Dasqua Digital Angle Finder Protractor

DASQUA 4-in-1 Digital Angle Finder Protractor User Manual

Model: Digital Angle Finder Protractor

Марка: Dasqua

1. Уводзіны

The DASQUA 4-in-1 Digital Angle Finder is a versatile tool designed for precise angle measurement in various applications such as woodworking, welding, remodeling, and metal fabrication. It integrates the functions of an angle finder, miter calculator, bevel gauge, and level into a single device. This manual provides detailed instructions for the proper setup, operation, and maintenance of your digital angle finder.

DASQUA 4-in-1 Digital Angle Finder with its arm extended

Figure 1: DASQUA 4-in-1 Digital Angle Finder

2. Асаблівасці прадукту

  • 4-у-1 шматфункцыянальны: Combines an angle finder, miter calculator, bevel gauge, and level.
  • High Accuracy & Extended Range: Measures angles from 0° to 220° with a precision of ±0.2°. Features a 425 mm long body with a 400 mm extendable leg.
  • Вялікі ВК-дысплей з падсветкай: Provides clear readings in various lighting conditions.
  • Lock & Hold Function: Allows freezing of readings for easy transfer and relative zeroing at any position.
  • Трывалая канструкцыя: Made from high-grade aluminum with IP54 dust and splash resistance.
  • Інтэграваныя бурбалкавыя ўзроўні: Includes horizontal and vertical bubble levels for standard leveling tasks.
  • Аўтаматычнае адключэнне: Automatically powers off after 5 minutes of inactivity to conserve battery life.
Падрабязны view of the digital angle finder showing its components: aluminum material, horizontal bubble, extension plate, vertical bubble, backlit LCD display, and lock knob.

Figure 2: Key Components of the Angle Finder

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

  • 1 x Digital Angle Finder
  • 1 x Extension Leg
  • 1 х партатыўная сумка
  • 2 батарэйкі LR6 (AA) 1.5 В
  • 1 х Кіраўніцтва карыстальніка (гэты дакумент)
Package contents including the digital angle finder, extension leg, portable bag, and batteries.

Малюнак 3: Камплект пастаўкі

4. Настройка

4.1 Устаноўка батарэі

  1. Locate the battery compartment cover on the main body of the angle finder.
  2. Акуратна зрушце або адшчэпіце вечка, каб адкрыць адсек.
  3. Insert two 1.5V AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Надзейна заменіце крышку батарэйнага адсека.

4.2 Attaching the Extension Leg

The angle finder comes with an extendable leg for increased measurement range.

  1. Align the extension leg with the slot on the main body of the angle finder.
  2. Slide the extension leg into place until it is securely seated.
  3. The extension leg features both metric and inch markings for direct measurement.

Відэа 1: Прадукт скончаныview, Battery Installation, and Extension Leg Attachment. This video demonstrates how to install the batteries, attach the extension leg, and provides a general overview of the angle finder's features and operation.

5. Інструкцыя па эксплуатацыі

5.1 Basic Angle Measurement

  1. Націсніце Укл./Выкл./Нуль кнопка ( ① ) to power on the device. The backlit LCD will display the current angle.
  2. Open the angle ruler by moving the hinged leg. The display will show the angle between the main body and the hinged leg.
  3. Position the angle finder against the surfaces you wish to measure. Ensure both legs are flush with the surfaces for accurate readings.
  4. The measurement range is 0° to 220°.
Digital angle finder measuring an angle, showing its 0-220 degree range and dimensions.

Figure 4: Measuring Range Demonstration

5.2 Функцыі кнопак

Close-up of the digital angle finder's control panel, highlighting the MTR, COM, Hold, 180 degree, and On/Off/Zero buttons.

Figure 5: Control Panel and Button Functions

  • On/Off/Zero ( ① ): Press to power on/off. A short press while on will set the current angle to 0.0° (Relative Zeroing).
  • Трымайце: Press to freeze the current angle reading on the display. Press again to release.
  • 180°: Press to display the supplementary angle (180° minus the measured angle).
  • MTR (Miter Mode): Press to calculate the miter angle for single cuts. The display will show the required miter saw setting.
  • COM (Compound Bevel Cutting Mode): Press to calculate compound miter angles.

5.3 Using the Locking Knob

The red locking knob is located at the pivot point of the angle finder.

  • To secure an angle, turn the locking knob clockwise until the leg is held firmly.
  • To adjust the angle, turn the locking knob counter-clockwise to loosen.
  • Заўвага: The tightener knob provides mechanical stability but is not designed to hold the angle for measurement transfer with absolute rigidity. Always verify the angle after locking if precise transfer is critical.

5.4 Using the Bubble Levels

The angle finder includes two bubble levels:

  • One horizontal bubble level for checking level surfaces.
  • One vertical bubble level for checking plumb surfaces.
  • Use these in conjunction with the digital display for comprehensive leveling and angle finding tasks.
Collage of images showing the digital angle finder being used for various applications: outer edge measurement, inner edge measurement, horizontal transverse detection, and vertical horizontal detection.

Figure 6: Wide Applications of the Angle Finder

6. Тэхнічнае абслугоўванне

  • Уборка: Працірайце прыладу мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
  • захоўванне: Store the angle finder in its portable bag in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods to prevent leakage.
  • Замена батарэі: Replace batteries when the display becomes dim or the device fails to power on.
  • Каліброўка: The device is factory calibrated. If you suspect inaccuracies, perform a relative zeroing on a known flat surface.

7. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Дысплей пусты або цьмяны.Разраджаныя або слабыя батарэі. Няправільная ўстаноўка батарэй.Replace batteries with new 1.5V AA batteries. Ensure correct polarity.
Inaccurate angle readings.Device not properly zeroed. Obstruction between legs.Perform relative zeroing by pressing the On/Off/Zero button on a flat surface. Ensure legs are clean and fully extended/closed as needed.
Locking knob does not hold angle firmly.Knob not tightened sufficiently. Design limitation.Tighten the knob firmly. Be aware that the knob provides mechanical stability but may not offer absolute rigidity for all applications.
Auto shut-off occurs too quickly.Normal operation (5 minutes of inactivity).This is a power-saving feature. Press any button to reactivate the display.

8. Тэхнічныя характарыстыкі

  • Дыяпазон вымярэнняў: ад 0° да 220°
  • Дакладнасць: ±0.2°
  • Angle Calculation Accuracy: Up to ±0.1°
  • Даўжыня ног: 425 mm (main body) with 400 mm extendable leg
  • матэрыял: Высакаякасны алюміній
  • Ступень абароны: IP54 (пыла- і пырскаўстойлівы)
  • Дысплей: LCD з падсветкай
  • Крыніца харчавання: 2 х 1.5В батарэі AA
  • Аўтаматычнае адключэнне: Пасля 5 хвілін бяздзейнасці
  • Вага прадмета: 1.28 фунта
  • Памеры ўпакоўкі: 17.87 х 9.17 х 1.77 цалі

9. Гарантыя і падтрымка

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Dasqua customer service directly. Specific warranty terms may vary by region and retailer.

вытворца: Даскуа