XPG CORE Reactor II VE 850W Power Supply Unit User Manual

1. Уводзіны

This manual provides essential information for the installation, operation, and maintenance of your XPG CORE Reactor II VE 850W Power Supply Unit (PSU). Please read this manual thoroughly before installation and retain it for future reference. The XPG CORE Reactor II VE is an 80 Plus Gold certified power supply designed for stable and efficient power delivery to your computer system.

Image 1.1: XPG CORE Reactor II VE 850W Power Supply Unit, showcasinг яго кампактны дызайн.

2. Асноўныя магчымасці

• Сертыфікацыя 80+ Gold: Ensures high power efficiency, reducing energy waste and operating costs.
• 12V-2x6 Connector: Provides direct and efficient power delivery to critical components, enhancing system stability and performance.
• DC-DC Circuit Design: Maximizes efficiency and reliability by converting power directly to the required output voltage, reducing heat and prolonging hardware lifespan.
• Low Ripple Noise Design: Features ripple levels below 60mV at +12V and below 40mV at +5V and +3.3V, ensuring stable power delivery and minimizing electrical interference.
• >15ms Hold Up Time: Exceeds Intel's standards for uninterrupted power delivery, ensuring reliable operation under challenging conditions.
• 8 Industrial Protections: Comprehensive protection suite including Over-Voltage Protection (OVP), Under-Voltage Protection (UVP), Over-Current Protection (OCP), Short-Circuit Protection (SCP), Over-Power Protection (OPP), Over-Temperature Protection (OTP), Surge & Inrush Protection (SIP), and No Load Operation (NLO).
• Кампактная даўжыня 140 мм: Maximizes space efficiency for easy integration into various PC setups and chassis.

Image 2.1: Close-up of the 12V-2x6 connector for modern GPUs.

Image 2.2: Visual representation of the 8 industrial-grade protections.

3. Настройка і ўстаноўка

Before installing the XPG CORE Reactor II VE PSU, ensure your computer system is powered off and disconnected from the main power outlet. Refer to your PC case and motherboard manuals for specific installation instructions.

3.1 Распакаванне

Carefully remove the PSU and all included cables from the packaging. Verify that all components listed in the product documentation are present.

Image 3.1: XPG CORE Reactor II VE PSU with its modular cables.

3.2 Мантаж блока харчавання

1. Position the PSU in the designated PSU bay of your PC case.
2. Сумясціце адтуліны для шруб на блоку харчавання з адтулінамі на корпусе.
3. Замацуеце блок харчавання шрубамі, якія ўваходзяць у камплект.

3.3 Злучальныя кабелі

The XPG CORE Reactor II VE is a fully modular PSU, allowing you to connect only the cables you need. This helps improve airflow and cable management within your PC case.

Image 3.2: Modular cable connection ports on the XPG CORE Reactor II VE PSU.

• Падключыце 24-кантактны кабель ATX да матчынай платы.
• Connect the 8-pin (4+4) EPS/CPU cable(s) to your motherboard.
• Connect the 6+2 pin PCIe cables to your graphics card(s). The 12V-2x6 connector is specifically designed for modern high-power GPUs.
• Connect SATA power cables to your storage drives (HDDs/SSDs) and other SATA-powered devices.
• Connect Molex cables to any peripherals requiring them.
• Пераканайцеся, што ўсе злучэнні надзейныя і правільна ўстаноўлены.

4. Інструкцыя па эксплуатацыі

Once the PSU is installed and all components are connected, you can power on your system.

1. Ensure the power switch on the back of the PSU is in the "OFF" (0) position.
2. Connect the AC power cord to the PSU and then to a wall outlet or surge protector.
3. Flip the power switch on the PSU to the "ON" (I) position.
4. Націсніце кнопку харчавання на корпусе кампутара, каб запусціць сістэму.

The XPG CORE Reactor II VE is designed for continuous, stable operation. Its FDB 120mm fan provides efficient cooling while maintaining low noise levels.

5. Тэхнічнае абслугоўванне

Правільнае абслугоўванне забяспечвае даўгавечнасць і аптымальную прадукцыйнасць вашага блока харчавання.

• Выдаленне пылу: Periodically clean the PSU fan and ventilation grilles to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for this purpose, ensuring the system is powered off and unplugged.
• Кабельнае кіраванне: Ensure cables are neatly routed and do not obstruct airflow within the PC case.
• Умовы навакольнага асяроддзя: Operate the PSU in a well-ventilated area, away from direct sunlight, excessive heat, and moisture.

6. Выпраўленне непаладак

If you encounter issues with your XPG CORE Reactor II VE PSU, refer to the following common troubleshooting steps:

• Няма харчавання:
  • Праверце, ці надзейна падключаны шнур харчавання пераменнага току як да блока харчавання, так і да разеткі.
  • Ensure the PSU's power switch is in the "ON" (I) position.
  • Verify that the 24-pin ATX and 8-pin EPS/CPU cables are correctly seated in the motherboard.
  • Праверце разетку з дапамогай іншай прылады, каб пераканацца, што ў ёй ёсць напружанне.
• Нестабільнасць/збоі сістэмы:
  • Ensure all power connectors to components (motherboard, CPU, GPU, drives) are firmly connected.
  • Праверце на наяўнасць няшчыльных кабеляў або кароткіх замыканняў у корпусе.
  • Калі магчыма, праверце блок харчавання з іншым наборам кампанентаў або ў іншай сістэме, каб выявіць праблему.
• Празмерны шум:
  • Check if the PSU fan is obstructed by dust or cables.
  • Ensure the PSU is securely mounted to prevent vibrations.
  • If the noise persists and is unusual, contact customer support.

If troubleshooting steps do not resolve the issue, contact XPG customer support for further assistance.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

The XPG CORE Reactor II VE 850W PSU comes with a 7 гады гарантыі ад вытворцы. For warranty claims or technical support, please visit the official XPG webсайт або звярніцеся ў іх аддзел абслугоўвання кліентаў.

Каб атрымаць дадатковыя рэсурсы і інфармацыю пра прадукт, вы можаце наведаць XPG Store on Amazon.

9. Відэа пра прадукты

Below are relevant product videos for the XPG CORE Reactor II VE Power Supply Unit. These videos provide additional visual information regarding the product's features and installation.