Aquasonic FLOS ICON

AquaSonic Icon Water Flosser Instruction Manual

Model: FLOS ICON

1. Інфармацыя па бяспецы

WARNING: Do not use in the shower or near water. Keep away from children. Do not use if you have any medical conditions affecting your teeth, gums, or mouth, or if you are using any medication that affects oral health. Always follow the instructions for proper use and maintenance. In case of contact with water, immediately unplug and dry the device before use.

Юрыдычная заўвага: Заявы адносна харчовых дабавак не былі ацэнены FDA і не прызначаны для дыягностыкі, лячэння, вылечвання або прафілактыкі якіх-небудзь захворванняў або станаў здароўя.

2. Прадукт скончыўсяview

The AquaSonic Icon Water Flosser is a cordless, rechargeable oral irrigator designed for superior and gentle dental cleaning. It utilizes advanced technology to clean between teeth and along the gumline, promoting a fresher, healthier smile. Its sleek and portable design makes it ideal for both home and travel use.

Відэа: Скончанаview of the AquaSonic Icon Water Flosser, showcasinяго асаблівасці і дызайн.

Асноўныя характарыстыкі:

  • Dentist-Recommended Technology: Uses advanced technology for superior and gentle oral care, cleaning teeth more effectively than traditional string floss.
  • 3 рэжыму зубной ніткі: Offers customizable cleaning with Normal, Soft, and Pulse modes to suit individual needs and gum sensitivity.
  • Працяглая акумулятарная батарэя: Equipped with a lithium-ion battery providing 90+ days of flossing on a single charge.
  • Sleek & Travel-Friendly Design: Modern, compact, and lightweight, making it perfect for travel and easy storage.
  • Воданепранікальны: Designed for safe use in wet environments.
  • Наканечнік, які верціцца на 360°: Забяспечвае лёгкі доступ да ўсіх участкаў ротавай поласці.
  • Leak-Proof, Easy-to-Fill Water Tank: Designed for convenience and hygiene.
AquaSonic Icon Water Flosser showing ultimate deep clean features

Image: The AquaSonic Icon Water Flosser highlighting its 'Ultimate Deep Clean' capabilities, including faster cleaning than string floss, ultra-fine jet stream for hard-to-reach areas, and improved gum health.

AquaSonic Icon Water Flosser showcasing modern design and technology

Image: The AquaSonic Icon Water Flosser illustrating its modern design, 3 flossing modes, powerful rechargeable battery (90+ days), textured non-slip grip, 360° rotating tip, and leak-proof, easy-to-fill water tank.

3. Што ў скрынцы

Your AquaSonic Icon Water Flosser package includes:

  • 1 x AquaSonic Icon Water Flosser unit
  • 1 x Jet Tip
  • 1 x Charge Cord

4. Настройка

4.1. Зарадка прылады

  1. Locate the charging port on the front of the device, usually covered by a rubber flap.
  2. Open the rubber flap and insert the provided charge cord.
  3. Connect the other end of the charge cord to a suitable USB power adapter (not included) or a USB port.
  4. Allow the device to fully charge before first use. The charging indicator lights will show charging status.
AquaSonic Icon Water Flosser showing easy to use features like charging port and removable tank

Image: The AquaSonic Icon Water Flosser illustrating its easy-to-use features, including a simple 2-button operation, removable tank for easy cleaning, easy-access tank door for quick filling, and the charging port.

4.2. Напаўненне рэзервуара для вады

  1. Пераканайцеся, што прылада выключана.
  2. Locate the water tank at the back of the flosser.
  3. Open the easy-access tank door or detach the entire tank from the main unit.
  4. Fill the tank with lukewarm water. You may also add a small amount of mouthwash, diluted with water, for an enhanced cleaning experience.
  5. Close the tank door securely or reattach the tank to the unit, ensuring it clicks into place.
AquaSonic Icon Water Flosser demonstrating ultimate convenience and tank filling

Image: The AquaSonic Icon Water Flosser showcasing its ultimate convenience as a travel-friendly, portable, and lightweight device, along with a visual of its large tank being filled for flossing on a single fill.

4.3. Attaching the Jet Tip

  1. Insert the desired jet tip into the opening at the top of the flosser handle until it clicks securely.
  2. To remove the tip, press the tip release button (usually located near the tip opening) and pull the tip out.

5. Інструкцыя па эксплуатацыі

5.1. Выбар рэжыму

  1. Press the 'Mode' button to cycle through the available flossing modes:
    • Нармальны: Standard cleaning mode for daily use.
    • Мяккі: Мяккі рэжым для адчувальных зубоў і дзёсен.
    • Пульс: Massages gums for improved circulation.
  2. The indicator lights on the device will show the currently selected mode.
AquaSonic Icon Water Flosser showing 3 custom flossing modes

Image: The AquaSonic Icon Water Flosser displaying its three custom flossing modes: Normal (standard cleaning), Soft (gentle for sensitive teeth & gums), and Pulse (massages gums). It also notes it's safe for braces, bridges, and other dental work.

5.2. Flossing Your Teeth

  1. Lean over a sink and place the jet tip into your mouth, pointing it towards your teeth and gumline.
  2. Close your lips slightly around the tip to prevent splashing, but allow water to flow into the sink.
  3. Press the 'On/Off' button to start the water flow.
  4. Guide the water jet along your gumline and between your teeth. For optimal cleaning, aim the tip at a 90-degree angle to the gumline.
  5. Move the tip slowly from tooth to tooth, pausing briefly between each tooth.
  6. Continue until you have cleaned all areas of your mouth. The device will typically run for a set duration or until the water tank is empty.
  7. Press the 'On/Off' button again to turn off the device.

6. Тэхнічнае абслугоўванне

6.1. Ачыстка рэзервуара для вады

  1. Пасля кожнага выкарыстання злівайце рэшткі вады з бака.
  2. Detach the water tank from the unit.
  3. Старанна прамыйце бак чыстай вадой.
  4. Allow the tank to air dry completely before reattaching it or storing the device to prevent mold and mildew buildup.

6.2. Cleaning the Jet Tip

  1. Remove the jet tip from the device.
  2. Rinse the tip under running water.
  3. For deeper cleaning, you may soak the tip in a solution of 2 parts water to 1 part white vinegar for 5-10 minutes, then rinse thoroughly.
  4. Replace jet tips every 3 months or sooner if they show signs of wear.

6.3. Ачыстка галоўнага блока

  1. Працярыце знешні выгляд прылады мяккай, damp тканіна.
  2. Не апускайце асноўны блок у ваду.

7. Выпраўленне непаладак

7.1. Прылада не ўключаецца

  • Пераканайцеся, што прылада цалкам зараджана. Падключыце яе да зараднай прылады і дайце ёй дастаткова часу для зарадкі.
  • Check that the power button is pressed firmly.

7.2. Weak Water Pressure

  • Ensure the water tank is filled sufficiently.
  • Check that the jet tip is securely attached and not clogged. Remove and clean the tip if necessary.
  • Verify that the selected flossing mode is appropriate (e.g., 'Normal' or 'Pulse' for stronger pressure).

7.3. Leaking

  • Ensure the water tank is correctly and securely attached to the main unit.
  • Check that the tank door is fully closed.
  • Verify that the charging port's rubber flap is properly sealed when not charging.

7.4. Tip Breaks Off

  • Always remove the jet tip when the device is not in use or when traveling to prevent accidental breakage.
  • Store tips in a safe place where they won't be knocked or dropped.

8. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Нумар мадэліFLOS ICON
МаркаАквасонік
Крыніца харчаванняПрацуе ад батарэек (1 батарэйка тыпу АА ў камплекце)
АсаблівасцьRotatable Tip
Перавагі прадуктуВыдаляе налёт
Памеры ўпакоўкі9.53 х 6.73 х 3.58 цалі
Вага прадмета15.52 унцыі
Дата першай даступнасці9 жніўня 2024 г

9. Гарантыя і падтрымка

For warranty information and customer support, please refer to the documentation included with your product at the time of purchase. You may also visit the official Aquasonic webсайт для атрымання найноўшых рэсурсаў падтрымкі і кантактнай інфармацыі.

© 2024 Aquasonic. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.