Rebel Electro RBA-4501

Rebel Brett SUP Inflatable Stand-Up Paddleboard with Kayak Seat 350 cm - User Manual

Model: RBA-4501 | Brand: Rebel Electro

Уводзіны

Thank you for choosing the Rebel Brett SUP. This inflatable stand-up paddleboard is designed for versatility and performance, featuring Drop-Stitch technology for rigidity and a comfortable EVA deck. It comes complete with a kayak seat, adjustable paddle, pump, and transport backpack, making it ideal for touring and recreational paddling. Please read this manual carefully before use to ensure proper setup, safe operation, and optimal maintenance of your SUP.

Змест пакета

Праверце, ці ўсе пералічаныя ніжэй прадметы ўваходзяць у вашу ўпакоўку:

  • 1x Inflatable Stand-Up Paddleboard (SUP)
  • 1x Removable Slide-in Fin
  • 1x Leash
  • 1x Adjustable 4-piece Paddle
  • 1x Kayak Seat
  • 1x Hand Pump with Pressure Gauge
  • 1x Transport Backpack
  • 1x камплект для рамонту
Rebel Brett SUP complete package including paddleboard, paddle, pump, fin, leash, kayak seat, and repair kit.

Выява: Зверхуview of the Rebel Brett SUP complete package, showing all included components.

Інструкцыя па наладзе

1. Inflating the SUP

  1. Unroll the SUP on a clean, flat surface, free from sharp objects.
  2. Locate the inflation valve, typically at the tail of the board. Ensure the valve pin is in the UP position (closed) to prevent air from escaping after inflation.
  3. Attach the hose of the hand pump to the valve by twisting it clockwise until secure.
  4. Begin pumping. The pressure gauge will start to show a reading once the board gains some rigidity. Inflate the board to the recommended pressure of 12-15 PSIНе перапампоўвайце.
  5. Пасля дасягнення патрэбнага ціску хутка адлучыце шланг помпы і замацуеце вечка клапана.
Rebel Electro hand pump with pressure gauge.

Image: The included hand pump, essential for inflating the SUP to the correct pressure.

2. Мацаванне плаўніка

The SUP comes with a removable slide-in fin for improved tracking and stability.

  1. Locate the fin box at the bottom rear of the board.
  2. Slide the fin into the fin box, ensuring it clicks securely into place.
  3. To remove, press the release tab and slide the fin out.
Close-up of the Rebel Brett SUP fin box and fin.

Image: Detail of the fin box and the removable slide-in fin.

3. Зборка вясла

The 4-piece adjustable paddle can be configured for stand-up paddling or kayaking.

  1. Connect the paddle sections by aligning the buttons with the holes and pushing them together until they click.
  2. Adjust the paddle length to your height. For stand-up paddling, the paddle handle should reach your wrist when your arm is extended overhead. Secure the adjustment clamp.
  3. For kayak use, attach the second blade section instead of the handle.
Adjustable 4-piece paddle for Rebel Brett SUP, showing length adjustment.

Image: The adjustable paddle, demonstrating its length customization for different users and paddling styles.

4. Мацаванне сядзення для каяка

The included kayak seat provides additional comfort and versatility.

  1. Locate the D-rings on the SUP deck, designed for seat attachment.
  2. Clip the straps of the kayak seat to the corresponding D-rings.
  3. Adjust the strap length to achieve a comfortable and secure seating position.
Rebel Brett SUP with kayak seat attached.

Image: The Rebel Brett SUP with the kayak seat installed, ready for use.

Close-up of the Rebel Brett SUP kayak seat.

Выява: Падрабязны view of the comfortable kayak seat with backrest.

Інструкцыя па эксплуатацыі

Бяспека перш за ўсё

  • Always wear a personal flotation device (PFD) when using the SUP.
  • Attach the leash to your ankle and the D-ring at the tail of the board. This keeps the board close if you fall off.
  • Check weather conditions and water currents before heading out. Avoid strong winds and currents.
  • Do not exceed the maximum user weight of 140 kg (maximum load 170 kg).
  • Inform someone of your paddling plans and expected return time.
Rebel Brett SUP leash attached to an ankle.

Image: The coiled leash, an essential safety accessory to keep the board tethered to the user.

Тэхніка веславання

Устаючы: Start by kneeling on the board with your hands on either side. Slowly stand up one foot at a time, placing your feet shoulder-width apart over the center of the board. Keep your knees slightly bent and your core engaged for balance.

Paddling Stroke: Hold the paddle with one hand on the top of the handle and the other on the shaft. Insert the blade fully into the water near the nose of the board and pull it back towards your feet. Use your core muscles, not just your arms. Alternate sides to maintain a straight course.

Паварот: To turn, paddle on one side only, or perform a sweep stroke by paddling in a wide arc away from the board. For sharper turns, step back on the tail of the board to lift the nose slightly.

Person paddling the Rebel Brett SUP on calm water from an aerial view.

Выява: паветраная антэнная view of a person enjoying the Rebel Brett SUP on the water, demonstrating typical use.

Тэхнічнае абслугоўванне

Уборка

After each use, especially in saltwater, rinse the SUP, paddle, and all accessories with fresh water. Use mild soap and water for stubborn dirt. Ensure all components are thoroughly dry before storage to prevent mold and mildew.

Захоўванне

Deflate the SUP by pressing the valve pin down and allowing the air to escape. Roll the board tightly from the nose to the tail, expelling all air. Store the deflated board and accessories in the transport backpack in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid folding the board sharply.

Repair Kit Usage

The included repair kit is for minor punctures. Clean and dry the damaged area. Apply adhesive (not included, typically PVC glue) to both the patch and the board, then firmly press the patch over the hole. Allow sufficient drying time before reinflating.

Rebel Brett SUP repair kit components: patches and valve wrench.

Image: Contents of the repair kit, including patches and a valve wrench for maintenance.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
SUP loses air quicklyValve not properly closed or cap loose; Puncture in board.Ensure valve pin is in UP position and cap is tight. Check for leaks using soapy water; repair with patch kit if puncture found.
Цяжкасць напампоўванняValve pin in DOWN position (open); Pump hose not securely attached.Ensure valve pin is in UP position. Re-attach pump hose securely.
Board feels unstableUnder-inflated; Fin not properly attached.Inflate to recommended PSI (12-15 PSI). Ensure fin is securely clicked into place.
Paddle sections won't connect/disconnectDirt or sand in connection points; Button stuck.Rinse and clean connection points. Press button firmly while pulling/pushing.

Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Даўжыня350 см
Шырыня81 см
Таўшчыня15 см
Вага10 кг
Водазмяшчэнне185 - 14 300 літраў
Рэкамендуемы ціск12-15 PSI
Drop Stitch Thread Density27,000 м²
ТыпГастролі
Максімальная нагрузка170 кг
Максімальная вага карыстальніка140 кг
Board ConstructionАднапалатны
Paddle MaterialАлюміній
Даўжыня вясла205 ~ 225 см
Paddle Shaft Diameter2.9 см
Плаўнік МатэрыялНейлон
Fin Height22 см
Leash Length/Weight3.04 m, 126 g
Kayak Seat MaterialПоліэстэр, нейлон
Kayak Seat Backrest Dimensions51 х 45 см
Kayak Seat Sitting Area Dimensions37 х 31 см

Гарантыя і падтрымка

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Rebel Electro directly through their official website or authorized retailers. Keep your proof of purchase for any warranty claims.

© 2024 Rebel Electro. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.