aigo AF12 3-in-1 ARGB Fan Kit Instruction Manual

Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AF12 3-in-1 ARGB Fan Kit. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

Асаблівасці прадукту

The aigo AF12 3-in-1 ARGB Fan Kit offers efficient cooling and customizable lighting for your computer system. Key features include:

• мадэль: AF123IN1-BK
• Колькасць вентылятара: 3 x 120mm fans
• Хуткасць вентылятара: 800-2000 абаротаў у хвіліну (±10%)
• Fan Noise Level: ≤30 дБА
• Паток паветра: 86.6 CFM
• Статычны ціск: 1.27mm-H²O
• Working Current (Motor): ≤0.2A (12V)
• Working Current (Light): ≤0.48A (5V)
• Памеры: 120 х 120 х 25 мм
• ARGB-падсветка: Addressable RGB lighting for customizable effects.

Змест пакета

Праверце, ці ёсць у вашай упакоўцы ўсе пералічаныя ніжэй прадметы:

• 3 x aigo AF12 ARGB Fans
• Крапежныя шрубы
• ARGB Controller (if included in kit)
• Cables (Power, ARGB Sync)

Кіраўніцтва па ўстаноўцы

Follow these steps to properly install your aigo AF12 ARGB fans into your computer case.

1. Падрыхтуйце сваю сістэму: Power off your computer and disconnect it from the power source. Open your computer case.
2. Вызначце месцы мантажу: Determine the desired locations for your fans (e.g., front, top, rear, bottom of the case). Ensure proper airflow direction.
3. Усталюйце вентылятары: Position each fan in its chosen location. Use the provided mounting screws to secure the fans to the case. Ensure the fan blades are not obstructed.
   

   Image: An aigo AF12 fan viewed from an angle, highlighting the mounting points on its corners. This illustrates how the fan is secured.
4. Падключэнне кабеляў харчавання: Connect the 3-pin power connector from each fan to an available fan header on your motherboard or fan controller.
5. Падключэнне кабеляў ARGB: Connect the ARGB cable from each fan to the ARGB controller (if applicable) or directly to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct pin orientation to avoid damage.
   

   Выява: Пабочны прафесіяналfile of the aigo AF12 fan, illustrating the thickness and potential locations for cable connections on the frame.

6. Кабельнае кіраванне: Route cables neatly to prevent interference with other components and to improve airflow.
7. Зачыніце корпус і ўключыце харчаванне: Close your computer case, reconnect the power, and power on your system.

Інструкцыя па эксплуатацыі

Once installed, your aigo AF12 ARGB fans will operate automatically based on your system's fan control settings. The ARGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

Кантроль хуткасці вентылятара

Fan speed can typically be adjusted through your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions.

Кіраванне асвятленнем ARGB

If connected to a 5V 3-pin ARGB header on your motherboard, use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.

If using a dedicated ARGB controller (often included with fan kits), refer to the controller's specific instructions for lighting adjustments.

Тэхнічнае абслугоўванне

Regular maintenance ensures optimal performance and extends the lifespan of your fans.

• Ачыстка ад пылу: Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• Праверка кабеля: Verify that all cables are securely connected and free from damage.
• Маніторынг шуму: Listen for unusual noises, which may indicate a fan bearing issue or obstruction.

Ліквідацыю непаладак

If you encounter issues with your aigo AF12 ARGB fans, refer to the following common solutions:

Вентылятары не круцяцца

• Праверце падключэнне сілкавання: Ensure the fan's 3-pin power connector is securely plugged into the motherboard or controller.
• Check BIOS Settings: Verify that fan headers are enabled in your motherboard's BIOS/UEFI settings.
• Test Another Header: Try connecting the fan to a different fan header to rule out a faulty header.

ARGB Lights Not Working

• Check ARGB Connection: Ensure the 5V 3-pin ARGB connector is correctly and securely plugged into the motherboard or controller. Verify the pin orientation.
• Праверце праграмнае забеспячэнне: Confirm that your motherboard's ARGB software is installed and configured correctly.
• Сумяшчальнасць: Ensure your motherboard has a compatible 5V 3-pin ARGB header. This product is not compatible with 12V 4-pin RGB headers.

Празмерны шум

• Праверце наяўнасць перашкод: Пераканайцеся, што ніякія кабелі або іншыя кампаненты не дакранаюцца лапатак вентылятара.
• Мантажныя шрубы: Verify that all mounting screws are tightened to prevent vibrations.
• Назапашванне пылу: Clean any dust from the fan blades.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

This aigo product comes with a Гарантыя 12 месяцаў з даты пакупкі, пакрываючы вытворчыя дэфекты.

For technical support, warranty claims, or further assistance, please visit the official aigo store or contact their customer service through the details provided on their webсайт.

Official aigo Store: aigo Store on Amazon