Syntech B0D62W5GTH Bluetooth 5.3 Transmitter Receiver User Manual

Уводзіны

The Syntech B0D62W5GTH is a versatile 2-in-1 Bluetooth 5.3 audio adapter designed to function as both a transmitter and a receiver. This device allows you to wirelessly connect your Bluetooth headphones or earbuds to non-Bluetooth audio sources, such as in-flight entertainment systems, gym equipment, or older car stereos. It also enables you to stream audio from your smartphone or tablet to wired speakers or car audio systems. Featuring an LED display for easy operation and dual pairing capability, this adapter enhances your audio experience with stable, low-latency connectivity.

Змест пакета

Калі ласка, пераканайцеся, што ўсе пералічаныя ніжэй прадметы ўваходзяць у ваш пакет:

• Syntech Bluetooth Transmitter/Receiver (B0D62W5GTH)
• Сумка для пераноскі
• Ахоўны сіліконавы чахол
• карабін
• Dual 3.5mm AUX Adapter (for airplane use)
• Зарадны кабель USB-C
• Аўдыёкабель 3.5 мм

Image: Syntech B0D62W5GTH device, 3.5mm audio cable, carrying case, carabiner, and dual 3.5mm AUX adapter.

Схема прадукту

Азнаёмцеся з кампанентамі і элементамі кіравання прылады:

Выява: спераду і збоку view of the Syntech B0D62W5GTH. Labels include Visible Screen, Pairing Button, Next/Volume Up Button, Previous/Volume Down Button, Power/Confirm/Pause Button, USB-C Charging Port, and TX/RX Mode Switch.

• Visible Screen: Displays device status, pairing information, and volume.
• Кнопка спалучэння: Ініцыюе спалучэнне праз Bluetooth.
• Кнопка «Далей»/«Павялічыць гучнасць»: Navigates forward or increases volume.
• Кнопка «Назад»/«Змяншэнне гучнасці»: Navigates backward or decreases volume.
• Power/Confirm/Pause Button: Powers on/off, confirms selections, or plays/pauses audio.
• Порт для зарадкі USB-C: Для зарадкі прылады.
• Пераключальнік рэжымаў перадачы/прыёму: Пераключае паміж рэжымамі перадатчыка (TX) і прыёмніка (RX).

Настройка

1. Зарадка прылады

Before initial use, fully charge the Syntech B0D62W5GTH. Connect the provided USB-C charging cable to the device's USB-C port and the other end to a standard USB power adapter (not included). A full charge takes approximately 1.5 hours and provides up to 12 hours of operation.

Image: The Syntech B0D62W5GTH connected to a power outlet via its USB-C charging cable, indicating charging status.

2. Transmitter Mode (TX) Setup

Use TX mode to send audio from a non-Bluetooth source (e.g., airplane entertainment, TV, gym equipment) to your Bluetooth headphones or earbuds.

1. Пераключэнне ў рэжым перадачы: Locate the TX/RX switch on the side of the device and slide it to the 'TX' position.
2. Уключэнне: Press and hold the Power/Confirm/Pause button for 3 seconds to turn on the device. The screen will display 'Pairing...'
3. Падключыцеся да крыніцы гуку: Plug the 3.5mm audio cable into the Syntech adapter's audio jack and the other end into the audio output of your desired source (e.g., airplane seat audio jack). If the source has a dual 3.5mm jack, use the provided dual AUX adapter.
4. Пара навушнікаў: Put your Bluetooth headphones or earbuds into pairing mode. The Syntech adapter will automatically search for nearby Bluetooth devices.
5. Select and Confirm: Use the Next/Volume Up or Previous/Volume Down buttons to navigate through the detected devices on the Syntech's screen. Once your headphones are highlighted, press the Power/Confirm/Pause button to confirm the connection.

Image: The Syntech B0D62W5GTH connected to an airplane seat's audio jack, transmitting audio to wireless earbuds.

3. Receiver Mode (RX) Setup

Use RX mode to receive audio from a Bluetooth-enabled device (e.g., smartphone, tablet) and play it through a wired audio system (e.g., car stereo, home speakers).

1. Пераключэнне ў рэжым RX: Slide the TX/RX switch on the side of the device to the 'RX' position.
2. Уключэнне: Press and hold the Power/Confirm/Pause button for 3 seconds to turn on the device. The screen will display 'Pairing...'
3. Падключэнне да аўдыёсістэмы: Plug the 3.5mm audio cable into the Syntech adapter's audio jack and the other end into the AUX input of your car stereo or home speaker system.
4. Спалучэнне з тэлефонам/планшэтам: On your smartphone or tablet, go to Bluetooth settings and search for new devices. Select 'B100' from the list to connect.
5. Прайграць аўдыя: Once connected, any audio played on your phone or tablet will be streamed wirelessly to your wired audio system.

Image: The Syntech B0D62W5GTH connected to a car's AUX input, streaming music from a smartphone.

4. Падвойнае спалучэнне

The Syntech B0D62W5GTH supports connecting to two Bluetooth headphones simultaneously in TX mode, allowing two users to share audio from a single source.

1. Ensure the first pair of headphones is already connected in TX mode (follow steps 1-5 above).
2. Press the Bluetooth Pairing button on the Syntech adapter. The screen will indicate it is searching for a second device.
3. Перавядзіце другую пару Bluetooth-навушнікаў у рэжым спалучэння.
4. Once detected, use the navigation buttons to select the second device on the screen and press the Power/Confirm/Pause button to connect.

Image: The Syntech B0D62W5GTH connected to an airplane entertainment system, with two pairs of headphones (AirPods and over-ear headphones) receiving audio simultaneously.

Інструкцыя па эксплуатацыі

Асноўныя элементы кіравання

Тэхнічнае абслугоўванне

• Трымайце прыладу ў чысціні, праціраючы яе мяккай сухой тканінай.
• Пазбягайце ўздзеяння на прыладу экстрэмальных тэмператур, вільготнасці або прамых сонечных прамянёў.
• Не спрабуйце разбіраць або рамантаваць прыладу самастойна, бо гэта прывядзе да анулявання гарантыі.
• Store the device in its protective carrying case when not in use to prevent damage.

Ліквідацыю непаладак

Праблемы з падключэннем

If you experience long pairing times (around 90 seconds), unstable connections, or high latency:

• Try reconnecting the device.
• Ensure your headphones or earbuds are in proper pairing mode.
• Consider using different headphones to rule out headphone-specific issues.
• Clear the memory of previously paired devices on the Syntech adapter by long-pressing the Bluetooth Pairing button.

Volume Issues

If you encounter problems with audio volume:

• Ensure the transmitter or your headphones are not in pause mode.
• Long press the Next/Volume Up button on the Syntech adapter to increase the volume.
• Restart the device and your connected audio equipment.

Няма сілы

• Пераканайцеся, што прылада цалкам зараджана. Падключыце яе да крыніцы харчавання з дапамогай кабеля USB-C, які ўваходзіць у камплект.
• Verify that the charging cable and power adapter are functioning correctly.

Тэхнічныя характарыстыкі

Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ:

• This device emits radio waves and should be used with caution to avoid interference with other wireless devices.
• Do not expose the battery to extreme temperatures or humidity.
• Keep the device away from fire and other heat sources.
• Do not dispose of the battery in fire. Follow local regulations for battery disposal.
• Выкарыстоўвайце толькі зарадны кабель і адаптар, якія ўваходзяць у камплект.
• Не выкарыстоўвайце прыладу падчас зарадкі.
• Do not use the device while sleeping or in a moving vehicle.
• Always follow the manufacturer's instructions for safe use and disposal.

Гарантыя і падтрымка

Syntech provides a 12-month worry-free period for this product. For any questions, concerns, or technical assistance, please contact our dedicated customer support team. Refer to the product packaging or the official Syntech webсайт для кантактных дадзеных.