Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of your BOBRICK 2013 Stainless Steel Automatic Wall-Mounted Foam Soap Dispenser. Designed for durability and hygiene, this touch-free dispenser offers a reliable solution for various commercial and public restroom environments. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Асаблівасці прадукту
- Трывалая канструкцыя: Manufactured from high-quality stainless steel with a satin finish, designed for long-lasting performance and resistance to wear.
- Бессэнсарнае кіраванне: Features a sensor-activated mechanism for automatic, hygienic soap dispensing, minimizing contact and promoting cleanliness.
- Versatile Soap Compatibility: Equipped with a corrosion-resistant valve capable of dispensing a variety of bulk-fill foam soaps, iodine-based soaps, and alcohol-based liquid or gel hand sanitizers.
- Вялікая ёмістасць: Holds up to 800 ml (27 fl. oz.) of soap, reducing the frequency of refills.
- Эканамічны: Designed to use commonly available bulk foam soap, eliminating the need for expensive proprietary cartridges and offering significant cost savings.
- Бяспечны дызайн: Includes a tumbler lock to prevent tampering and unauthorized access to the soap reservoir.
- Індыкатар папаўнення: A visible window allows for easy monitoring of soap levels.
- Індыкатар разраду батарэі: A flashing blue light signals when batteries are low and require replacement.
Ўстаноўка
The BOBRICK 2013 dispenser is designed for wall-mounted installation. Ensure the mounting surface is sturdy and capable of supporting the dispenser's weight when full. Proper installation is crucial for optimal performance and security.
- Выберыце месцазнаходжанне: Choose a suitable wall location, ensuring adequate clearance above and below the dispenser for refilling and hand access.
- Адзначце кропкі мацавання: Use the provided mounting template (if applicable) or measure and mark the drill points for the mounting screws.
- Свідраваць адтуліны: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material (e.g., masonry bit for tile/concrete, wood bit for studs).
- Бяспечны дыспенсер: Attach the dispenser to the wall using the appropriate screws and anchors. Ensure it is level and securely fastened.
- Ўстаноўка батарэі: Open the dispenser using the provided key. Install 4 x 1.5V Alkaline “AA” cell batteries into the designated compartment.
- Пачатковае запаўненне: Fill the soap reservoir with suitable foam soap. Close and lock the dispenser.
Figure 1: Technical specifications and dimensions for installation.
Аперацыя
The BOBRICK 2013 dispenser operates automatically via an infrared sensor. To dispense soap:
- Position Hands: Place your hands flat beneath the dispenser's sensor area.
- Аўтаматычная дазавання: The sensor will detect your hands and automatically dispense a measured amount of foam soap.
- Светлавы індыкатар: A blue indicator light will illuminate during dispensing, signaling that the unit is in use.
Figure 2: Blue indicator light signals when the dispenser is in use.
Video 1: Demonstrates the automatic dispensing function of the Bobrick Wall-Mounted Foam Soap Dispenser.
Maintenance & Refilling
Рэгулярнае абслугоўванне забяспечвае аптымальную прадукцыйнасць і гігіену.
- Checking Soap Level: Monitor the soap level through the refill indicator window on the front of the dispenser.
- Refilling Soap:
- Unlock the dispenser using the provided key at the top. The front cover will hinge open.
- Carefully remove the empty soap reservoir.
- Fill the reservoir with bulk foam soap. Do not overfill.
- Reinsert the filled reservoir and close the front cover, ensuring it locks securely.
- Замена батарэі: A flashing blue light indicates low battery. Unlock the dispenser, replace the 4 x 1.5V Alkaline “AA” cell batteries, and close the cover.
- Уборка: Wipe the exterior of the stainless steel dispenser with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
Figure 3: Dispenser with hinged housing open for easy refilling.
Figure 4: Important information regarding battery type and low battery indicator.
Video 2: Demonstrates the refilling process for the Bobrick soap dispenser.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Дазатар не актывуецца | Low or dead batteries; Sensor obstructed; No soap in reservoir. | Replace batteries; Clear sensor area; Refill soap reservoir. |
| Soap not dispensing or dispensing inconsistently | Soap reservoir empty; Dispensing mechanism clogged; Incorrect soap type (not foam). | Refill soap; Clean dispensing nozzle; Ensure foam soap is used. |
| Мігае блакітнае святло | Індыкацыя разраду батарэі. | Replace all 4 x AA batteries. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | Б-2013 |
| Матэрыял | Нержавеючая сталь |
| Скончыць | Атласная аздабленне |
| Памеры прадукту (Д х Ш х У) | 5" x 4.72" x 11" (approx. 127mm x 120mm x 279mm) |
| Аб'ём вадкасці | 800 Milliliters (27 fl. oz.) |
| Крыніца харчавання | 4 x 1.5V Alkaline “AA” Cell Batteries |
| Dispensing Type | Automatic Foam |
| Тып мацавання | Насценныя |
Інфармацыя па бяспецы
- Do not submerge the dispenser in water or expose it to excessive moisture.
- Use only the specified battery type (4 x AA Alkaline). Do not mix old and new batteries or different battery types.
- Keep the dispenser out of reach of small children to prevent misuse or injury.
- Ensure the dispenser is securely mounted to prevent it from falling.
- Use only foam soap or compatible sanitizers as specified. Using incorrect liquids may damage the dispensing mechanism.
Гарантыя і падтрымка
Specific warranty details and customer support contact information are typically provided with your purchase documentation. Please refer to the packaging or contact Bobrick customer service for assistance.
