WOLFANG Solar Wildlife Camera WT03 User Manual

Уводзіны

Thank you for choosing the WOLFANG WT03 Solar Wildlife Camera. This advanced trail camera is designed for wildlife monitoring, outdoor security, and nature observation, offering high-resolution imaging, robust features, and sustainable power solutions. Please read this manual carefully before operating the camera to ensure optimal performance and longevity.

Змест пакета

Image: The WOLFANG WT03 Solar Wildlife Camera, user manual, mounting strap, USB cable, and mounting hardware.

Ensure all items are present and in good condition. If any items are missing or damaged, please contact WOLFANG customer support.

• WOLFANG WT03 Wildlife Camera
• Мантажны рэмень
• Кабель USB
• Мантажныя прыналежнасці (шрубы, дзюбелі для сцяны)
• Кіраўніцтва карыстальніка
• Карта памяці Micro SD на 32 ГБ (папярэдне ўсталяваная)

Прадукт скончаныview

Выява: спераду view of the WOLFANG WT03 camera, highlighting the integrated solar panel, main lens, and motion sensor.

The WOLFANG WT03 features an integrated solar panel for continuous power, a high-resolution camera for capturing 4K video and 46MP images, and advanced night vision capabilities. Its robust IP66 waterproof design ensures reliable operation in various outdoor conditions.

Асноўныя характарыстыкі:

• 4K@30FPS Video & 46MP Image Resolution: Захоплівае выразныя і дэталізаваныя здымкі ежыtagе і фатаграфіі.
• Integrated Solar Panel & 4400mAh Battery: Provides sustainable power and extended battery life.
• WiFi & Bluetooth Connectivity: Allows for easy app control, live viewING, і file transfer to your smartphone (within 33 feet).
• Хуткасць спрацоўвання 0.1 с: Ensures rapid capture of motion-activated events.
• 120° Night Vision: Equipped with 850nm low-luminescence LEDs for clear nighttime images up to 65 feet.
• Воданепранікальнасць IP66: Распрацаваны, каб вытрымліваць суровыя ўмовы надвор'я.
• цыклічны запіс: Аўтаматычна перазапісвае старыя files, калі SD-карта запоўнена.

Настройка

1. Устаноўка батарэі

The camera has a built-in 4400mAh lithium battery. For extended operation, especially in low temperatures, it is recommended to install 4 AA batteries (not included) as backup power.

1. Open the camera's side latch and swing open the housing.
2. Знайдзіце батарэйны адсек.
3. Устаўце 4 батарэйкі АА, выконваючы палярнасць (+/-).
4. Close the battery compartment and secure the housing latch.

Заўвага: The built-in lithium battery is the priority power source. AA batteries serve as backup. Ensure the built-in battery is charged via the solar panel or USB-C before first use.

2. Устаноўка SD-карты

A 32GB Micro SD card is pre-installed. The camera supports Micro SD cards up to 128GB.

1. With the camera powered off, open the housing.
2. Знайдзіце слот для карты Micro SD.
3. Устаўце карту Micro SD залацістымі кантактамі ўніз да пстрычкі.
4. To remove, push the card in until it clicks, then release.

Важна: Format the SD card in the camera's settings menu before first use to ensure compatibility and optimal performance.

3. Мантаж камеры

The camera can be mounted using the included strap or mounting hardware.

Image: The WOLFANG WT03 camera mounted on a tree, illustrating its integrated solar panel technology for power supply.

• Мацаванне рамянём: Thread the provided strap through the slots on the back of the camera and secure it around a tree or pole.
• Шрубавае мацаванне: Use the included mounting bracket and screws to attach the camera to a wall or flat surface.

Парады па размяшчэнні:

• Mount the camera at a height of 3-6 feet (1-2 meters) for optimal detection.
• Пераканайцеся, што сонечная панэль падвяргаецца ўздзеянню прамых сонечных прамянёў для максімальнай эфектыўнасці зарадкі.
• Avoid placing the camera directly facing the sun or strong light sources to prevent overexposure.
• Clear any obstacles (branches, tall grass) that might trigger false detections or obstruct the view.

Аперацыя

1. Уключэнне / выключэнне харчавання

• To power on, slide the mode switch from OFF to SETUP or ON.
• To power off, slide the mode switch to OFF.

2. Basic Settings (SETUP Mode)

In SETUP mode, you can access the camera's menu and adjust various parameters using the control buttons.

• рэжым: Select Photo, Video, or Photo+Video.
• Раздзяленне фота: Choose from various MP settings (e.g., 46MP, 30MP, 20MP).
• Дазвол відэа: Select 4K, 2.7K, 1080P, etc. (4K 30fps recommended).
• Інтэрвал PIR: Set the delay between detections.
• Хуткасць запуску: Fixed at 0.1s for fast capture.
• Прамежак часу: Set intervals for continuous recording without motion detection.
• Фарматаваць SD-карту: Erase all data on the SD card.
• Дата і час: Усталюйце бягучую дату і час.

Image: Visual representation of the camera's 46MP image and 4K 30fps video resolution capabilities.

Image: A squirrel captured mid-air, illustrating the camera's ultra-fast 0.1s trigger speed.

Image: A side-by-side comparison demonstrating the superior night vision quality of the WOLFANG camera using 850nm IR lamps.

3. WiFi & App Connection

The WOLFANG WT03 can be controlled and monitored via a smartphone app. The WiFi connection range is limited to 33 feet (10 meters).

Image: A smartphone showing the camera's app interface with a live view of deer, demonstrating WiFi connection and app control.

1. Download the "WOLFANG Wildlife" app from your smartphone's app store or scan the QR code provided in the camera's interface (usually in SETUP mode). A relevant link for the app is тут.
2. Turn the camera's mode switch to SETUP.
3. Open the WOLFANG Wildlife app on your phone.
4. Follow the in-app instructions to connect to the camera's WiFi network. You may need to enable Bluetooth on your phone first to discover the camera.
5. Пасля падключэння вы можаце view жывы footage, adjust settings, and download fileнепасрэдна на ваш тэлефон.

Пошук і ліквідацыю непаладак падключэння: If connection issues occur, try plugging in the charging cable to the camera and setting the app to manual connection. Reconnecting might require re-plugging the charging cable.

4. Viewing/Downloading Files

• Праз прыкладанне: Connect to the camera via WiFi using the app. Navigate to the album/gallery section to view and download photos/videos.
• Праз кабель USB: Connect the camera to a computer using the provided USB cable. The camera will appear as a removable disk, allowing you to access files.
• Directly on Camera: In SETUP mode, use the navigation buttons to browse captured photos and videos on the camera's screen.
• Счытвальнік SD-карт: Remove the Micro SD card from the camera and insert it into a compatible card reader connected to a computer.

Image: A visual explanation of the loop recording function, showing how the camera overwrites the oldest footage when the SD card reaches full capacity.

Тэхнічнае абслугоўванне

• Уборка: Use a soft, dry cloth to clean the camera lens and solar panel. Avoid abrasive cleaners.
• Сыход за батарэяй: For optimal battery life, ensure the solar panel is regularly exposed to sunlight. If storing the camera for extended periods, fully charge the built-in battery and remove any AA batteries.
• захоўванне: Калі камера не выкарыстоўваецца, захоўвайце яе ў прахалодным сухім месцы.
• Абнаўленні прашыўкі: Check the official WOLFANG webперыядычна правярайце сайт на наяўнасць даступных абнаўленняў прашыўкі для паляпшэння прадукцыйнасці і дадання новых функцый.

Image: The WOLFANG WT03 camera shown in rainy conditions, emphasizing its IP66 super waterproof rating and protective eave design.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

WOLFANG provides a Гарантыйнае абслугоўванне 2 год for the WT03 Solar Wildlife Camera. Additionally, a 1-month free return & exchange палітыка даступная.

For any support needs, questions, or accessory package upgrades, please contact WOLFANG customer service directly.

электронная пошта: support.vc@wolfang.co

WOLFANG is committed to providing high-quality imaging products and prompt customer support.