FLEXISPOT E6 MAX

FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk User Manual

Model: E6 MAX | Brand: FLEXISPOT

Уводзіны

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ:

Exceeding the maximum weight recommendation of 352 pounds may cause damage or pose a safety risk. Ensure the desk is not overloaded. Keep children and pets away from the desk during height adjustments to prevent injury due to the anti-collision function.

Змест пакета

Before beginning assembly, verify that all parts are present and undamaged. The package typically includes:

  • Whole-piece Desktop (55"x28" Special Walnut)
  • Desk Frame (Black) with Dual Motors
  • 3-Сtage Lifting Columns (2)
  • Feet/Bases (2)
  • Control Panel with LCD screen and backlit buttons
  • Адаптар сілкавання і кабелі
  • Зборныя элементы (шрубы, шасцігранны ключ)
  • Complimentary Accessories: Velcro Straps, Set of Wheels, Cable Manager
All components of the FlexiSpot E6 MAX standing desk laid out for assembly.

Image: All components of the FlexiSpot E6 MAX standing desk laid out for assembly, including the desktop, frame parts, and accessories.

Інструкцыя па наладзе

Assembly is straightforward and can typically be completed by one person in approximately 30 minutes. A power drill is recommended for some steps, though a hand screwdriver can also be used.

  1. Распакуйце кампаненты: Carefully remove all parts from the two shipping boxes. One box contains the desktop, and the other contains the frame and accessories.
  2. Assemble Support Beams: Connect the three pieces of each support beam by sliding the outer sections together and tightening them securely.
  3. Attach Lifting Columns: Securely attach the lifting columns to the assembled support beams using the provided Allen wrench and screws. Each side requires four screws.
  4. Install Feet/Bases: Screw the feet onto the bottom of the lifting columns using the Allen wrench. Optionally, swap the feet for the included wheels for easier mobility.
  5. Position Desktop: Place the desktop upside down on a clean, soft surface. Carefully align the assembled desk frame onto the pre-drilled holes on the underside of the desktop.
  6. Install Control Box and Keypad: Mount the control box and keypad to the designated areas on the underside of the desktop using screws.
  7. Падключэнне правадоў: Connect all necessary wires from the motors, control panel, and power adapter to the control box. Ensure all connections are secure.
  8. Кабельнае кіраванне: Use the included Velcro straps and cable manager to organize and secure all cables neatly under the desk.
Close-up of the three-stage leg mechanism of the FlexiSpot E6 MAX standing desk.

Image: The three-stage leg mechanism allows for continuous height adjustment, accommodating various user heights.

Complimentary accessories for the FlexiSpot E6 MAX standing desk, including Velcro straps, a set of wheels, and a cable manager.

Image: Included accessories like Velcro straps, wheels, and a cable manager assist in organizing your workspace.

Інструкцыя па эксплуатацыі

Your FLEXISPOT E6 MAX desk features intuitive controls for seamless height adjustment.

Рэгуляванне вышыні

  • The desk adjusts from a minimum height of 24.4 inches to a maximum height of 50 inches.
  • Выкарыстоўвайце Уверх (▲) і Уніз (▼) arrow buttons on the control panel to manually adjust the desk height.

Programmable Memory Settings

The control panel features four programmable memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.

  1. Адрэгулюйце вышыню стала на патрэбную вышыню з дапамогай кнопак «Уверх»/«Уніз».
  2. Націсніце M кнопку. На дысплеі з'явіцца «S-».
  3. Immediately press one of the numbered memory buttons (1, 2, 3, or 4) to save the current height. The display will confirm the setting.
  4. Каб аднавіць захаваную вышыню, проста націсніце адпаведную кнопку памяці з нумарам. Стол аўтаматычна перамясціцца ў гэтае становішча.

Функцыя прадухілення сутыкненняў

The desk is equipped with a sensitivity mode that detects obstacles during height adjustment. If the desk encounters an object, it will automatically stop and reverse slightly to prevent damage or injury.

Close-up of the programmable control panel of the FlexiSpot E6 MAX standing desk with blue backlighting.

Image: The intuitive control panel features an LCD screen, up/down arrows, and four memory settings for quick adjustments.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your standing desk.

  • Уборка: Працярыце працоўны стол і рамку мяккай губкайamp тканінай. Пазбягайце абразіўных ачышчальнікаў або агрэсіўных хімічных рэчываў, якія могуць пашкодзіць пакрыццё.
  • Кабельнае кіраванне: Periodically check and re-secure cables using the provided Velcro straps or cable manager to prevent tangles and damage.
  • Праверка рухавіка: Listen for any unusual noises during operation. If you notice any issues, refer to the troubleshooting section or contact customer support.
  • Размеркаванне вагі: Ensure weight is evenly distributed on the desktop to prevent strain on the motors and frame.

Ліквідацыю непаладак

If you encounter issues with your FLEXISPOT E6 MAX desk, try the following common troubleshooting steps:

  • Стол не рухаецца: Check all power connections. Ensure the power cable is securely plugged into both the desk and the wall outlet.
  • Код памылкі на дысплеі: Refer to the specific error code in the full product manual (not provided here) or contact customer support for guidance.
  • Няроўны рух: Ensure the desk is on a level surface. Check for any obstructions under the desk that might impede movement.
  • Функцыя скіду: If the desk is unresponsive, unplug it from the power outlet for 10-15 seconds, then plug it back in. This may reset the system.

Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
МаркаФЛЕКСІСПОТ
Нумар мадэліE6
Памеры прадукту47.5"D x 27.5"W x 23.6"H (Frame)
Памер працоўнага стала55"x28" Whole-piece
КолерBlack Frame + Special Walnut Top
Базавы матэрыялМетал
Верхні тып матэрыялуКанструяваная драўніна
Пад'ёмны механізмElectric Dual Motor
Колькасць Сtages3 Сtages
Дыяпазон вышыніад 24.4 да 50 цаляў
Максімальная грузападымальнасць330 фунтаў (150 кг)
Узровень шумуМенш за 50 дБ
Патрабуецца зборкаТак (рэкамендуецца 2 чалавекі)
The FlexiSpot E6 MAX standing desk supporting heavy weights, illustrating its 330 lbs load capacity.

Image: The desk's robust construction supports up to 330 lbs, providing a sturdy workstation.

Diagram showing the dimensions of the FlexiSpot E6 MAX desktop and desk frame height ranges.

Image: Detailed dimensions of the desktop (55"x28") and the adjustable height ranges for the desk frame.

Гарантыя

FLEXISPOT offers a comprehensive warranty for your peace of mind:

  • 10-гадовае пакрыццё: Applies to the desk frame and motors.
  • 2-Year Protection: Applies to the control panel and electronics.

For any warranty claims or assistance, please contact FLEXISPOT customer support.

Падтрымка кліентаў

For further assistance, technical support, or inquiries regarding your FLEXISPOT E6 MAX Standing Desk, please contact the manufacturer directly. Refer to the contact information provided with your product packaging or visit the official FLEXISPOT webсайт.

Вы таксама можаце наведаць в FLEXISPOT Store on Amazon для атрымання дадатковай інфармацыі і рэсурсаў падтрымкі.