RetroSound LABC-M1-226-08-80F1

RetroSound RetroRadio LABC-M1-226-08-80F1 Instruction Manual

For 1967-68 Ford Mustang

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your RetroSound RetroRadio LABC-M1-226-08-80F1. This unit is designed for 1967-68 Ford Mustang vehicles and features an AM/FM RDS tuner, Bluetooth connectivity, and auxiliary input.

2. Інфармацыя па бяспецы

  • Always disconnect the vehicle's battery before installation to prevent electrical shorts.
  • Ensure all wiring connections are secure and properly insulated to avoid damage to the unit or vehicle.
  • Не карыстайцеся прыладай такім чынам, каб гэта адцягвала вашу ўвагу ад кіравання аўтамабілем.
  • Refer to a professional installer if you are unsure about any part of the installation process.

3. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

  • RetroSound RetroRadio LABC-M1-226-08-80F1 Head Unit
  • Wiring Harness (Power/Speakers)
  • InfiniMount Brackets
  • Рукаватыя валы
  • Знешні мікрафон
  • Мантажнае абсталяванне
Image of two knob shafts, typically used for radio controls.

Figure 3.1: Included Knob Shafts

Image of the external microphone with a clip for hands-free calling.

Figure 3.2: External Microphone

4. Настройка і ўстаноўка

4.1. Памеры

Before installation, ensure the unit fits your vehicle's dashboard opening. Refer to the diagram below for precise measurements.

Diagram showing the dimensions of the RetroSound head unit: 4.34 inches (110 mm) wide, 4 inches (100 mm) deep, and 2 inches (51 mm) high.

Малюнак 4.1: Памеры прылады

4.2. Mounting with InfiniMount Brackets

The patented InfiniMount brackets allow for flexible mounting of the unit's shafts at various angles to accommodate different dashboard configurations.

Images showing the InfiniMount brackets and how they allow the radio shafts to be mounted at different angles.

Figure 4.2: InfiniMount Brackets and Flexible Shaft Mounting

  1. Attach the InfiniMount brackets to the sides of the head unit using the provided screws.
  2. Insert the knob shafts into the desired positions on the brackets.
  3. Adjust the angle of the shafts as needed to align with your vehicle's dashboard openings.
  4. Secure the unit into the dashboard opening.

4.3. Падключэнне правадоў

Carefully connect all necessary wires as shown in the diagram below. Ensure all connections are secure.

Diagram showing the rear of the RetroSound head unit with labeled connections: Radio Controls, Power/Speakers (Harness Included), Antenna, AUX In, External Mic.

Малюнак 4.3: Падключэнні на задняй панэлі

  • Магутнасць/Дынамікі: Connect the included wiring harness to the corresponding port on the unit and then to your vehicle's power and speaker wiring. Refer to your vehicle's wiring diagram for correct connections.
  • Антэна: Connect your vehicle's AM/FM antenna to the antenna input.
  • AUX Уваход: Connect external audio devices using a 3.5mm audio cable to this input.
  • External Mic: Plug in the provided external microphone for hands-free calling. Position the microphone in a location that allows for clear voice pickup.
  • Элементы кіравання радыё: Connect to compatible vehicle radio controls if available.

5. Інструкцыя па эксплуатацыі

5.1. Уключэнне/выключэнне харчавання

Press the power button (usually integrated with the volume knob) to turn the unit on or off.

5.2. AM/FM-цюнэр

  • Выбар групы: Press the BAND button to switch between AM and FM bands.
  • налада: Use the tuning knobs or seek buttons to find radio stations.
  • Прэсеты: The unit supports 30 presets. To save a station, tune to the desired station, then press and hold a preset button until you hear a confirmation beep. To recall a preset, press the corresponding preset button.
  • RDS (сістэма радыёданых): When available, RDS will display station information such as station name, song title, or artist.
  • Частоты цюнера: The tuner frequencies can be selected for USA, Europe, Australia, Japan, or Russia. Refer to the settings menu to adjust this if needed.

5.3. Bluetooth Connectivity (Version 5.0)

Прылада мае ўбудаваны Bluetooth для hands-free званкоў і струменевай перадачы аўдыё.

  1. Спалучэнне:
    • Пераканайцеся, што Bluetooth уключаны на вашым мабільным прыладзе.
    • On the RetroRadio, navigate to the Bluetooth menu (refer to the display for menu options).
    • Select "Pair Device" or similar option. The unit will become discoverable.
    • On your mobile device, search for available Bluetooth devices and select "RetroRadio" (or similar name).
    • Пацвердзіце код спалучэння, калі будзе запытана.
  2. Гучная сувязь: Once paired, you can make and receive calls through the unit using the external microphone. Use the unit's controls to answer, end, or reject calls.
  3. Паток аўдыё: Play audio from your paired mobile device directly through the RetroRadio. Use the unit's controls to play, pause, skip tracks, and adjust volume.

5.4. Дапаможны ўваход

Connect any portable audio device (e.g., MP3 player, smartphone) to the rear-mounted auxiliary input using a 3.5mm audio cable. Select the AUX input source on the RetroRadio to listen to audio from the connected device.

6. Тэхнічнае абслугоўванне

  • Уборка: Use a soft, dry cloth to clean the unit's display and controls. Do not use abrasive cleaners or solvents.
  • Абнаўленні прашыўкі: Check the RetroSound webперыядычна правярайце сайт на наяўнасць даступных абнаўленняў прашыўкі, каб забяспечыць аптымальную прадукцыйнасць.

7. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Няма ўладыНяспраўнае падключэнне да электрасеткі, перагарэлы засцерагальнік, адключаны акумулятар аўтамабіля.Check power wiring, inspect vehicle fuses, ensure battery is connected.
Няма гукуSpeaker wires disconnected, volume too low, incorrect source selected.Verify speaker connections, increase volume, select correct audio source (AM/FM, Bluetooth, AUX).
Bluetooth не спалучаеццаBluetooth not enabled on device, unit not in pairing mode, device too far.Ensure Bluetooth is on, put unit in pairing mode, bring device closer, try re-pairing.
Дрэнны прыём радыёАнтэна не падключана, пашкоджана антэна, зона слабага сігналу.Check antenna connection, inspect antenna for damage, try tuning to a stronger station.

8. Тэхнічныя характарыстыкі

  • мадэль: LABC-M1-226-08-80F1
  • Марка: Рэтрагук
  • Ampпадпітка: Убудаваны MOSFET магутнасцю 275 Вт (пікавая магутнасць) amplifier, 18 watts RMS x 4 channels
  • Bluetooth: Version 5.0 (with external microphone for hands-free calls)
  • Цюнэр: AM/FM RDS-цюнэр з 30 прадусталяванымі станцыямі
  • Частоты цюнера: Выбар (ЗША/Еўра/Аўстралія/Японія/РУСІЯ)
  • Уваходы: Rear-mounted Auxiliary input (3.5mm), Bluetooth
  • Энерганезалежная памяць: так
  • Памеры прылады (В х Ш х Г): Approximately 2" x 4.34" x 4" (51mm x 110mm x 100mm) - Refer to Figure 4.1 for exact measurements.
  • Вага прадмета: 3.3 фунта

9. Інфармацыя аб гарантыі

This RetroSound product is covered by a Гарантыя 1 год from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to the official RetroSound webсайт або звярніцеся ў службу падтрымкі кліентаў.

10. Падтрымка кліентаў

If you encounter any issues not covered in this manual or require further assistance, please contact RetroSound customer support. Contact information can typically be found on the official RetroSound webсайт.

Webсайт: www.retrosound.com

© 2024 RetroSound. Усе правы абаронены.