Yaheetech B0D6RL3MBX

Yaheetech Twin Size Metal Platform Bed Frame Instruction Manual

Model: B0D6RL3MBX

Уводзіны

This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Twin Size Metal Platform Bed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Важная інфармацыя па бяспецы

  • Ёмістасць вагі: Do not load the bed frame with more than 350 pounds (159 kg). Exceeding this limit may cause damage to the frame and potential injury.
  • Вострыя краю: Exercise caution around all parts during assembly and use to avoid injury from sharp edges.
  • зборка: Ensure all bolts and screws are securely tightened before use. Periodically check and retighten fasteners as needed.
  • дзеці: Трымайце дробныя дэталі далей ад дзяцей падчас зборкі.
  • Размяшчэнне: Пастаўце каркас ложка на роўную паверхню.

Спіс запчастак

Before assembly, verify that all components are present. If any parts are missing or damaged, please contact Yaheetech customer support.

  • Падгалоўе ложка
  • Падножжа
  • Бакавыя рэйкі
  • Апорныя планкі
  • Апорныя ногі
  • Hardware (bolts, nuts, washers, Allen wrench)
Diagram showing all bed frame components and dimensions

Выява: Разабраная view of the bed frame showing all parts and their general arrangement.

Інструкцыі па ўсталёўцы і зборцы

Assembly typically requires two adults. An assembly video may be available on the Yaheetech official website or product page for a more direct demonstration.

Крок 1: Прымацуйце бакавыя парэнчы да ўзгалоўя і падножжа ложка

Connect the side rails to the headboard and footboard using the provided bolts and Allen wrench. Ensure all connections are firm but do not overtighten initially.

Close-up of L-shaped plates being fastened to connect bed frame components

Image: Detail showing L-shaped plates used for stable connections between frame sections.

Step 2: Install Support Slats

Insert the metal support slats into the designated notches on the side rails. Press firmly to secure each slat in place. The built-in slats are designed to prevent the mattress from sliding.

Diagram showing how to insert metal pipes into notches for slat installation

Image: Visual guide for aiming and pressing metal pipes into notches to secure slats.

Illustration demonstrating how built-in slats prevent mattress sliding

Image: Comparison showing a mattress secured by built-in slats versus one that can slide easily.

Крок 3: Канчатковае зацягванне

Once all components are assembled, go back and securely tighten all bolts and screws. Do not overtighten to avoid stripping threads.

Эксплуатацыя і выкарыстанне

The Yaheetech Metal Platform Bed Frame is designed to support a twin-size mattress directly, eliminating the need for a box spring. Ensure the mattress is properly centered on the frame.

The frame provides 12.6 inches (32 cm) of ground clearance, offering convenient under-bed storage space.

Diagram showing 12.6 inches of ground clearance for under-bed storage

Image: Measurement indicating the available space beneath the bed frame for storage.

Тэхнічнае абслугоўванне

  • Уборка: Працярыце металічную раму сухой або злёгку змочанай сурвэткайamp тканінай. Пазбягайце выкарыстання агрэсіўных хімічных рэчываў або абразіўных ачышчальнікаў, якія могуць пашкодзіць пакрыццё.
  • Зашпількі: Перыядычна правярайце ўсе балты і шрубы, каб пераканацца, што яны зацягнуты. Па меры неабходнасці падцягвайце іх, каб падтрымліваць стабільнасць і прадухіліць скрып.
  • агляд: Рэгулярна правярайце раму на наяўнасць прыкмет зносу або пашкоджанняў.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Каркас ложка хістаецца або няўстойлівы.Аслабленыя балты або няроўная падлога.Ensure all bolts are securely tightened. Move the bed to a level surface or use shims under legs if necessary.
Скрыпучыя гукі.Няшчыльныя злучэнні або трэнне паміж металічнымі дэталямі.Tighten all bolts. Apply a small amount of lubricant (e.g., silicone spray) to connection points if squeaking persists.
Матрац слізгае па каркасе.Mattress not properly seated or slats not fully engaged.Ensure the mattress is centered. Verify all slats are firmly pressed into their notches.

Тэхнічныя характарыстыкі

мадэльB0D6RL3MBX
МаркаYaheetech
ПамерДвайнік
Памеры прадукту77.5"Д х 41"Ш х 35"В (196.8 см Д х 104.1 см Ш х 88.9 см В)
Сумяшчальны памер матраца75'' L x 39'' W (190.5 cm L x 99.1 cm W)
МатэрыялЖалеза
КолерЧорны
Максімальная грузападымальнасць350 фунтаў (159 кг)
Дарожны прасвет12.6 цаляў (32 см)
Патрабуецца зборкатак
Yaheetech Twin Size Metal Platform Bed Frame with dimensions

Image: Overall dimensions of the Yaheetech Twin Size Metal Platform Bed Frame.

Гарантыя і падтрымка

For warranty information, missing parts, or technical assistance, please contact Yaheetech customer support directly. Refer to your purchase documentation or the official Yaheetech webсайт для кантактных дадзеных.

вытворца: Yaheetech

Дата першай даступнасці: 11 чэрвеня 2024 г

© 2024 Yaheetech. All rights reserved.