ALITOVE AC to DC Converter 110V to 12V 30A 360W Power Supply

1. Уводзіны

This manual provides instructions for the safe and efficient operation of your ALITOVE AC to DC Converter, Model S-360-12. This device converts alternating current (AC) from a standard wall outlet to direct current (DC) suitable for various 12V electronic devices. Please read this manual thoroughly before use and retain it for future reference.

2. Інфармацыя па бяспецы

WARNING: Improper use can lead to electric shock, fire, or damage to the device. Always follow safety guidelines.

• This power supply is designed for indoor use only.
• Пераканайцеся, што ўвод voltage switch (110V/220V) is set correctly for your region before connecting to power. For USA/CA, set to 110V. For EUR, set to 220V. Incorrect setting can cause damage.
• Always turn off the power switch before making or disassembling any connections.
• Do not exceed 80% of the full load capacity to ensure optimal lifespan. For this 12V 30A 360W unit, power devices less than 288W.
• For resistive devices, the power supply's peak power should be at least 1.25 times the device power.
• For motor devices, the power supply's peak power should be at least 2 times the motor's power.
• Do not disassemble the unit. Non-professionals should not attempt repairs.
• The unit features multiple safety protections including overload cut-off, over voltage cut-off, over temperature cut-off, and short-circuit cut-off.

3. Прадукт скончыўсяview

The ALITOVE S-360-12 is a switching AC/DC power adapter designed for stable 12V output. It features a robust aluminum shell with heat dissipation holes and a temperature-controlled cooling fan for efficient thermal management. The unit includes a red button on/off switch for convenient power control.

Аксэсуары ў камплекце:

• 12V AC/DC Adapter unit
• Car cigarette lighter socket adapter
• Кліпы алігатар
• Heavy-duty copper power cord
• Wire lugs
• Metal clip and screws for mounting

4. Тэхнічныя характарыстыкі

5. Настройка і ўстаноўка

Follow these steps to connect your ALITOVE AC to DC Converter to your 12V device:

1. Step 1: Turn off the power switch. Ensure the red on/off switch on the converter is in the 'OFF' position before making any connections.
2. Step 2: Connect the terminal wire. Place the positive (+) and negative (-) terminal wires from your 12V device into the corresponding screw terminals on the converter. Ensure correct polarity.
3. Step 3: Tighten the screws. Securely tighten the black knob screws to firmly hold the terminal wires in place. A loose connection can cause overheating or malfunction.
4. Step 4: Connect AC power. Plug the provided AC power cord into the converter's AC inlet and then into a standard wall outlet.
5. Крок 5: Уключыце выключальнік сілкавання. Flip the red on/off switch to the 'ON' position. The LED power indicator light will illuminate, indicating the unit is operational.

6. Інструкцыя па эксплуатацыі

Уваходны кнtage Выбар:

Before connecting the power supply to an AC source, verify the input voltagВыбар перамыкача усталяваны на правільны аб'ёмtage for your region (110V for North America, 220V for Europe). This switch is typically located on the side of the unit (refer to Figure 2).

Power Usage Recommendations:

To maximize the lifespan and ensure stable operation of the power supply, it is recommended that the maximum continuous power draw from connected devices does not exceed 80% of the unit's rated power. For this 360W model, the recommended maximum continuous load is 288W.

The built-in temperature-controlled cooling fan will activate automatically when the internal temperature reaches 113°F (45°C) to maintain optimal operating temperature.

7. Дадаткі

This ALITOVE AC to DC Converter is suitable for a wide range of 12V DC devices that require up to 360W of power. Common applications include:

• DC 12V Pumps
• Лябёдкі
• Car Jacks
• Car Stereos and Ampасаднікі
• Радыёстанцыі
• Паветраныя кампрэсары
• Святлодыёдныя стужкі
• Бесщеточные рухавікі
• DVR NVR CCTV Security Camera Systems
• Бытавая тэхніка
• Электронныя прылады
• Дызельныя абагравальнікі
• 3D-прынтэры
• Абсталяванне для аўтаматызацыі

NOTE: This device is NOT suitable for electrolysis tanks.

8. Тэхнічнае абслугоўванне

The ALITOVE AC to DC Converter is designed for reliable operation with minimal maintenance. To ensure longevity:

• Keep the unit clean and free from dust and debris, especially around the ventilation holes and fan.
• Ensure adequate airflow around the unit to prevent overheating. Do not block the fan or vents.
• Store the unit in a dry environment when not in use.
• Regularly check all connections for tightness and ensure no wires are frayed or damaged.

9. Выпраўленне непаладак

If you encounter issues with your ALITOVE AC to DC Converter, consider the following:

• Няма магутнасці:
  • Check if the AC power cord is securely plugged into both the converter and the wall outlet.
  • Ensure the red on/off switch is in the 'ON' position.
  • Праверце ўвод voltage selector switch (110V/220V) is set correctly for your region.
  • Check the connected device for any internal issues or short circuits.
• Перарывістае харчаванне:
  • Inspect all terminal connections for looseness. Tighten if necessary.
  • Ensure the load does not exceed the recommended 80% capacity. Overloading can trigger safety cut-offs.
• Перагрэў:
  • Ensure the unit has sufficient ventilation and the cooling fan is not obstructed.
  • Reduce the load if the unit consistently runs hot.

Калі пасля выканання гэтых крокаў праблемы не знікнуць, звярніцеся ў службу падтрымкі кліентаў.

10. Гарантыя і падтрымка

ALITOVE products undergo rigorous quality control to ensure reliable operation. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ALITOVE website. Please have your model number (S-360-12) and purchase date available when contacting support.