CONTEC TP500

CONTEC TP500(LED) Non-Contact Infrared Thermometer User Manual

Model: TP500 | Brand: CONTEC

1. Уводзіны

This manual provides essential instructions for the safe and effective operation of the CONTEC TP500(LED) Non-Contact Infrared Thermometer. This device is designed for accurate and rapid temperature measurement without physical contact, suitable for infants, children, and adults. Please read this manual thoroughly before use and retain it for future reference.

CONTEC TP500 Medical Infrared Thermometer on a wooden table with a plant in the background.

Figure 1: CONTEC TP500(LED) Non-Contact Infrared Thermometer.

2. Інфармацыя па бяспецы

  • Не апускайце тэрмометр у ваду ці іншыя вадкасці.
  • Трымайце прыладу далей ад прамых сонечных прамянёў, экстрэмальных тэмператур і высокай вільготнасці.
  • Не кідайце прыладу і не падвяргайце яе моцным ударам.
  • Не спрабуйце разбіраць або рамантаваць прыладу самастойна. Звярніцеся ў службу падтрымкі кліентаў, калі патрабуецца абслугоўванне.
  • Трымайце батарэйкі ў месцах, недаступных для дзяцей. Утылізуйце выкарыстаныя батарэйкі належным чынам у адпаведнасці з мясцовымі правіламі.
  • This device is intended for household use. Consult a medical professional for any health concerns or persistent fever.
  • Ensure the measurement probe is clean before each use to maintain accuracy and hygiene.

3. Асаблівасці прадукту

  • Бескантактнае вымярэнне: Measures temperature without physical contact, reducing discomfort and potential cross-contamination.
  • Precise Infrared Probe: Utilizes an advanced infrared sensor for accurate and rapid temperature readings within 1 second.
  • Вялікі святлодыёдны дысплей: Clear and easy-to-read LED display, visible even in low light conditions or at night.
  • Функцыя памяці: Stores up to 30 groups of measurement values, allowing for easy tracking of temperature trends.
  • Fever Warning: Intelligent sound and light prompts indicate different temperature levels (normal, low fever, high fever) for quick assessment.
  • Аўтаматычнае адключэнне: Device automatically turns off after 5 seconds of inactivity to conserve battery life.
  • Пераўтварэнне адзінак: Easily switch between Celsius (°C) and Fahrenheit (°F) as preferred.
  • Індыкатар разраду батарэі: Папярэджвае карыстальніка, калі батарэйкі патрабуюць замены.
Падрабязны view of the CONTEC TP500 LED display showing various indicators including memory pattern, sound prompt, temperature unit, low power supply, body temperature mode, and body temperature reading.

Figure 2: Understanding the display indicators.

4. Настройка

4.1 Устаноўка батарэі

  1. Знайдзіце вечка адсека для батарэек на ручцы тэрмометра.
  2. Slide or open the cover according to the indicator marks.
  3. Insert two "AAA" batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Шчыльна зачыніце вечка батарэйнага адсека, пакуль яно не зафіксуецца пачуйце пстрычку.

Note: The package does not contain batteries. Please use two new "AAA" batteries for optimal performance.

5. Інструкцыя па эксплуатацыі

5.1 Вымярэнне

  1. Ensure the thermometer is clean and dry.
  2. Press the power button to turn on the device. The LED display will light up.
  3. Position the thermometer 1-3 cm (approximately 0.4-1.2 inches) from the center of the forehead. Ensure there is no hair, sweat, or cosmetics obstructing the measurement area.
  4. Press the measurement button (trigger) once. The temperature reading will appear on the LED display within 1 second.
  5. The device will provide sound and light prompts based on the measured temperature.
  6. The measurement will be automatically saved to the device's memory.
Image showing a CONTEC TP500 thermometer being used to measure a baby's forehead temperature from a short distance of 1-3cm.

Figure 3: Proper measurement distance and placement on the forehead.

5.2 Switching Between Celsius (°C) and Fahrenheit (°F)

  1. Уключыце тэрмометр.
  2. Long press the "M" (Memory) button to enter the memory interface.
  3. While in the memory interface, long press and hold the "M" button again to enter the setting mode.
  4. Press the "M" button briefly to toggle between Celsius (°C) and Fahrenheit (°F).
  5. Once your desired unit is displayed, release the button. The setting will be saved automatically.
Graphic illustrating the conversion between Celsius and Fahrenheit units on the CONTEC TP500 thermometer with arrows indicating interchangeability.

Figure 4: Celsius and Fahrenheit unit conversion.

5.3 Функцыя памяці

The CONTEC TP500(LED) thermometer automatically stores the last 30 temperature readings. To view мінулыя вымярэнні:

  1. Уключыце тэрмометр.
  2. Briefly press the "M" (Memory) button to cycle through the stored readings. Each press will display the next stored value.
Graph showing temperature trends over three measurement points (01, 02, 03) with corresponding digital readings, illustrating the 30-set memory function.

Figure 5: Memory function displaying temperature trends.

6. Тэхнічнае абслугоўванне

6.1 Ачыстка

  • Wipe the thermometer body with a soft, slightly damp тканіна.
  • For the infrared probe, gently clean with a cotton swab lightly moistened with 70% isopropyl alcohol. Allow it to dry completely before use.
  • Не выкарыстоўвайце абразіўныя ачышчальнікі, растваральнікі і не апускайце прыладу ў ваду.

6.2 Захоўванне

  • Store the thermometer in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
  • If the device will not be used for an extended period (e.g., more than one month), remove the batteries to prevent leakage and potential damage.

7. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Прылада не ўключаецца.Батарэйкі разраджаныя або няправільна ўстаўленыя.Replace batteries with new "AAA" batteries, ensuring correct polarity.
Няправільныя паказанні.Measurement distance too far or too close; dirty probe; environmental interference.Ensure correct measurement distance (1-3 cm). Clean the infrared probe. Avoid measuring in areas with strong drafts or extreme temperature changes.
Немагчыма пераключыць адзінкі вымярэння тэмпературы.Incorrect button sequence.Follow the steps in section 5.2 carefully: Turn on, long press 'M' to memory, then long press 'M' again to setting mode, brief press 'M' to toggle.
На дысплеі адлюстроўваецца «Lo» або «Hi».Тэмпература знаходзіцца па-за межамі вымяральнага дыяпазону.Ensure the thermometer is used within its specified operating temperature range. If measuring body temperature, ensure proper placement and that the subject's temperature is within the human body temperature range.

8. Тэхнічныя характарыстыкі

  • мадэль: TP500
  • Метад вымярэння: Non-contact Infrared
  • Адлегласць вымярэння: 1-3 см
  • Дысплей: святлодыёд
  • Захоўванне памяці: 30 груп
  • Аўтаматычнае адключэнне: 5 секунд
  • Крыніца харчавання: 2 х ААА батарэі (не ўключаны)
  • Тэрмін службы батарэі: Прыкладна 600 вымярэнняў
  • Асаблівасці: Low Battery Indicator, Fever Warning
  • матэрыял: Пластыкавыя
  • колер: Белы
  • Памеры: Approximately 162mm (Height) x 113mm (Length) x 51mm (Width)
Diagram showing the dimensions of the CONTEC TP500 thermometer: 162mm height, 113mm length, and 51mm width.

Малюнак 6: Памеры вырабу.

9. Гарантыя і падтрымка

The CONTEC TP500(LED) Non-Contact Infrared Thermometer comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims, technical support, or any questions regarding the product, please contact CONTEC customer service. You can typically find contact information on the product packaging or through the official CONTEC webсайт.

For purchases made on Amazon, you may also contact the seller, CONTEC, directly through your Amazon order history for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.