Уводзіны
Дзякуй за пакупкуasing the Mytrix M16 Leverless Arcade Controller. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly to ensure optimal performance and longevity of your controller.
Змест пакета
Праверце, ці ўсе пералічаныя ніжэй прадметы ўваходзяць у вашу ўпакоўку:
- Mytrix M16 Leverless Arcade Controller
- USB-кабель C
- Здымальнік клавішнай шапкі
- Кіраўніцтва карыстальніка
- Extra Low Profile Red Switches (x2)
- Extra Keycaps (x2)
Image: Contents of the Mytrix M16 package, including the controller, USB-C cable, keycap puller, manual, two extra switches, and two extra keycaps.
Налада і сумяшчальнасць
The Mytrix M16 controller offers wide compatibility across various platforms. Ensure your device is updated to the latest firmware for best performance.
Сістэмныя патрабаванні
- ПК: Windows 10 and above, Steam Deck, Raspberry Pi, MiSTer, Linux
- Кансолі: PS3, PS4, Nintendo Switch
- Mobile/Other: Android, iPadOS, MacOS
- Заўвага: For PlayStation 5 and Xbox consoles, an additional adapter is required (not included).
Image: Visual representation of the Mytrix M16 controller's compatibility with various platforms including PS5, PS4, PS3, PC, Switch, Steam, Arcade, and Xbox (with adapter).
Першапачатковае злучэнне
- Connect the provided USB-C cable to the controller's USB-C port.
- Connect the other end of the USB-C cable to your desired gaming platform (PC, console, etc.).
- Кантролер павінен аўтаматычна распазнавацца большасцю сумяшчальных сістэм.
Інструкцыя па эксплуатацыі
The Mytrix M16 features a GP-2040-CE chip for ultra-low latency and various control modes.
Рэжымы кіравання
The controller supports multiple input modes:
- Рэжым X-ўводу
- Пераключыць рэжым
- PS3/D-input mode
- Рэжым PS4
- Рэжым клавіятуры
Button Layout and Key Values
Refer to the diagram and table below for the standard button layout and corresponding key values across different modes.
Image: Diagram showing the button layout of the Mytrix M16 controller and a table detailing key values for XInput, Switch, PS4/PS3, DInput, Arcade, and RP2040 modes.
Спецыяльныя функцыі
- Функцыя турба: Activates rapid fire for selected buttons. Consult the web configuration for specific setup.
- SOCD Cleaning Modes: Supports various Simultaneous Opposite Cardinal Direction cleaning modes to prevent conflicting directional inputs. Configurable via web інтэрфейс.
- M1/M2 Custom Buttons: Two customizable buttons for advanced control.
RGB асвятленне
The controller features customizable RGB lighting with 4 preset modes.
Image: The Mytrix M16 controller displaying various RGB backlight colors, illustrating the 4 preset modes.
Custom RGB Lighting Controls
Adjust RGB lighting using the following button combinations:
- SELECT + START + X: Наступная анімацыя
- SELECT + START + Y: Папярэдняя анімацыя
- SELECT + START + A: Павышэнне яркасці
- SELECT + START + B: Зніжэнне яркасці
- SELECT + START + RB: Параметр святлодыёда ўверх
- SELECT + START + RT: Параметр святлодыёда ўніз
- SELECT + START + LB: Націснуты параметр уверх
- SELECT + START + LT: Націснуты параметр
Image: A visual guide to customizing RGB lighting on the Mytrix M16 controller, showing various color options and control combinations.
Maintenance and Customization
The Mytrix M16 is designed for easy maintenance and extensive customization.
Пераключальнікі з магчымасцю гарачай замены
The controller uses Gateron Low Profile Red Switches, which are hot-swappable. This allows you to replace switches without soldering.
- Тып пераключальніка: Gateron Low Profile Чырвоныя перамыкачы
- Працягласць жыцця: 50 мільёна
- Сіла спрацоўвання: Прыкладна 45г
- Адлегласць шляху: 3.2 мм
- Пункт спрацоўвання: 1.5 мм
Выява: Крупны план view of the Gateron Low Profile Red Switches on the Mytrix M16 controller, highlighting their hot-swappable nature.
Detachable 7-Layer Design
The controller features a 7-layer detachable board design, enabling customization of the keyboard's graphics and internal components.
Выява: Разабраная view of the Mytrix M16 controller, showing its 7-layer detachable design for customization, including ABS keycaps, acrylic sheets, switches, and PCB board.
DIY Screen & Artwork Support
Personalize your controller with custom artwork and screen displays.
Малюнак: Examples of custom artwork and screen displays on the Mytrix M16 controller, demonstrating DIY customization possibilities.
Генеральная ўборка
To clean your controller, use a soft, dry cloth. Avoid abrasive cleaners or solvents. For deeper cleaning, the detachable layers allow access to internal components.
Ліквідацыю непаладак
This section addresses common issues you might encounter with your Mytrix M16 controller.
Праблемы з падключэннем
- Controller not detected: Ensure the USB-C cable is securely connected to both the controller and the device. Try a different USB port or cable.
- No data flow: If the controller powers on but is not recognized by any system (Windows, PopOS, consoles), attempt to access the web канфігуратар.
Web Configuration Access
The Mytrix M16 features a built-in embedded web configuration interface for advanced settings and firmware updates.
- Трымай СТАРТ button while plugging the device into your computer.
- The controller should enter a special mode, often displaying an IP address on its small screen.
- Адкрыйце a web browser on your computer and navigate to the displayed IP address.
- If the browser times out or no device is connected, ensure your computer's network settings allow connection to local devices.
Double Inputs or Unresponsive Buttons
- Double inputs: This can sometimes be caused by outdated firmware. Access the web configurator to check for and install the latest firmware updates.
- Кнопкі не рэагуюць: The controller supports hot-swappable switches. If a specific button is unresponsive, try replacing its switch with one of the included spares using the keycap puller.
Абнаўленне прашыўкі
Firmware updates are crucial for optimal performance and resolving potential issues. The Mytrix M16 uses an open-source GP2040-CE firmware.
- Перад абнаўленнем: It is highly recommended to back up your current settings and take screenshots of all web configurator pages. Firmware updates can sometimes reset settings or change interface elements.
- Post-update issues: If LEDs or the screen are deactivated after an update, you may need to re-enable them through the web configurator, as default firmware settings might disable these features.
- Refer to the official GP2040-CE documentation for detailed instructions on firmware updates and configuration.
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | М16 |
| Памеры (Д х Ш х У) | 27 см х 20 см х 1 см (10.63" х 7.87" х 0.39") |
| Вага | 1.92 фунта (прыблізна 0.87 кг) |
| Набор мікрасхем | GP-2040-CE (40nm process technology) |
| Затрымка | Да 1 мс |
| Выключальнікі | Gateron Low Profile Red Switches (Hot-swappable) |
| RGB асвятленне | 4 preset modes, customizable colors |
| Налада | 7-layer detachable design, DIY artwork support |
| Рэжымы кіравання | X-input, Switch, PS3/D-input, PS4, Keyboard |
| Асаблівасці | Turbo function, SOCD cleaning, M1/M2 custom buttons, embedded web канфігурацыя |
Image: Diagram illustrating the physical dimensions of the Mytrix M16 controller: 27 cm (10.63") length, 20 cm (7.87") width, and 1 cm (0.39") thickness.
Гарантыя і падтрымка
Mytrix is committed to providing quality products and customer satisfaction. For technical support, warranty claims, or any inquiries, please contact Mytrix customer service.
- Абслугоўванне кліентаў: Refer to the Mytrix official webна вашым сайце або на вашай платформе для пакупак, каб атрымаць кантактную інфармацыю.
- Гарантыя: Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for warranty services.