User Manual: Tire Inflator Portable Air Compressor

Уводзіны

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new Portable Tire Inflator. Please read this manual thoroughly before using the device and retain it for future reference.

Інструкцыі па тэхніцы бяспекі

• Перад выкарыстаннем пераканайцеся, што прылада цалкам зараджана.
• Do not operate the inflator near flammable liquids or gases.
• Захоўваць у месцах, недаступных дзецям.
• Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.
• Avoid continuous operation for extended periods to prevent overheating. Allow the device to cool down if it becomes hot.
• Не разбірайце і не мадыфікуйце прыладу.
• Store in a dry place away from direct sunlight and extreme temperatures.

Змест пакета

• Партатыўны прыбор для накачкі шын
• Інфляцыйная трубка
• USB-кабель для зарадкі
• 4 x Nozzles (for car, bike, ball, swimming ring)

Image: The portable tire inflator unit shown with its included accessories: an inflation hose, a USB charging cable, and four different nozzle adapters for various inflation needs.

Прадукт скончаныview

Азнаёмцеся з кампанентамі вашага помпа для шын:

• Лічбавай дысплей: Shows current pressure, target pressure, and battery level.
• Pressure Unit Button (R): Short press to switch between BAR/PSI/KPA/KG/CM^2. Long press to turn off.
• Кнопкі +/-: Adjust target pressure.
• Кнопка харчавання: Start/stop inflation.
• Святлодыёдны святло: Забяспечвае падсвятленне ў цёмных умовах.
• Інфляцыйны порт: Where the inflation tube connects.
• Порт для зарадкі USB: Для падзарадкі прылады.

Выява: Падрабязны view of the inflator's digital display, highlighting the pressure unit switch button (R) and the plus/minus buttons for adjusting the preset pressure.

Настройка

1. Першапачатковая плата: Before first use, fully charge the inflator using the provided USB cable. The digital display will indicate charging status. A full charge takes approximately 3-4 hours.
2. Прымацуйце надзімальную трубку: Screw the inflation tube securely into the inflation port on the device.

Інструкцыя па эксплуатацыі

General Inflation Steps:

1. Connect to Tire Valve: Screw the inflation tube's nozzle onto the tire valve stem. Ensure a tight connection to prevent air leakage.
2. Уключэнне: The device typically powers on automatically when the inflation tube is connected or by pressing any button.
3. Выберыце адзінку вымярэння ціску: Short press the "R" button to cycle through pressure units (BAR, PSI, KPA, KG/CM^2) until your desired unit is displayed.
4. Устанавіць мэтавы ціск: Use the "+" and "-" buttons to adjust the target pressure to the recommended value for your item (e.g., vehicle tire, bicycle tire, sports ball).
5. Пачаць інфляцыю: Press the power button to begin inflation. The digital display will show the current pressure increasing.
6. Аўтаматычнае адключэнне: The inflator will automatically stop when the preset target pressure is reached.
7. Адключыць: Unscrew the inflation tube from the valve stem.
8. Выключэнне: Long press the "R" button to turn off the inflator.

Image: A step-by-step visual guide demonstrating the easy operation of the tire inflator, including connecting the hose, setting pressure, starting inflation, and the automatic shut-off feature.

Выкарыстанне святлодыёднага святла:

The built-in LED light can be activated to provide illumination during low-light conditions or nighttime use. Refer to the device's specific button for light activation (often a dedicated button or a long press of the power button).

Image: The tire inflator in use, with its integrated LED light illuminating the tire valve area, demonstrating its utility for nighttime or low-light inflation.

Выкарыстанне розных фарсунак:

The inflator comes with 4 extra nozzles for various applications:

• Needle Nozzle: For sports balls (e.g., basketballs, footballs).
• Tapered Nozzles: For inflatable toys, swimming rings, and other low-pressure inflatables.

Attach the appropriate nozzle to the inflation tube before connecting to the item to be inflated.

Image: An illustration detailing the four preset inflation modes available on the device, showing recommended PSI levels for car tires (36 PSI), motorcycles (33 PSI), bicycles (30 PSI), and balls (8 PSI).

Тэхнічнае абслугоўванне

• Уборка: Працярыце знешнія паверхні нагнетальніка мяккай губкайamp тканіна. Не выкарыстоўвайце агрэсіўныя хімікаты або абразіўныя ачышчальнікі.
• захоўванне: Store the inflator and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the inflation tube is neatly coiled.
• Сыход за батарэяй: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device periodically if not used for a long time.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

• Назва мадэлі: СТ-5007
• Максімальны працоўны ціск: 150 PSI
• Магутнасць паветранага патоку: 12 л / мін
• акумулятар: 2 * 2000 mAh high-density USB rechargeable Lithium-ion batteries (included)
• Час зарадкі: 3-4 гадзін
• Час бесперапыннага выкарыстання: Approximately 30 minutes (on full charge)
• Уваходны кнtage: 12V (from internal battery)
• Узровень шуму: 10 dB (as per specification, though typical operating noise might be higher)
• Вага прадмета: 1.26 фунта
• Памеры: 8.39 х 6.26 х 2.64 цаляў (памеры ўпакоўкі)

Гарантыя і падтрымка

Гэты прадукт пастаўляецца з a Гарантыя 1 год from the date of purchase. For warranty claims, technical support, or any inquiries, please contact the seller or manufacturer through your purchase platform.

Калі ласка, захавайце пацвярджэнне пакупкі для пацверджання гарантыі.