Beatbot AquaRefine Kit for AquaSense Pro Robotic Pool Cleaner

1. Уводзіны

The Beatbot AquaRefine Kit is a natural and sustainable water clarifying agent designed to work exclusively with the Beatbot AquaSense Pro robotic pool cleaner. This kit efficiently clears cloudy water, removes dirt, oils, and residue, and improves the overall efficiency of your pool's filtration system. It is formulated to be environmentally friendly and safe for various pool types.

Important Note: This clarifying agent kit is specifically designed for use with the Beatbot AquaSense Pro robotic pool cleaner ONLY. It is not compatible with Beatbot Aquasense 2 Ultra, Aquasense 2 Pro, iSkim Ultra Solar Powered Robotic Pool Skimmer, or for standalone pool cleaning.

2. Інфармацыя па бяспецы

• Захоўваць у месцах, недаступных дзецям і хатнім жывёлам.
• Avoid direct contact with eyes and skin. In case of contact, rinse thoroughly with water.
• Do not ingest. If ingested, seek medical attention immediately.
• Захоўвайце камплект у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
• Утылізуйце выкарыстаныя картрыджы ў адпаведнасці з мясцовымі правіламі.

3. Змесціва ўпакоўкі

Your Beatbot AquaRefine Kit typically includes:

• Beatbot AquaRefine Clarifying Agent Cartridges (Quantity may vary based on specific kit purchased).

Image: Two Beatbot AquaRefine clarifying agent cartridges, blue in color, shown on a white background.

4. Настройка і ўстаноўка

Follow these steps to install the AquaRefine Kit into your Beatbot AquaSense Pro robotic pool cleaner:

1. Open the Robot Cover: Locate and open the top cover of your Beatbot AquaSense Pro robotic pool cleaner.
2. Remove Existing Kit (if any): If an old clarifying agent kit is present, carefully remove it. Remove the protective cap from the new AquaRefine cartridge.
3. Падрыхтуйце картрыдж: Tear off the aluminum film from the interface of the new AquaRefine cartridge.
4. Усталюйце картрыдж: Insert the AquaRefine cartridge into the designated slot within the AquaSense Pro robot. Ensure the interface faces downwards and press firmly until you hear a "click," indicating it is securely in place.
5. Зачыніце вечка: Close the top cover of the AquaSense Pro robot.

Image: A Beatbot AquaRefine kit cartridge is shown securely installed within the top compartment of a Beatbot AquaSense Pro robotic pool cleaner.

Image: A four-step diagram illustrating the installation process: 1. Opening the robot cover, 2. Removing the kit cap, 3. Tearing off the film, and 4. Installing the kit into the robot.

5. Аперацыя

Once the AquaRefine Kit is installed, the Beatbot AquaSense Pro will automatically dispense the clarifying agent during its cleaning cycles.

1. Initiate Cleaning: Place your AquaSense Pro robot into the pool and start a cleaning cycle as you normally would.
2. Automatic Dispersion: The robot will automatically release the clarifying agent into the water as it cleans, ensuring even distribution.
3. Маніторынг: You can monitor the usage and remaining life of the clarifying agent through the Beatbot app (if applicable to your AquaSense Pro model).
4. Рэкамендаванае выкарыстанне: For optimal results, it is generally recommended to use the clarifying agent weekly. A single 300ml kit can last approximately one month with weekly use, cleaning an average of 99,000 gallons of water.

Image: A Beatbot AquaSense Pro robotic pool cleaner is shown submerged in a pool, actively dispensing clarifying agent into the water, creating a visible plume.

6. Тэхнічнае абслугоўванне

• Замена картрыджа: Replace the AquaRefine cartridge when it is empty or when indicated by the Beatbot app.
• Robot Cleaning: Regularly clean your AquaSense Pro robotic pool cleaner, including its filters and brushes, to ensure optimal performance and prevent buildup.
• захоўванне: Store unused AquaRefine kits in their original packaging in a cool, dry place.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

• Назва прадукту: Beatbot AquaRefine Kit
• мадэль: Clarifying Agent Kit for Aquasense pro
• Сумяшчальнасць: Exclusively with Beatbot AquaSense Pro robotic pool cleaner
• Склад: Natural formula made from recycled crab shells, 100% biodegradable, non-toxic.
• Эфектыўнасць: Clears cloudy water, removes dirt, oils, residue, iron, and manganese. Enhances debris filtration.
• Сумяшчальнасць з пулам: Suitable for saltwater, chlorine, in-ground, and above-ground pools. Does not affect pH levels.
• Дысперсія: Automatic via AquaSense Pro.
• Kit Volume: 300ml (typical, may vary)
• Прыблізны тэрмін службы: Approximately one month with weekly use (for 300ml kit).
• Вага прадмета: 0.99 кілаграма (2.18 фунта)
• Памеры прадукту: 10 х 6.7 х 4.7 цалі
• вытворца: Бітбот
• UPC: 683125136184

Image: The Beatbot AquaRefine kit is shown alongside people enjoying a clean pool, emphasizing its skin and environment-friendly composition from recycled crab shells and its natural, biodegradable, non-toxic properties.

9. Гарантыя і падтрымка

The Beatbot AquaRefine Kit comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty information provided with your Beatbot AquaSense Pro robotic pool cleaner or contact Beatbot customer service directly.

For further assistance, visit the official Beatbot webсайт або звярніцеся да іх каналаў падтрымкі кліентаў.