Geeni Smart Water Alarm Leak Detector with Siren - User Manual

Уводзіны

The Geeni Smart Water Alarm Leak Detector with Siren is designed to provide early warning of water leaks in your home. This device helps prevent potential water damage by detecting leaks and alerting you through its built-in siren and mobile application. It integrates with your home Wi-Fi network for remote monitoring and smart home automation.

Асноўныя характарыстыкі

• Instant Leak Detection: Rapidly identifies the presence of water.
• Абвесткі ў рэжыме рэальнага часу: Sends immediate notifications to your smartphone.
• Built-in 80dB Alarm: Emits a loud siren to alert occupants.
• Monitor from Anywhere: Access device status and alerts remotely via the Geeni app.
• Інтэграцыя разумнага дома: Compatible with other Geeni smart home products for automated responses.
• Абвестка аб нізкім зарадзе батарэі: Notifies you when batteries need replacement.
• Лёгкая ўстаноўка: Designed for quick and straightforward installation.
• 24/7 Peace of Mind: Continuous monitoring for enhanced home safety.

Figure 1: Key features of the Geeni Smart Water Alarm Leak Detector.

Змест пакета

Праверце наяўнасць усіх прадметаў у камплекце:

• 1x Geeni Smart Water Sensor
• 1x Siren Mounting Adhesive
• 1x Кіраўніцтва карыстальніка
• 2 батарэйкі AAA

Малюнак 2: Змест у камплекце з прадуктам.

Прадукт скончаныview

Familiarize yourself with the components of your Geeni Smart Water Alarm Leak Detector:

• Святлодыёдны святло: Indicates device status (e.g., pairing mode, leak detected).
• Задаць ключ: Выкарыстоўваецца для спалучэння і скіду налад прылады.
• Дакладчык: Emits the 80dB siren alarm.
• Датчык-зонд: The part that detects water. Must be placed flat on the surface where leaks may occur.
• Батарэйны адсек: Holds 2x AAA batteries.
• Даўжыня кабеля: The sensor probe is connected to the main unit by a 3.28 ft (1 m) cable.

Малюнак 3: Пярэдняя і задняя часткі view of the device with labeled components and dimensions.

Настройка

1. Усталюйце батарэі

1. Адкрыйце батарэйны адсек на задняй панэлі асноўнага блока.
2. Insert 2x AAA batteries, ensuring correct polarity.
3. Надзейна зачыніце батарэйны адсек.

2. Download and Install the Geeni App

• Пошук "Geeni" in the Apple App Store or Google Play Store.
• Спампуйце і ўсталюйце праграму.
• Зарэгіструйце новы ўліковы запіс або ўвайдзіце ў сістэму, калі ён у вас ужо ёсць.

3. Pair the Device with Wi-Fi

1. Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network. The device does not support 5 GHz networks.
2. Open the Geeni app and tap the "+" icon to add a new device.
3. Follow the on-screen instructions in the app to put the water sensor into pairing mode and connect it to your Wi-Fi network. The LED light on the device will indicate its pairing status.

4. Размяшчэнне прылады

Strategically place the water sensor in areas prone to leaks:

• Пад ракавінамі (кухня, ванная пакой)
• In basements
• Каля воданагравальнікаў
• In laundry rooms
• Behind dishwashers or refrigerators

Use the provided mounting adhesive to secure the main unit. Ensure the sensor probe lies flat on the surface where water might accumulate first.

Малюнак 4: Выпamples of multi-use placement for the water sensor.

Аперацыя

Leak Detection and Alerts

Once installed and connected, the Geeni Smart Water Alarm continuously monitors for water. When the sensor probe detects water:

• The device will emit a loud 80-decibel siren.
• You will receive an immediate notification on your smartphone via the Geeni app.

Figure 5: Real-time leak detection and app notification.

Рэгуляванне налад будзільніка

You can customize the alarm settings through the Geeni app:

• Гучнасць сірэны: Adjust the volume from mute (0dB) up to 80dB.
• Працягласць будзільніка: Set the duration of the siren from 30 seconds to 180 seconds.

Figure 6: Alarm volume and duration adjustment options.

Тэхнічнае абслугоўванне

Замена батарэі

The device is powered by 2x AAA batteries with an expected lifespan of 3-4 months. The Geeni app will send a low battery alert when replacement is needed.

1. When a low battery alert is received, open the battery compartment.
2. Remove the old batteries and insert two new AAA batteries, observing correct polarity.
3. Зачыніце батарэйны адсек.

Тэставанне прылады

It is recommended to periodically test the water sensor to ensure it is functioning correctly:

1. Place a small amount of water (e.g., a few drops) onto the sensor probe.
2. Verify that the siren sounds and you receive a notification on your smartphone.
3. Dry the sensor probe thoroughly after testing.

Ліквідацыю непаладак

• Прылада не падключаецца да Wi-Fi:
  Ensure your Wi-Fi network is 2.4 GHz. The device does not support 5 GHz. Try moving the device closer to your Wi-Fi router. If issues persist, try deleting the device from the Geeni app and re-pairing it following the setup instructions.
• Няма апавяшчэнняў праграм:
  Check your smartphone's notification settings for the Geeni app to ensure notifications are enabled. Also, verify that the device is properly connected to Wi-Fi and has sufficient battery power.
• Siren not sounding or too quiet:
  Check the battery level. Ensure the siren volume is not set to mute in the Geeni app settings.
• Sensor not detecting water:
  Ensure the sensor probe is lying flat and making good contact with the surface where water might collect. Clean the sensor contacts if they appear dirty.
• Device appears offline in app:
  Check your Wi-Fi connection. If the Wi-Fi network is down or unstable, the device may appear offline. Replace batteries if they are low.

For further assistance, refer to the support section within the Geeni app or visit support.mygeeni.com.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

Інфармацыя аб гарантыі

This Geeni product comes with a 1-гадовая абмежаваная гарантыя з даты пакупкі. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі. Гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры нармальным выкарыстанні.

Падтрымка кліентаў

If you encounter any issues or have questions regarding your Geeni Smart Water Alarm Leak Detector, please contact Geeni customer support:

• Інтэрнэт-падтрымка: Наведайце support.mygeeni.com
• Падтрымка ў дадатку: Access support directly through the Geeni mobile application.