Кіраўніцтва карыстальніка для ручнога лазернага вымяральніка магутнасці HLP-200B

1. Уводзіны

The BLUETIMES HLP-200B Handheld Laser Power Meter is a high-precision, portable device designed for measuring the output power of CO2 lasers. It is suitable for use with laser engraving systems, CO2 laser cutters, and any system that includes a CO2 laser tube, with a testing range between 0.1W and 200W. Its compact, pocket-sized design ensures ease of use and portability, providing accurate measurements traceable to NIST absolute standards.

Figure 1: BLUETIMES HLP-200B Handheld Laser Power Meter.

2. Інфармацыя па бяспецы

Always prioritize safety when working with lasers. This device measures laser power, and direct exposure to laser beams can cause severe injury. Follow all safety guidelines provided by your laser system manufacturer.

• Абарона вачэй: Always wear appropriate laser safety goggles when operating or measuring laser systems.
• Пазбягайце прамога ўздзеяння: Never look directly into the laser beam or allow it to strike unprotected skin.
• Правільнае абыходжанне: Handle the power meter carefully. Do not drop or expose it to excessive force.
• Умовы навакольнага асяроддзя: Use the device in a stable environment, free from excessive dust, moisture, or extreme temperatures.
• Бяспека акумулятара: Ensure correct battery polarity during installation. Do not mix old and new batteries or different battery types.

3. Усталёўка і ўстаноўка батарэі

The HLP-200B requires a 3V CR2032 lithium battery (not included). A precision flat head screwdriver is also required for installation.

3.1 Кампаненты звышview

Figure 2: Key components and dimensions of the HLP-200B.

• Плошча вымярэння: The circular area at the top where the laser beam is directed.
• Кнопка Пуск: The blue button used to initiate a measurement.
• Экран лічбавага дысплея: Shows the measured power value.
• Крышка акумулятара: Размяшчаецца ў ніжняй частцы прылады.

3.2 Этапы ўстаноўкі батарэі

1. Locate the screw at the bottom of the device. Use a precision flat head screwdriver to unscrew it and remove the battery cover.
2. Determine the positive and negative directions of the CR2032 battery. The positive (+) side is typically marked and should face upwards.
3. Insert the 3V CR2032 lithium battery into the battery compartment with the positive pole facing upwards.
4. Замяніце крышку батарэйнага адсека і надзейна закруціце шрубу.

For a visual guide on battery installation, please refer to the official product video below:

4. Інструкцыя па эксплуатацыі

The HLP-200B is designed for straightforward operation to provide quick and accurate laser power measurements.

4.1 Powering On and Initial State

• After battery installation, the device is ready for use.
• Ensure the laser power supply's red light is on and wait for approximately 30 seconds before turning on the power meter.
• Press the blue "Start" button. The digital display screen will show a dashed line, indicating it is ready for measurement. The meter will flash 2-3 times before it is ready.

Figure 3: Display showing dashed line, indicating readiness for measurement.

4.2 Вымярэнне

1. Carefully align the center of the power meter's measurement area with the laser beam's light spot.
2. Hold the meter steady in the laser path.
3. The device will emit a beeping sound, and the measured power value will appear on the LCD screen.
4. Once the reading is stable, remove the power meter from the laser path.

Figure 4: Accurate measurement of laser power with clear LCD display.

4.3 Important Measurement Tips

• There should be an interval of 20-60 seconds between two consecutive measurements. This allows the measuring point to cool down completely, ensuring accurate readings.
• Always follow the precautions outlined in this manual and any accompanying video tutorials to maintain measurement accuracy.

4.4 Аўтаматычнае адключэнне

The HLP-200B features an automatic power-off function to conserve battery life. Approximately 7 seconds after the final accurate power reading is displayed and the device is removed from the laser path, it will power off automatically.

5. Тэхнічнае абслугоўванне

• Уборка: Use a soft, dry cloth to clean the exterior of the device. Do not use abrasive cleaners or solvents. Keep the measurement area free from dust and debris.
• захоўванне: Store the power meter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.
• Пазбягайце ўздзеяння: Protect the device from drops and impacts, which can damage internal components and affect calibration.

6. Выпраўленне непаладак

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please contact BLUETIMES customer service through the retailer where the product was purchased or visit the official BLUETIMES store on Amazon: BLUETIMES Store.

Калі ласка, захавайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.