1. Уводзіны
The DANOPLUS CO2 Controller is designed to monitor and regulate carbon dioxide levels, temperature, and humidity in various environments such as grow rooms, greenhouses, and residential spaces. Featuring dual smart outlets and a dual-beam NDIR CO2 sensor, this controller allows for precise and automated control of CO2 equipment and exhaust fans to maintain optimal atmospheric conditions.
2. Асаблівасці прадукту
- Dual Outlets Control: Two independently programmable smart outlets for CO2 equipment and exhaust fans.
- Спрошчаная ўстаноўка: Easy adjustment of high and low border values using dedicated knobs, eliminating complex calculations.
- Dual-beam NDIR CO2 Sensor: Provides accurate CO2 readings (±50ppm) with low drift. Automatically detects day and night in Plant Mode.
- 3-у-1 маніторынг: Large LCD screen displays CO2 chart, CO2 reading, temperature, and humidity.
- Шматфункцыянальны: Includes Plant Mode, Human Mode, Buzzer Alarm, Altitude Adjustment, Calibration Function, MAX/MIN reading, and CO2 Chart setting.
- Extended Sensor Cable: Comes with a 15-foot (450 cm) long sensor cable for flexible placement.
3. Змесціва ўпакоўкі
Праверце наяўнасць усіх прадметаў у камплекце:
- CO2 Controller x 1
- Remote Sensor x 1
- Шрубы x 4
- English Instruction Manual x 1
4. Настройка
- Мантаж: Choose a suitable location for the main controller unit. Use the provided screws to securely mount it to a wall or vertical surface. Ensure it is away from direct heat sources or areas with high humidity.
- Падключыце дыстанцыйны датчык: Plug the remote CO2 sensor into the designated port on the main controller unit. Position the sensor in the area where CO2, temperature, and humidity measurements are required. The 15-foot cable allows for flexible placement.
- Падключыце харчаванне: Plug the main controller unit into a standard electrical outlet.
- Падключыце прылады: Plug your CO2 equipment (e.g., CO2 generator) into the 'CO2 Equipment' outlet and your exhaust fan into the 'Exhaust FAN' outlet on the dual smart plug.
5. Інструкцыя па эксплуатацыі
The controller features a large LCD screen and two control knobs for easy operation.
5.1 Setting Border Values (HI and LOW)
The controller uses two knobs, BORDER HI and BORDER LOW, to set the CO2 thresholds for activating connected devices.
- Set BORDER LOW Value: Rotate the BORDER LOW knob. The value will flash. Adjust to your desired low CO2 threshold. Press the knob again to save and exit.
- Set BORDER HI Value: Rotate the BORDER HI knob. The value will flash. Adjust to your desired high CO2 threshold. Press the knob again to save and exit.
5.2 Advanced Settings and Modes
The following video demonstrates how to access and adjust various advanced settings and operating modes:
General Steps for Advanced Settings (as shown in video):
- Націсніце МЕНЮ button repeatedly until the desired setting (e.g., ADV, BUZZ, ALTI, CALI, °C/°F) blinks.
- Прэса УВОД to access the setting.
- Павярнуць BORDER Low or BORDER Hi knob (as indicated) to adjust the value or switch modes.
- Прэса УВОД to confirm and exit. For some settings like Plant Mode (PL), Human Mode (HU), or Factory Reset (RES), you may need to press and hold УВОД на працягу 3 секунд, каб актываваць.
5.3 Plant Mode Application
In Plant Mode, the controller optimizes CO2 levels for plant growth. CO2 supplementation can enhance photosynthesis, increase growth and yield, improve water use efficiency, and strengthen resistance to pests and diseases.
5.4 Human Mode Application
In Human Mode, the controller helps maintain safe CO2 levels for human occupancy. High CO2 levels can lead to discomfort, drowsiness, and health issues in enclosed spaces.
6. Дадаткі
The DANOPLUS CO2 Controller is suitable for a wide range of applications:
- Цяпліцы
- Нумары Grow
- Hydroponics Setups
- Mushroom Farms
- Жылыя дамы
- Гаспадарчыя будынкі
- Лабараторыі
- Трэнажорныя залы
- Канферэнц-залы
7. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Марка | ДАНОПЛЮС |
| Нумар мадэлі | DP-419_US |
| Тып дысплея | ВК |
| Памеры прадукту | 4.92 х 4.33 х 1.37 цалі (12.5 х 11 х 3.5 см) |
| Вага прадмета | 1.54 фунта (700 г) |
| тtage | 12 В (пастаянны ток) |
| Матэрыял | Акрыланітрылбутадыенстырол (АБС) |
| Дыяпазон вымярэння CO2 | 0-5000 частак на мільён |
| CO2 Дакладнасць | ±50ppm or ±5% of reading (0-3000ppm); ±7% (over 3000ppm) |
| CO2 Repeatability | 20ppm at 400ppm (standard of 10 readings in 1 minute) |
| Дазвол CO2 | 1ppm (0-1000); 5 старонак у хвіліну (1000-2000); 10 старонак у хвіліну (> 2000) |
| Даўжыня кабеля датчыка | 15 футаў (450 см) |
8. Тэхнічнае абслугоўванне
To ensure optimal performance and longevity of your DANOPLUS CO2 Controller, follow these maintenance guidelines:
- Уборка: Regularly wipe the main unit and remote sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the display or housing.
- Сыход за датчыкам: Keep the remote sensor free from dust, debris, and moisture. Avoid placing it in areas where it might be exposed to direct water spray or extreme temperatures.
- Каліброўка: The NDIR CO2 sensor is designed for low drift. If you suspect inaccurate readings, refer to the advanced settings in the operating instructions (Video 5.1) for calibration procedures.
- захоўванне: If storing the device for an extended period, disconnect it from power, clean it thoroughly, and store it in a cool, dry place away from direct sunlight.
9. Выпраўленне непаладак
If you encounter issues with your CO2 Controller, refer to the following common troubleshooting steps:
- Няма харчавання: Ensure the power cord is securely plugged into both the controller and a functional electrical outlet. Check the power source.
- Inaccurate CO2 Readings: Verify the remote sensor is clean and properly connected. Ensure it is not placed in an area with poor air circulation or near a direct CO2 source/sink that might skew readings. Consider performing a calibration if available (refer to Video 5.1).
- Devices Not Activating/Deactivating: Check that the CO2 equipment and exhaust fan are correctly plugged into the respective smart outlets. Review your BORDER HI and BORDER LOW settings to ensure they are within the desired operating range. Confirm the controller is in the correct operating mode (Plant Mode or Human Mode).
- Buzzer Alarm Issues: If the alarm is not sounding or sounding unexpectedly, check the buzzer alarm settings (refer to Video 5.1) to ensure it is enabled and configured correctly.
- Дысплей не працуе: If the LCD display is blank or malfunctioning, try power cycling the device. If the issue persists, contact customer support.
- Скід да заводскіх налад: If settings become erratic or you wish to return to default configurations, perform a factory reset (refer to Video 5.1).
10. Гарантыя і падтрымка
For warranty information, technical support, or service inquiries, please contact DANOPLUS customer service through the retailer where the product was purchased or visit the official DANOPLUS website. Keep your purchase receipt and model number (DP-419_US) handy for faster service.
You can also find additional resources and software updates at cd50.net/419/.