or 16 feet (4.8 meters) in length per leaf. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

2. Інфармацыя па бяспецы

Always prioritize safety during installation and operation. Failure to follow these instructions may result in serious injury or property damage.

• Пераканайцеся, што ўсе электрычныя падключэнні выкананы кваліфікаваным спецыялістам і адпавядаюць мясцовым нормам.
• Keep children and pets away from the gate area, especially during operation.
• Do not attempt to repair the gate opener or electric lock yourself. Contact qualified service personnel.
• Regularly inspect the gate and opener for signs of wear, damage, or misalignment.
• Use the manual release key only when the gate is stationary and power is disconnected or during a power outage.

3. Змесціва ўпакоўкі

Праверце, ці ёсць у вашай упакоўцы ўсе пералічаныя ніжэй кампаненты:

• 2 x Gate Opener Arms (Actuators)
• 1 х блок кіравання
• 1 x DS-02 Electric Gate Lock
• 2 х Пульты дыстанцыйнага кіравання
• 1 x Manual Release Key
• Мантажныя кранштэйны і абсталяванне
• Кіраўніцтва па эксплуатацыі
• Папераджальныя знакі

4. Тэхнічныя характарыстыкі

5. Кіраўніцтва па ўстаноўцы

5.1 Праверкі перад устаноўкай

• Ensure your gate is structurally sound, moves freely, and is properly balanced.
• Clear any obstructions from the gate's path.
• Confirm you have the necessary tools for installation (e.g., drill, wrenches, measuring tape).

5.2 Mounting the Gate Opener Arms

The gate opener arms can be installed in either Push-to-Open or Pull-to-Open configurations, depending on your gate's opening direction. Refer to the installation diagram for proper bracket placement and measurements.

1. Determine the optimal mounting points on your gate post and gate frame for the brackets.
2. Securely attach the mounting brackets using appropriate fasteners for your gate material.
3. Attach the gate opener arms to the installed brackets. Ensure the arms are level and move freely without binding.

5.3 Wiring and Power Supply

The system supports three power supply modes: 110V AC, 24V battery backup, and solar charging. Choose the mode that best suits your needs.

1. Mount the control box in a secure, weather-protected location near the gate.
2. Connect the gate opener arms to the control box according to the wiring diagram provided in the full manual.
3. Connect your chosen power source to the control box. If using battery or solar, ensure proper connections for charging and backup.

5.4 Electric Gate Lock Installation (DS-02)

The DS-02 Electric Gate Lock provides enhanced security and stability, especially for gates longer than 7 feet (1.5 meters).

1. Mount the electric lock to the gate frame and the strike plate to the gate leaf, ensuring proper alignment for secure locking.
2. Connect the lock's wiring to the control box as indicated in the wiring diagram. The lock features an auto-locking/unlocking mechanism triggered by the gate opener.

6. Інструкцыя па эксплуатацыі

6.1 Праца дыстанцыйнага кіравання

Your gate opener comes with two remote controls, capable of operating the gate from up to 100 feet away. The system supports up to 120 remotes.

• Press button '1' on the remote to control motor 1 (typically for a single gate or one leaf of a dual gate).
• Press button '2' on the remote to control both motor 1 and motor 2 (for dual gate operation).
• Refer to the full manual for instructions on programming additional remotes.

6.2 Ручны выпуск

У выпадку ўлады унtage or remote control malfunction, you can manually open or close the gate using the provided manual release key.

1. Insert the manual release key into the lock cylinder on the gate opener arm.
2. Turn the key to disengage the motor, allowing the gate to be moved manually.
3. Remember to re-engage the motor after manual operation by turning the key back and removing it.

7. Тэхнічнае абслугоўванне

Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і надзейную працу вашай сістэмы адчынення варот.

• Штомесяц: Inspect the gate for smooth movement, clear any debris from the gate's path, and check all mounting hardware for tightness.
• Штоквартальна: Lubricate moving parts of the gate and opener arms as recommended in the full manual. Check electrical connections for corrosion or damage.
• Штогод: Have a qualified technician inspect the entire system, including motors, wiring, and safety features.

8. Выпраўленне непаладак

Калі ў вас узніклі праблемы з адчыняльнікам варот, звярніцеся да наступных распаўсюджаных праблем і рашэнняў:

• Брама не рэагуе на пульт: Check remote battery, ensure the gate opener has power, and verify the remote is programmed correctly.
• Gate opens partially or stops: Inspect for obstructions in the gate's path. Check limit switch settings. Ensure the gate moves freely manually.
• Electric lock not engaging/disengaging: Check wiring to the control box and ensure proper alignment of the lock and strike plate.
• Незвычайныя гукі: Inspect for loose hardware, worn parts, or obstructions. Lubricate as necessary.

For more detailed troubleshooting steps, consult the comprehensive manual or contact customer support.

9. Гарантыя і падтрымка

JUJIANG is committed to providing excellent customer service and support for your gate opener system.

• Палітыка вяртання: Enjoy a 30-day worry-free exchange and return policy.
• Гарантыя: Your product is covered by a 12-month warranty from the date of purchase.
• Тэхнічная падтрымка: Lifetime technical assistance is available for any questions or issues you may encounter.

For assistance, please refer to the contact information provided with your product or visit the official JUJIANG webсайт.